Criteria

Text:
Display:

Results

Viewing 1 to 30 of 96
CURRENT
1986-01-30
Standard
J976_198601
HISTORICAL
1993-06-01
Standard
J975_199306
This SAE Standard provides performance and general design requirements and related test procedures for headlamps for use on agricultural equipment that may be operated on public roads.
CURRENT
2009-05-04
Standard
J975_200905
This SAE Standard provides performance and general design requirements and related test procedures for headlamps for use on agricultural equipment that may be operated on public roads.
HISTORICAL
1988-01-01
Standard
J975_198801
This SAE Standard provides performance and general design requirements and related test procedures for headlamps for use on agricultural equipment that may be operated on public roads.
CURRENT
1992-09-01
Standard
J1041_199209
The test procedures and performance criteria are directed to operation and parking of agricultural tractors equipped with braking system(s) and having a maximum design speed exceeding 6 km/h. Combinations of agricultural towing machines equipped with braking systems and towed agricultural machines without braking systems are included in this SAE Standard.
HISTORICAL
1983-03-01
Standard
J1041_198303
The test procedures and performance criteria are directed to operation and parking of agricultural tractors equipped with braking system(s) and having a maximum design speed exceeding 6 km/h. Combinations of agricultural towing machines equipped with braking systems and towed agricultural machines without braking systems are included in this SAE Standard.
HISTORICAL
1991-10-01
Standard
J1041_199110
The test procedures and performance criteria are directed to operation and parking of agricultural tractors equipped with braking system(s) and having a maximum design speed exceeding 6 km/h. Combinations of agricultural towing machines equipped with braking systems and towed agricultural machines without braking systems are included in this SAE Standard.
CURRENT
2000-09-23
Standard
J1035_198601
HISTORICAL
1991-06-01
Standard
J1170_199106
This SAE Standard establishes the specifications and dimensions that are essential in order that 540 r/min and 1000 r/min power take-off-driven machines may be operated with any make of tractor equipped with the corresponding power take-off drive. This document does not, in itself, insure adequate telescoping of the power line or safety shielding. This document provides dimensions relating to the tractor power take-off shield.
CURRENT
1993-02-01
Standard
J1170_199302
This SAE Standard establishes the specifications and dimensions that are essential in order that 540 r/min and 1000 r/min power take-off-driven machines may be operated with any make of tractor equipped with the corresponding power take-off drive. This document does not, in itself, insure adequate telescoping of the power line or safety shielding. This document provides dimensions relating to the tractor power take-off shield.
HISTORICAL
1977-05-01
Standard
J1170_197705
This SAE Standard establishes the specifications and dimensions that are essential in order that 540 r/min and 1000 r/min power take-off-driven machines may be operated with any make of tractor equipped with the corresponding power take-off drive. This document does not, in itself, insure adequate telescoping of the power line or safety shielding. This document provides dimensions relating to the tractor power take-off shield.
CURRENT
2000-06-28
Standard
J943_200006
This SAE Standard establishes emblem dimensional specifications, performance requirements, related test procedures, and mounting requirements. This unique idenification emblem shall be used only on machines which are designed for and travel at rates of speed less than 40 km/h (25 mph). The identifcation emblem shall supplement but not replace warning devices such as tail lamp regulators or flashing lights and shall not be used to identify stationary objects or stopped vehicles and/or machines. The dimensions and color patterns of the emblem have been established as a unique identification and shall not be altered to permit advertising or other markings on the face of the emblem, except as permitted in 4.2
HISTORICAL
1993-06-01
Standard
J943_199306
This SAE Standard establishes emblem dimensional specifications, performance requirements, related test procedures, and mounting requirements. This unique identification emblem shall be used only on machines which are designed for and travel at rates of speed less than 40 km/h (25 mph). The identification emblem shall supplement but not replace warning devices such as tail lamp regulators or flashing lights and shall not be used to identify stationary objets or stopped vehicles and/or machines. The dimensions and color patterns of the emblem have been established as a unique identification and shall not be altered to permit advertising or other markings on the face of the emblem, except as permitted in 3.2. The purpose of this standard is to establish specifications which define a unique identification emblem to be used only for slow-moving vehicles when operated or traveling on highways.
