Search Results

Standard

Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching

2021-06-28

CURRENT

AMS4128E

This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.7 mm) to 8.000 inches (203.2 mm) in nominal diameter or least difference between parallel sides and up to 50 square inches (322.6 square centimeters) in cross-sectional area (see 8.7).

Standard

ALUMINUM ALLOY, HAND FORGINGS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7452) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated

1997-01-01

HISTORICAL

MAM4323A

This specification covers an aluminum alloy in the form of hand forgings procured to metric dimensions.

Standard

ALUMINUM ALLOY ALCLAD 7178, PLATE AND SHEET

1997-08-01

HISTORICAL

AMSQQA250/15

This specification covers the specific requirements for 7178 aluminum alloy alclad plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness bonded to both surfaces.

Standard

ALUMINUM ALLOY, 7178-T76, ALCLAD PLATE AND SHEET, IMPROVED EXFOLIATION RESISTANT

1997-08-01

HISTORICAL

AMSQQA250/22

This specification covers the specific requirements for improved exfoliation resistant alclad aluminum alloy 7178-T76 sheet and -T7651 plate. The general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness, bonded to both surfaces.

Standard

ALUMINUM ALLOY, 7011 ALCLAD 7178 PLATE AND SHEET

1997-08-01

HISTORICAL

AMSQQA250/28

This specification covers the specific requirements for 7178 aluminum alloy, 7011 alclad, plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable 7178 aluminum alloy core with thin layers of a 7011 aluminum alloy anodic to the core and of approximately equal thickness, bonded to both surfaces.

Standard

BEARINGS, SILVER CLAD STEEL STRIP

1979-10-15

HISTORICAL

AMS4816A

This specification covers a low-alloy steel strip clad on one or both faces with silver in the form bearing stock or finished bearings.

Standard

BEARINGS, LEADED BRONZE 71.5Cu - 25Pb - 3.0Sn Steel Back

1979-10-15

HISTORICAL

AMS4822C

This specification covers bearings of a leaded bronze cast on one or both faces of a steel backing.

Standard

Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated Dendrite Arm Spacing (DAS) Controlled

2002-03-21

HISTORICAL

AMS4241B

This specification covers an aluminum alloy in the form of castings.

Standard

Magnesium Alloy Castings, Permanent Mold 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated

2020-10-20

CURRENT

AMS4484L

This specification covers a magnesium alloy in the form of permanent mold castings.

Standard

ALUMINUM ALLOY SHEET, ALUMINUM ALLOY CLAD 1Mg - 0.6Si - 0.3Cu - 0.25Cr (Alc 61S-T4)

1953-02-01

HISTORICAL

AMS4022A

Standard

ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 1Mg - 0.6Si - 0.25Cu - 0.25Cr (Alc 6061-T4)

1958-08-01

HISTORICAL

AMS4022B

Standard

ALUMINUM ALLOY SHEET, ALUMINUM ALLOY CLAD 1Mg - 0.6Si - 0.3Cu - 0.25Cr (Alc 61S-T4)

1951-10-01

HISTORICAL

AMS4022

Standard

ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (Alclad 6061; -T4 Sheet, -T451 Plate)

1985-04-01

HISTORICAL

AMS4022E

This specification covers an aluminum alloy in the form of sheet and plate.

Standard

ALUMINUM ALLOY SHEET AND PLATE ALCLAD 1Mg - 0.6Si - 0.25Cu - 0.25Cr (Alclad 6061-T4)

1964-06-01

HISTORICAL

AMS4022C

Standard

ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 1.0Mg - 0.60Si - 0.30Cu - 0.25Cr (Alclad 6061; -T4 Sheet, -T451 Plate)

1968-11-01

HISTORICAL

AMS4022D

Standard

ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 5.6Zn - 2.5Mg - 1.6Cu - 0.26Cr (7011 Alclad 7075; -T6 Sheet, -T651 Plate)

1985-04-01

HISTORICAL

AMS4197

Standard

BORON-ALUMINUM COMPOSITE SHEET 50 v/o 5.6B, 2024-0, For Diffusion Bonding

1991-04-01

HISTORICAL

AMS4301B

This specification covers boron filaments and AMS 4007 (2024-0) aluminum alloy foil laminated and bonded into a composite sheet.

Standard

BORON-ALUMINUM COMPOSITE SHEET 50 v/o 5.6B, 2024-0, For Diffusion Bonding

1985-04-01

HISTORICAL

AMS4301A

This specification covers boron filaments and AMS 4007 (2024-0) aluminum alloy foil laminated and bonded into a composite sheet.

Standard

BORON-ALUMINUM COMPOSITE SHEET 50 v/o 5.6B, 2024-0, For Diffusion Bonding

1974-03-01

HISTORICAL

AMS4301

This specification covers boron filaments and 2024-0 (AMS 4007) aluminum-base alloy foil laminated and bonded into a composite sheet.

Standard

ALUMINUM ALLOY FORGINGS Silicon Magnesium Chromium (A51S-T)

1942-12-01

HISTORICAL

AMS4125A