Criteria

Text:
Topic:
Display:

Results

Viewing 1 to 16 of 16
HISTORICAL
2002-07-08
Standard
J1887_200207
This SAE Standard covers the mechanical and physical requirements for Compacted Graphite Iron (CGI) castings used in automotive and allied industries. Requirements in this document include: a. Tensile Strength b. Yield Strength c. Elongation d. Graphite Morphology Appendix A provides general information on application of this material along with additional data on mechanical and physical properties not specified but useful as a design reference. Appendix B provides a Compacted Graphite Iron Percent Nodularity Rating Chart not specified but useful as a visual reference.
HISTORICAL
1975-01-01
Standard
J158A_197501
This standard covers the hardness and microstructural requirements for malleable iron castings - ferritic, pearlitic, tempered pearlitic, and tempered martensitic grades used in automotive and allied industries. Castings shall be heat treated to meet this SAE Standard. The Appendix provides general information on the application of malleable iron castings and their chemical composition to meet hardness, microstructure, and other properties needed for particular service conditions. The mechanical properties in the Appendix are provided for design purposes. The specific grades, hardness range, and final heat treatment are shown in Table 1.
HISTORICAL
1986-06-01
Standard
J158_198606
This standard covers the hardness and microstructural requirements for malleable iron castings - ferritic, pearlitic, tempered pearlitic, and tempered martensitic grades used in automotive and allied industries. Castings shall be heat treated to meet this SAE Standard. The Appendix provides general information on the application of malleable iron castings and their chemical composition to meet hardness, microstructure, and other properties needed for particular service conditions. The mechanical properties in the Appendix are provided for design purposes. The specific grades, hardness range, and final heat treatment are shown in Table 1.
HISTORICAL
2003-03-25
Standard
J2477_200303
This SAE Standard covers the mechanical and physical property requirements for Austempered Ductile Iron (ADI) castings used in automotive and allied industries. Specifically covered are: a. Hardness b. Tensile Strength c. Yield Strength d. Elongation e. Modulus of Elasticity f. Impact Energy g. Microstructure In this document SI units are primary and in-lb units are derived. Appendix A provides general information and related resources on the microstructural, chemical and heat treatment requirements to meet the mechanical properties needed for ADI in particular service conditions and applications.
HISTORICAL
2001-12-18
Standard
J2582_200112
This SAE Standard covers the hardness, chemical analysis and microstructural requirements for ductile iron castings intended for high temperature service in automotive and allied industries. Commonly known as SiMo ductile iron, typical applications are in piston-engine exhaust manifolds and turbocharger parts. Castings may be specified in the as-cast or heat treated condition. For design purposes, the Appendix provides general information on the application of high temperature ductile iron castings, their processing conditions, chemical composition, mechanical properties and microstructure.
HISTORICAL
2002-10-10
Standard
J435_200210
This SAE Standard defines the specifications for steel castings used in the automotive and allied industries.
HISTORICAL
1974-07-01
Standard
J435_197407
These specifications cover steel castings used in the automotive and allied industries.
HISTORICAL
1974-07-01
Standard
J435C_197407
This SAE Standard defines the specifications for steel castings used in the automotive and allied industries.
HISTORICAL
1992-10-01
Standard
J859_199210
This SAE Recommended Practice is intended to supply a uniform means of designating cast ferrous materials reported in SAE Standards and Recommended Practices. The system outlined in this report is intended to facilitate the addition of new, widely used casting materials and also the deletion of now obsolete grades
HISTORICAL
1986-06-01
Standard
J434_198606
This SAE Standard covers the minimum mechanical properties measured on separately cast test pieces of varying thickness and microstructural requirements for ductile iron castings used in automotive and allied industries. Castings may be specified int he as-cast or heat-treated condition. If castings are heat-treated, prior approval from the customer is required. The appendix provides general information on chemical composition, microstructure and casting mechanical properties, as well as other information for particular service conditions. In this standard SI units are primary and in-lb units are derived.
HISTORICAL
1964-10-01
Standard
J434A_196410
This SAE standard covers the minimum mechanical properties measured on separately cast test pieces of varying thickness and microstructural requirements for ductile iron castings used in automotive and allied industries. Castings may be specified in the as-cast or heat-treated condition. If castings are heattreated, prior approval from the customer is required. The appendix provides general information on chemical composition, microstructure and casting mechanical properties, as well as other information for particular service conditions. In this standard SI units are primary and in-lb units are derived.
HISTORICAL
1975-01-01
Standard
J434C_197501
This SAE standard covers the minimum mechanical properties measured on separately cast test pieces of varying thickness and microstructural requirements for ductile iron castings used in automotive and allied industries. Castings may be specified in the as-cast or heat-treated condition. If castings are heattreated, prior approval from the customer is required. The appendix provides general information on chemical composition, microstructure and casting mechanical properties, as well as other information for particular service conditions. In this standard SI units are primary and in-lb units are derived.
HISTORICAL
1979-08-01
Standard
J431_197908
This SAE Standard covers the hardness, tensile strength, and microstructure and special requirements of gray iron sand molded castings used in the automotive and allied industries. Specific requirements are provided for hardness of castings. Test bar tensile strength/Brinell hardness (t/h) ratio requirements are provided to establish a consistent tensile strength-hardness relationship for each grade to facilitate prediction and control of tensile strength in castings. Provision is made for specification of special additional requirements of gray iron automotive castings where needed for particular applications and service conditions. Note: This document was revised in 1993 to provide grade specific t/h control. In 1999 the document was revised to make SI metric units primary.
HISTORICAL
1975-01-01
Standard
J431C_197501
This SAE Standard covers the hardness, tensile strength, and microstructure and special requirements of gray iron sand molded castings used in the automotive and allied industries. Specific requirements are provided for hardness of castings. Test bar tensile strength/Brinell hardness (t/h) ratio requirements are provided to establish a consistent tensile strength-hardness relationship for each grade to facilitate prediction and control of tensile strength in castings. Provision is made for specification of special additional requirements of gray iron automotive castings where needed for particular applications and service conditions. Note: This document was revised in 1993 to provide grade specific t/h control. In 1999 the document was revised to make SI metric units primary.
HISTORICAL
1996-08-01
Standard
J431_199608
This SAE Standard covers the hardness, tensile strength, and microstructural requirements for gray iron sand mold castings used in automotive and allied industries. The chemical requirements for alloy gray iron automotive camshafts are included in the document under casting for special application with controlled composition and microstructure. Appendix A provides general information on application of gray iron in automotive castings and chemical composition to meet hardness, microstructural, and other properties needed for particular service conditions. Casting tensile strength estimates are provided in Appendix A for design reference.
HISTORICAL
1993-03-01
Standard
J431_199303
This SAE Standard covers the hardness, tensile strength, and microstructure and special requirements of gray iron sand molded castings used in the automotive and allied industries. Specific requirements are provided for hardness of castings. Test bar tensile strength/Brinell hardness (t/h) ratio requirements are provided to establish a consistent tensile strength-hardness relationship for each grade to facilitate prediction and control of tensile strength in castings. Provision is made for specification of special additional requirements of gray iron automotive castings where needed for particular applications and service conditions. Note: This document was revised in 1993 to provide grade specific t/h control. In 1999 the document was revised to make SI metric units primary.
Viewing 1 to 16 of 16

    Filter