Criteria

Text:
Display:

Results

Viewing 1 to 30 of 173
2013-10-31
WIP Standard
AIR6287
The purpose of this SAE Aerospace Information Report (AIR) is to provide information regarding the basic requirements for environmental effects of composite materials used in ULDs. Material variances related to raw materials and manufacturing processes is not part of this information, nor is damage tolerance.
2014-12-05
WIP Standard
AIR1869D
This SAE Aerospace Information Report (AIR) covers information relative to ULDs (Unit Load Devices) container and pallet configurations, maximum usable container, pallet and bulk compartment volumes and tare weights for the lower deck of various wide-body aircraft. Bulk compartment volumes are also included for standard-body aircraft. This document brings together data concerning the lower deck capacity of wide-body and standard- body airplanes. The information includes airplanes manufactured by Airbus, Boeing, British Aerospace, British Aircraft, Fokker-VFW, Hawker Siddeley, Ilyushin, Lockheed and McDonnell- Douglas.
2012-02-22
WIP Standard
AS1492C
This document establishes dimensional, structural, and environmental requirements for two types of interline pallet nets. Type II covers NAS 3610 code sizes and Type III covers other sizes not currently includes in NAS 3610.
2012-02-22
WIP Standard
AS1491B
This Aerospace Standard establishes minimum requirements for pallets used to transport cargo in aircraft equipped with NAS 3610 restraint systems, except as noted, and using nets meeting the requirements of AS 1492. The minimum essential criteria are identified by the use of the key word "shall". Recommended criteria are identified by the key word "should" and while not mandatory are considered to be of primary importance in providing servicable, economical, and practical air transport pallets. Deviation from the recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternate methods to be satisfactory.
2010-09-14
WIP Standard
ARP5486A
Purpose: Air cargo pallets and their cargo restraint nets constitute aircraft Unit Load Devices, defined by industry standards and airworthiness certified based on Technical Standard Order (TSO) C90c in accordance with the requirements of NAS 3610. This guarantees their design to be intrinsically safe for flight on board compatible aircraft types. However, actual flight safety also requires these certified pieces of equipment to be properly used: numerous occurrences have demonstrated a certified ULD can nevertheless jeopardize flight safety if loaded or restrained in an inadequate manner.
2013-09-26
WIP Standard
AS6278
This Standard specifies the minimum design and performance criteria and testing methods of passive fire resistant containers ( FRCs ) for carriage on aircraft main deck, to be used: (a) either in those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, (b) or on a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not currently mandate their use.
2015-10-20
WIP Standard
ARP5741A
This Aerospace Recommended Practice (ARP) defines a series of test procedures to determine the temperature conditioning performance of air mode containers with active conditioning systems, a classification system for air mode containers with active condition systems, a standard means of expressing conditioning performance within each classification and a standard means of documenting test results.
CURRENT
2014-01-03
Standard
AS5896
This SAE Aerospace Standard (AS) covers the design, fabrication, performance, and testing requirements for general-purpose, base-restrained, containers requiring airworthiness approval for installation/use in aircraft lower deck compartments. See 10.1 and 10.2.
CURRENT
2015-12-19
Standard
AS6163
This SAE Aerospace Standard (AS) defines the minimum performance standard to demonstrate compliance with the regulatory design, test and operational requirements for a Temperature Controlled Container (TCC).
CURRENT
2014-12-28
Standard
ARP5492A
This SAE Aerospace Recommended Practice (ARP) provides recommendations for aircraft manufacturers and operating carriers about how to establish common information for the use of cargo systems with missing/inoperative restraints. Because of the fact that the certified restriction requirements due to missing/inoperative restraints are dependent of the specific aircraft structure and the system layout of the cargo loading system, this document shall only recommend common layout of information for the users based on the certified data provided to allow for common training, understanding and handling. This shall be used right from the beginning for future aircraft types for certified data.
CURRENT
2011-09-23
Standard
ARP6022A
The purpose of this SAE Aerospace Recommended Practice (ARP) is to standardize the basic design, performance and testing requirements for "Cargo Stoppers" cargo tie-down accessories to be used in conjunction with approved tie-down straps meeting AS5385C requirements.
