Criteria

Text:
Topic:
Display:

Results

Viewing 1 to 30 of 45
CURRENT
1988-10-01
Standard
J1836_198810
This recommended practice defines a procedure for the construction of a lap shear specimen for the purpose of testing the bondability of an automotive sealant adhesive to the elastomeric material used in automotive encapsulating. The present practice of encapsulating automotive glass is described as molding elastomeric material onto the outer edge of the glass using thermoplastic or thermosetting material that quickly sets in the mold. The glass is removed from the mold with cured elastomeric material bonded to the perimeter of thee glass. This encapsulated glass module can now be bonded with a sealant adhesive into the body opening of a vehicle.
CURRENT
1987-05-01
Standard
J1851_198705
This SAE Recommended Practice defines a procedure for determining the adhesion strength characteristics of heat-cured metal bonding adhesives subjected to induction heating.
CURRENT
1989-06-01
Standard
J1847_198906
This SAE Recommended Practice applies to the abrasion resistance testing of decorative tapes, graphics, and pin striping. It may also have relevance to certain vehicle labels and plastic wood grain film. The resistance to abrasive damage is judged qualitatively by its effect on the legibility, pattern, and color of the graphic marking. This recommended practice is intended as a guide toward standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering the use of this recommended practice.
CURRENT
1996-03-01
Standard
J1864_199603
This SAE Recommended Practice sets forth a method for measuring pressure-induced separation in automotive sealers and determining the likelihood of equipment failure due to this separation, also known as "caking."
HISTORICAL
1993-11-01
Standard
J1864_199311
This SAE Recommended Practice sets forth a method for measuring pressure-induced separation in automotive sealers and determining the likelihood of equipment failure due to this separation, also known as "caking."
HISTORICAL
1987-04-01
Standard
J1864_198704
This SAE Recommended Practice sets forth a method for measuring pressure-induced separation in automotive sealers and determining the likelihood of equipment failure due to this separation, also known as "caking."
CURRENT
1993-11-01
Standard
J1863_199311
This SAE Recommended Practice defines a procedure for determining the cleavage strength of an adhesive used for bonding automotive oily metal substrates.
HISTORICAL
1987-04-01
Standard
J1863_198704
This SAE Recommended Practice defines a procedure for determining the cleavage strength of an adhesive used for bonding automotive oily metal substrates.
CURRENT
1994-04-21
Standard
J1700_199404
This SAE Recommended Practice shall be used to determine the temperature at which an adhesive softens to the point at which it no longer can support a given load.
CURRENT
1988-10-01
Standard
J1907_198810
This recommended practice defines a procedure for the construction and testing of a 180 deg peel specimen for the purpose of determining the bondability of glass to elastomeric material in automotive modular glass. This test method suggests that elastomeric material of less than 172 mpa modulus be used as the encapsulating material. The present practice of encapsulating automotive glass is described as molded-in-place elastomeric material onto the outer edge of the glass using thermoplastic or thermosetting material that quickly sets in the mold. The glass is removed from the mold with the cured elastomeric material bonded to the perimeter of the glass. This encapsulated glass module can now be bonded with a sealant adhesive into the body opening of a vehicle.
CURRENT
2002-01-25
Standard
J1918_200201
This SAE Recommended Practice sets forth methods for determining total expansion gravimetrically and volumetrically, calculating vertical expansion and measuring the water absorption of cut and uncut sealer beads.
2013-06-13
WIP Standard
J1722
This SAE Standard describes a test procedure to determine the shear adhesion strength of adhesive systems used for bonding stationary glass or encapsulated glass to various substrates.
2013-06-13
WIP Standard
J1721
This SAE Standard describes a laboratory test procedure to determine the length of time necessary for a specific glass bonding primer to “link-up” or cure to a specific substrate.
2013-06-13
WIP Standard
J1720
This SAE Standard describes a qualitative method for screening of adhesive systems to paint, glass, or appropriate substrate.
CURRENT
2013-07-09
Standard
J1800_201307
