Refine Your Search

Date

Date

Topic

Topic

A-5 Aerospace Landing Gear Systems Committee Chassis

Search Results

Viewing 1 to 20 of 40
12Next >Last >>
Sort by relevance
Standard

Landing Gear Based Weight and Balance Systems
2019-04-18
WIP
AIR6941
This document outlines historical systems which have used the landing gear as a sensor or installation point for full aircraft weight and balance systems. A number of systems have been developed, installed, certified, and placed in service but few systems remain in regular use. The document will capture the history of these systems, reasons (where known) for their withdrawal from service, and lessons learned.
Standard

Runway Condition Monitoring Systems
2022-04-13
WIP
AIR6697
This report will document Runway Condition Monitoring systems that provide information intended to reduce or eliminate aircraft runway excursions or overruns that may occur as a result of poor runway conditions.
Standard

Rotorcraft: Application of Existing Aircraft Designed Tires, Wheels and Brakes
2021-04-23
CURRENT
ARP5632
This document covers recommendations for the application of existing qualified and approved in-service fixed wing aircraft tires, wheels and brakes to military and commercial rotorcraft. NOTE: This document does not address the use of radial tires due to insufficient data to support their approved use on rotorcraft, see paragraph 4.3.14 for specific impact on ground resonance.
Standard

SKID CONTROL PERFORMANCE
1991-10-31
HISTORICAL
ARP862A
This Aerospace Recommended Practice (ARP) provides recommended methods for measuring performance of skid control systems. It includes test items and equipment.
Standard

SKID CONTROL PERFORMANCE EVALUATION
1968-03-01
HISTORICAL
ARP862
This document provides recommended methods for measuring performance of skid control systems. It includes test items and equipment.
Standard

RECOMMENDED PRACTICE FOR MEASUREMENT OF STATIC MECHANICAL STIFFNESS PROPERTIES OF AIRCRAFT TIRES
1997-01-01
HISTORICAL
AIR1380A
The static mechanical stiffness properties of aircraft tires are fundamental to any computation of wheel and landing gear shimmy characteristics, and are important guides in anti-skid system and aircraft wheel design. While the mechanical stiffness properties of aircraft tires are frequency sensitive, the static or low frequency values are important because they are the ones most easily obtained by laboratory testing and are most commonly found in literature. The following recommended methods for measurement of such properties are believed to represent practices which will give reliable and repeatable measurements, either at one facility or among different facilities, using equipment which is commonly available in most tire testing installations.
Standard

Recommended Practice for Measurement of Static Mechanical Stiffness Properties of Aircraft Tires
2002-02-28
CURRENT
AIR1380B
The static mechanical stiffness properties of aircraft tires are fundamental to any computation of wheel and landing gear shimmy characteristics, and are important guides in anti-skid system and aircraft wheel design. While the mechanical stiffness properties of aircraft tires are frequency sensitive, the static or low frequency values are important because they are the ones most easily obtained by laboratory testing and are most commonly found in literature. The following recommended methods for measurement of such properties are believed to represent practices which will give reliable and repeatable measurements, either at one facility or among different facilities, using equipment which is commonly available in most tire testing installations.
Standard

Effects of Extremely Cold Temperature on Landing Gear Operation
2022-03-29
CURRENT
AIR6411
This SAE Aerospace Information Report (AIR) provides information on landing gear operation in cold temperature environments. It covers all operational aspects during ground handling, takeoff, and landing. It includes effects on tires, brakes, shock struts, seals, and actuators.
Standard

Steering Effect of Tilted, Free-Swiveling Nose Gears
2017-05-04
HISTORICAL
AIR4358
This Aerospace Information Report (AIR) considers the origin of cornering forces generated by tilted, free-swiveling nose gears; the effect of various landing gear parameters on the measured cornering forces; and a method of towing aircraft to measure the resulting steering forces.
Standard