CURRENT
2014-03-25
Standard
AS1825C
The scope of this SAE Aerospace Standard (AS) shall cover the methodology of defining and determining the "internal volumes" of both the main deck and lower deck aircraft cargo compartments. The minimum required clearance between the compartment envelope and the unit load devices (ULDs) shall also be stated in order to provide the maximum ULD external contour and the methodology to define the ULD internal volumes.
CURRENT
2013-06-27
Standard
AS1677D
This SAE Aerospace Standard (AS) covers the design, fabrication, performance and operational testing requirements for lower deck containers for use in main line aircraft which do not require airworthiness certification when loaded under the conditions of compartment restraint and in accordance with the aircraft's Weight and Balance Manual and/or, where applicable according to the aircraft type's approved Weight and Balance Manual, AS36100A or NAS 3610 equivalent base plate restraint for these containers. Most sizes of containers covered by this document (base sizes K, L, P, and Q) cannot physically be loaded and latched on aircraft main deck cargo systems. Base size A and M containers can, but are not allowed on aircraft main decks, which do not accept non-certified units. Accordingly, all containers covered by this document are to be used/installed exclusively in aircraft lower deck compartments.
CURRENT
2011-11-23
Standard
AS21237A
CURRENT
2016-02-24
Standard
AS1988B
This SAE Aerospace Standard (AS) establishes the dimensional and operational requirements for pallet extension devices. It provides support for items of cargo beyond either the short or the long sides of a pallet, allowing increased volume to be achieved in conjunction with pallets meeting the requirements of AS1491 plus additional pallet sizes usable with extensions.
CURRENT
2011-12-12
Standard
ARP4049A
This SAE Aerospace Recommended Practice (ARP) establishes the basic recommendations for the following two types of configuration for securing cargo to aircraft passenger seats on transport category aircraft: It is emphasized that the two types of restraint shown are merely examples of methods currently used and does not imply that alternative methods are not acceptable. For the purposes of this document, the minimum essential criteria are identified by the use of the key word "shall," Recommended criteria are identified by the use of the key word "should," and while not mandatory are considered to be of significant importance in providing safe, economical, and practical means of cargo restraint. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternative methods to be satisfactory.
CURRENT
2012-01-05
Standard
ARP5596B
This SAE Aerospace Recommended Practice (ARP) specifies guidelines for calculating and performing shoring (load spreading) required on board civil transport aircraft whenever a piece of cargo to be carried exceeds the aircraft's maximum allowable limits in area load, running load, or both. It provides both the engineering methods needed to properly design a shoring arrangement, and the main practical dos and donts known from experience to ensure its effectiveness in protecting the aircraft's structure against overload.
CURRENT
2002-02-24
Standard
AS1131C
This SAE Aerospace Standard (AS) provides dimensional, structural and environmental requirements for pallet nets to be used in conjunction with 2.44 m (8 ft) wide pallets described in AS1130. The pallet/net combination are used in freighter versions of certificated aircraft equipped to provide restraint to pallets tested to the requirements of NAS 3610 Class II restraint system. The minimum essential criteria are identified by use of the key word "shall". Recommended criteria are identified by use of the key word "should", and while not mandatory, are considered to be primary importance in providing serviceable, economical, and practical air transport pallet nets. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternate methods to be satisfactory.
CURRENT
2014-03-25
Standard
AS832G
This SAE Aerospace Standard (AS) establishes the basic requirements for the specification and testing of air surface (intermodal) 8 ft × 8 ft (2.44 m × 2.44 m) cross-section containers. The basic requirements for the air/surface (intermodal) container are presented in Sections 3 to 6 while the detailed design requirements are in Appendix A. Appendix B describes the sections of other standards that apply to air/surface containers. Appendix C describes uniformity of test apparatus and methods. These appendices shall be referred to for important supplemental requirements and procedures for this document. AS4041 presents the requirements for air mode general purpose containers. Requirements for containers to be transported by rotary-wing aircraft are excluded from this document. NOTE: The essential basic and detail criteria are identified by use of the key word "shall."