HISTORICAL
1983-09-01
Standard
J943_198309
This SAE Standard establishes emblem dimensional specifications, performance requirements, related test procedures, and mounting requirements. This unique idenification emblem shall be used only on machines which are designed for and travel at rates of speed less than 40 km/h (25 mph). The identifcation emblem shall supplement but not replace warning devices such as tail lamp regulators or flashing lights and shall not be used to identify stationary objects or stopped vehicles and/or machines. The dimensions and color patterns of the emblem have been established as a unique identification and shall not be altered to permit advertising or other markings on the face of the emblem, except as permitted in 4.2
HISTORICAL
1988-06-01
Standard
J943_198806
This SAE Standard establishes emblem dimensional specifications, performance requirements, related test procedures, and mounting requirements. This unique idenification emblem shall be used only on machines which are designed for and travel at rates of speed less than 40 km/h (25 mph). The identifcation emblem shall supplement but not replace warning devices such as tail lamp regulators or flashing lights and shall not be used to identify stationary objects or stopped vehicles and/or machines. The dimensions and color patterns of the emblem have been established as a unique identification and shall not be altered to permit advertising or other markings on the face of the emblem, except as permitted in 4.2
HISTORICAL
1966-06-01
Standard
J943_196606
This SAE Standard establishes emblem dimensional specifications, performance requirements, related test procedures, and mounting requirements. This unique idenification emblem shall be used only on machines which are designed for and travel at rates of speed less than 40 km/h (25 mph). The identifcation emblem shall supplement but not replace warning devices such as tail lamp regulators or flashing lights and shall not be used to identify stationary objects or stopped vehicles and/or machines. The dimensions and color patterns of the emblem have been established as a unique identification and shall not be altered to permit advertising or other markings on the face of the emblem, except as permitted in 4.2
HISTORICAL
1984-12-01
Standard
J716_198412
This SAE Standard gives the specifications and dimensions for the assembly and clearances common to hydraulically-operated cylinders and to trailing-type farm implements. The specifications given permit the interchangeability of hydraulic operation between tractors equipped with a cylinder and trailing-type implements designed for this purpose, the tractor possessing enough power at its drawbar to operate the implement; and the transference of the hydraulic cylinder from one implement to another. This document applies to three categories of agricultural tractors, as follows in Table 1: This standard is the English translation of ISO 2057 dated 1981-11-15, except where indicated by a double asterisk (which indicates a change, an addition, or deletion) and the addition of SAE reference documents where applicable.
HISTORICAL
1991-03-01
Standard
J716_199103
This SAE Standard gives the specifications and dimensions for the assembly and clearances common to hydraulically-operated cylinders and to trailing-type farm implements. The specifications given permit the interchangeability of hydraulic operation between tractors equipped with a cylinder and trailing-type implements designed for this purpose, the tractor possessing enough power at its drawbar to operate the implement; and the transference of the hydraulic cylinder from one implement to another. This document applies to three categories of agricultural tractors, as follows in Table 1: 1 Up to 35kW 2 30 to 75 kW 3 Over 70 kW
HISTORICAL
1955-06-01
Standard
J717_195506
This SAE Standard establishes specifications for mid- and side-power take-off drives that will be helpful in designing implements. Design of the implement attaching means must be tailored to each tractor, depending on attaching points available and the exact location of the auxiliary shaft.
CURRENT
2003-05-15
Standard
J716_200305
This SAE Standard gives the specifications and dimensions for the assembly and clearances common to hydraulically-operated cylinders and to trailing-type farm implements. The specifications given permit the interchangeability of hydraulic operation between tractors equipped with a cylinder and trailing-type implements designed for this purpose, the tractor possessing enough power at its drawbar to operate the implement; and the transference of the hydraulic cylinder from one implement to another. This document applies to three categories of agricultural tractors, as follows in Table 1: This standard is the English translation of ISO 2057 dated 1981-11-15, except where indicated by a double asterisk (which indicates a change, an addition, or deletion) and the addition of SAE reference documents where applicable.