Steering Effect of Tilted, Free-Swiveling Nose Gears
2022-06-27
CURRENT
AIR4358A
This Aerospace Information Report (AIR) considers the origin of cornering forces generated by tilted, free-swiveling nose gears; the effect of various landing gear parameters on the measured cornering forces; and a method of towing aircraft to measure the resulting steering forces.
Standard

Aerospace Landing Gear - FAA Regulatory History - Airplane Wheels, Tires, and Brakes
2007-08-02
HISTORICAL
AIR5697
This SAE Aerospace Information Report (AIR) contains regulatory and guidance information related to airplane wheels, tires, and brakes. It contains certain Civil Air Regulations (CAR) and Federal Aviation Regulations (formerly referred to as FARs) from Title 14 Code of Federal Regulations (CFR) in their current version as well as the historical versions. This gives the reader an ability to assemble certain CAR/CFR parts as they existed at any date in the past (referred to as a Regulatory Basis). A certain amount of preamble explanatory material is included, which led to the regulatory rule changes (Amendments to the CFR).
Standard

Aerospace Landing Gear - FAA Regulatory History - Airplane Wheels, Tires, and Brakes
2012-10-15
CURRENT
AIR5697A
This SAE Aerospace Information Report (AIR) contains regulatory and guidance information related to airplane wheels, tires, and brakes. It contains certain Civil Air Regulations (CAR) and Federal Aviation Regulations (formerly referred to as FARs) from Title 14 Code of Federal Regulations (CFR) in their current version as well as the historical versions. This gives the reader an ability to assemble certain CAR/CFR parts as they existed at any date in the past (referred to as a Regulatory Basis). A certain amount of preamble explanatory material is included, which led to the regulatory rule changes (Amendments to the CFR).
Standard

A Guide for the Damaging Effects of Tire and Wheel Failures
2022-07-06
CURRENT
AIR5699A
Consideration for the damaging effects to aircraft from the failure of wheels and tires should be evaluated. This document discusses the types of problems in-service aircraft have experienced and methodology in place to assist the designers when evaluating threats for new aircraft design. The purpose of this document is to provide a history of in-service problems, provide a historical summary of the design improvements made to wheels and tires during the past 40 years, and to offer methodology which has been used to help designers assess the threat to ensure the functionality of systems and equipment located in and around the landing gear and in wheel wells.
Standard

Landing Gear Storage
2021-04-23
CURRENT
ARP5936
This document categorizes the different types of storage requirements, either on the aircraft or new unused or overhauled on the shelf, for aircraft landing gears/components. Recommendations and examples of proper landing gear storage are outlined. Reclamation recommendations are provided for aircraft landing gear returning from long-term storage.
Standard

Catalog of Landing Gear Systems and Suppliers
2021-02-03
CURRENT
AIR5631A
The purpose of this document is to provide a listing for current commercial and military aircraft landing gear systems and their types and manufacturers. Data has been provided for the following commercial aircraft types; wide body jet airliners, narrow body jet airliners, and turboprop/commuter aircraft and the following military aircraft types; fighter, bomber, cargo, attack, surveillance, tanker and helicopter categories. The aircraft that have been included in this document are in operational service either with airlines, business, cargo or military operators. No information is presented for aircraft that are currently being developed or that are not in extensive usage. This document will provide an informational reference for landing gear engineers to access when evaluating other gear and aircraft systems. Future revisions of this document will add aircraft as they enter into service.
Standard

Catalog of Landing Gear Systems and Suppliers
2009-02-19
HISTORICAL
AIR5631
The purpose of this document is to provide a listing for current commercial and military aircraft landing gear systems and their types and manufacturers. Data has been provided for the following aircraft types: wide body jet airliners, narrow body jet airliners, turboprop/commuter aircraft, cargo/transport aircraft and fighter/attack aircraft. The aircraft that have been included in this document are in operational service either with airlines, business, cargo or military operators. No information is presented for aircraft that are currently being developed or that are not in extensive usage. This document will provide an informational reference for landing gear engineers to access when evaluating other gear and aircraft systems.
12Next >Last >>
X