This SAE Recommended Practice sets forth a method for testing and evaluating the paintable characteristics of automotive sealers. This document contains three samples preparation procedures: Method #1: Topcoat over cured primer and cured sealer Method #2: Topcoat over cured sealer Method #3: Topcoat over uncured sealer
HISTORICAL
1987-04-01
Standard
J1800_198704
This SAE Recommended Practice sets forth a method for testing and evaluating the paintable characteristics of automotive sealers. this document contains three samples preparation procedures: Method 1 - topcoat over cured primer and cured sealer; Method 2 - topcoat over cured sealer; and Method 3 - topcoat over uncured sealer. This SAE test specification is to be used as a method for evaluating the performance of automotive primers and/or topcoats when applied over "cured" or "uncured" sealers. This specification includes a list of the needed test equipment, application and baking parameters, and a glossary of terms describing undesirable characteristics that should be noted by the tester. This specification covers the performance and quality of an automotive topcoat when applied over a sealer, along with the integrity of bond between the paint and sealer.
CURRENT
2001-01-03
Standard
J1600_200101
This SAE Recommended Practice describes a method for evaluating the adhesion characteristics of automotive sealers including the determination of the minimum film thickness necessary to cohesive failure and the measurement of peel strength.
HISTORICAL
1987-07-01
Standard
J1600_198704
This SAE Recommended Practice describes a method for evaluating the adhesion characteristics of automotive sealers including the determination of the minimum film thickness necessary to cohesive failure and the measurement of peel strength.
CURRENT
1995-04-01
Standard
J1553_199504
This SAE Recommended Practice describes a cross peel test method for use in measuring the bonding characteristics of automotive-type adhesives for joining fiber-reinforced plastics to themselves and to metals.
2013-03-14
WIP Standard
J1553
This SAE Recommended Practice describes a cross peel test method for use in measuring the bonding characteristics of automotive-type adhesives for joining fiber-reinforced plastics to themselves and to metals.
HISTORICAL
1986-05-01
Standard
J1553_198605
This SAE Recommended Practice describes a cross peel test method for use in measuring the bonding characteristics of automotive-type adhesives for joining fiber-reinforced plastics to themselves and to metals.
CURRENT
1994-04-21
Standard
J1679_199404
This SAE Recommended Practice shall be used to determine the peel strength achieved by an adhesive when used to bond various decorative, flexible substrates such as cloth supported vinyl or carpet, to rigid (steel), semi-rigid (SMC plastic), or other similar substrates.
CURRENT
2001-12-11
Standard
J1437_200112
The purpose of this SAE Recommended Practice is to establish recommended lead-free paint color offsets to two specific color standards currently based on lead-containing pigments. The colors are identified throughout the industry as 'School Bus Yellow' and 'Highway Orange.'
HISTORICAL
1985-06-01
Standard
J1524_198506
This SAE Recommended Practice contains a series of test methods for use in measuring the viscosity of automotive-type adhesives, sealers, and deadeners. The test methods which are contained in this document are as follows: Brookfield Method; Castor-Severs Rheometer or Pressure Flowmeter; Penetrometer, Capillary Rheometer and Plate Rheometers.
HISTORICAL
1985-06-01
Standard
J1525_198506
This SAE Recommended Practice describes a lap shear test method for use in measuring the bonding characteristics of automotive-type adhesives for joining fiber reinforced plastics to themselves and to metals.
2011-12-13
WIP Standard
J1524
This SAE Recommended Practice contains a series of test methods for use in measuring the viscosity of automotive-type adhesives, sealers, and deadeners. The test methods which are contained in this document are as follows: Brookfield Method; Castor-Severs Rheometer or Pressure Flowmeter; Penetrometer, Capillary Rheometer and Plate Rheometers.
CURRENT
2012-02-17
Standard
J1523_201202
This SAE Recommended Practice defines a procedure for determining shear strengths of adhesives used for bonding automotive oil metal substrates.
HISTORICAL
1993-11-01
Standard
J1523_199311
This SAE Recommended Practice defines a procedure for determining shear strengths of adhesives used for bonding automotive oil metal substrates.
HISTORICAL
1985-06-01
Standard
J1523_198506
This SAE Recommended Practice defines a procedure for determining shear strengths of adhesives used for bonding automotive oil metal substrates.
Viewing 1 to 30 of 45