CURRENT
2012-12-03
Standard
AS8905A
This specification establishes requirements for two types of aircraft floor fittings for tiedown of cargo and seats, and two types of cargo tiedown rings.
CURRENT
2011-09-07
Standard
ARP1334C
This SAE Aerospace Recommended Practice (ARP) specifies requirements for those portions of the aircraft Unit Load Device ground and terminal handling equipment that will have a direct bearing on the life of the ULD for the purpose of preventing undue wear on the ULD. Past experience has shown that in-service defects in regard to the above equipment cause high ULD cost. Greater control of maintenance is required.
CURRENT
2008-08-13
Standard
AIR36106A
This SAE Aerospace Information Report (AIR) provides instructions for intended proper use of Aerospace Standard AS36100A, published 2006-04 [TSO pending], as the technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded on board civil transport aircraft. For consistency and cross-checking purposes, it also includes instructions for proper use of previous NAS 3610 [Revision 10, 1990, referenced in TSO C90c], as commonly understood by the industry.
CURRENT
2008-07-05
Standard
AIR36108
This Aerospace Information Report (AIR) provides a record of the development by SAE AGE-2A Air Cargo Sub-Committee of Aerospace Standard AS36100, Air Cargo Unit Load Devices — Performance Requirements and Test Parameters, published 2005-02, and its revision A published 2006-04, intended as a technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft, and to partly supersede previously used NAS 3610, Cargo unit load devices - Specification for — [ Revision 10, 1990, referenced in TSO C90(c) ].
CURRENT
2014-09-30
Standard
AIR1673B
Manufacturers/designers of all aircraft equipped with a pallet/container capability have provided a means of linking the ground loaders/elevators with the aircraft sill for the smoother transfer of pallets and containers into or out of the aircraft holds. Use of the aircraft attachment points may be used as a means of averting damage to the aircraft door frames and other important parts. Latch-on guarantees fore and aft and vertical alignment of the loader bed with the aircraft doorway, when used in conjunction with the appropriate ground equipment. This SAE Aerospace Information Report (AIR) has been prepared by SAE Subcommittee AGE-2A to present a review of the current range of aircraft attachment points on wide body aircraft and those narrow body aircraft with a ULD cargo capability. Airline operators, who utilized these facilities, have been faced with a growing number of adaptor bars necessary to suit each type of aircraft and door position.
CURRENT
2012-11-01
Standard
AIR4165A
This SAE Aerospace Information Report (AIR) is intended to assist the user (aircraft manufacturer/airline) in the following areas: In the decision of whether or not to plan for the installation of a powered drive system in the cargo loading system (CLS) during the definition of the aircraft on-board cargo loading system. If a powered drive system is decided upon, to provide general requirements to be considered during the preparation of component specifications for the powered drive units (PDUs) to be used. This provides a selection of criteria in order to obtain an optimum PDU for the application considered.
CURRENT
2016-05-24
Standard
AIR4359A
This SAE Aerospace Information Report (AIR) provides information on the subject of Air Mode containers used for transporting "Hanging Loads" such as Garment-On-Hangers (GOH), or other roof supported cargo. It suggests considerations and recommendations for roof loaded containers to transport hanging loads efficiently and safely by air and to protect the aircraft floor and cargo system from damage due to overload conditions.
HISTORICAL
1997-11-01
Standard
AIR4359
This SAE Aerospace Information Report (AIR) provides information on the subject of Air Mode containers used for transporting “Hanging Loads” such as Garment-On-Hangers (GOH), or other roof supported cargo. It suggests considerations and recommendations for roof loaded containers to transport hanging loads efficiently and safely by air and to protect the aircraft floor and cargo system from damage due to overload conditions.
CURRENT
2013-03-01
Standard
ARP1757B
The symbols specified in this SAE Aerospace Recommended Practice (ARP) are applicable to all aircraft cargo handling systems for lower deck as well as for upper deck systems. Utilizing the symbols the conveyance, guidance, restraint, power drive unit and the degree of automation for the total cargo handling system can be depicted.
Viewing 1 to 30 of 173