HISTORICAL
1987-02-01
Standard
J717_198702
This SAE Standard establishes specifications for mid- and side-power take-off drives that will be helpful in designing implements. Design of the implement attaching means must be tailored to each tractor, depending on attaching points available and the exact location of the auxiliary shaft.
HISTORICAL
1975-05-01
Standard
J709C_197505
This SAE Standard establishes loadings, tangential pull values, and inflation pressure relationships for tire sizes and ply ratings currently used on agricultural tractors. Primary purpose of this recommendation is for use with SAE J708 May59. The performance of the tractor is materially affected by tire loadings, tire tangential pull values, and inflation pressure; therefore, it becomes desirable to publish this information.
CURRENT
2009-08-17
Standard
J709_200908
This SAE Standard establishes loadings, tangential pull values, and inflation pressure relationships for tire sizes and ply ratings currently used on agricultural tractors. Primary purpose of this recommendation is for use with SAE J708 May59. The performance of the tractor is materially affected by tire loadings, tire tangential pull values, and inflation pressure; therefore, it becomes desirable to publish this information.
HISTORICAL
1977-05-01
Standard
J709_197705
This SAE Standard establishes loadings, tangential pull values, and inflation pressure relationships for tire sizes and ply ratings currently used on agricultural tractors. Primary purpose of this recommendation is for use with SAE J708 May59. The performance of the tractor is materially affected by tire loadings, tire tangential pull values, and inflation pressure; therefore, it becomes desirable to publish this information.
HISTORICAL
1975-09-01
Standard
J712A_197509
The purpose of this SAE Recommended Practice is to provide a selection of disc wheels for industrial and agricultural application with a maximum of interchangeability. This is accomplished by establishing five groups of disc wheels, in each of which the hub mounting elements are common. These groups are designated 4 bolt, 5 in bolt circle; 5 bolt, 4.5 in bolt circle; 5 bolt, 5.5 in bolt circle; 6 bolt, 6 in bolt circle; and 8 bolt, 8 in bolt circle. Further, this document establishes an SAE part number and the maximum rated radial load for each standard wheel. In addition, the document requires the wheel manufacturer's name or trademark to be impression stamped on the wheel with location at the discretion of the manufacturer.
HISTORICAL
1977-09-01
Standard
J712A_197709
The purpose of this SAE Recommended Practice is to provide a selection of disc wheels for industrial and agricultural application with a maximum of interchangeability. This is accomplished by establishing five groups of disc wheels, in each of which the hub mounting elements are common. These groups are designated 4 bolt, 5 in bolt circle; 5 bolt, 4.5 in bolt circle; 5 bolt, 5.5 in bolt circle; 6 bolt, 6 in bolt circle; and 8 bolt, 8 in bolt circle. Further, this document establishes an SAE part number and the maximum rated radial load for each standard wheel. In addition, the document requires the wheel manufacturer's name or trademark to be impression stamped on the wheel with location at the discretion of the manufacturer.
HISTORICAL
1986-06-01
Standard
J712_198606
The purpose of this SAE Recommended Practice is to provide a selection of disc wheels for industrial and agricultural application with a maximum of interchangeability. This is accomplished by establishing five groups of disc wheels, in each of which the hub mounting elements are common. These groups are designated 4 bolt, 5 in bolt circle; 5 bolt, 4.5 in bolt circle; 5 bolt, 5.5 in bolt circle; 6 bolt, 6 in bolt circle; and 8 bolt, 8 in bolt circle. Further, this document establishes an SAE part number and the maximum rated radial load for each standard wheel. In addition, the document requires the wheel manufacturer's name or trademark to be impression stamped on the wheel with location at the discretion of the manufacturer.
CURRENT
1977-01-30
Standard
J724_197701
HISTORICAL
1991-03-01
Standard
J725_199103
This SAE Standard defines mounting devices for use with warning lamps and SMV emblems.
CURRENT
2003-01-24
Standard
J725_200301
This SAE Standard defines mounting devices for use with warning lamps and SMV emblems.
Viewing 1 to 30 of 96