Criteria

Text:
Display:

Results

Viewing 1 to 30 of 63
2016-09-27
WIP Standard
J1117
To provide a uniform procedure for measuring and reporting the pressure losses associated with the significant flow paths in a hydraulic fluid power valve. This procedure applies to hydraulic fluid power valves as applied to self-propelled work machines as referenced in SAE J1116.
HISTORICAL
1975-06-01
Standard
J1117_197506
To provide a uniform procedure for measuring and reporting the pressure losses associated with the significant flow paths in a hydraulic fluid power valve. This procedure applies to hydraulic fluid power valves as applied to self-propelled work machines as referenced in SAE J1116.
CURRENT
1986-03-01
Standard
J1117_198603
This procedure applies to hydraulic fluid power valves as applied to self-propelled work machines as referenced in SAE J1116.
HISTORICAL
1980-09-01
Standard
J1117_198009
To provide a uniform procedure for measuring and reporting the pressure losses associated with the significant flow paths in a hydraulic fluid power valve. This procedure applies to hydraulic fluid power valves as applied to self-propelled work machines as referenced in SAE J1116.
HISTORICAL
1998-03-01
Standard
J1614_199803
This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.35 to 19 mm₂ used on off-road, self-propelled earthmoving machines as defined in SAE J1116 and agricultural tractors as defined in ASAE S390.
HISTORICAL
1986-05-01
Standard
J1447_198605
This information report is intended to provide reference material for the selection and use of fire-resistant fluids in the hydraulic systems of off-road work machinery with separate hydraulic oil sump.
CURRENT
2014-08-05
Standard
J1447_201408
This information report is intended to provide reference material for the selection and use of fire-resistant fluids in the hydraulic systems of off-road work machinery with separate hydraulic oil sump.
HISTORICAL
1979-08-01
Standard
J1276_197908
Establish a uniform specification for reference usage in specific documents, such as fluid power component test procedures, where a fluid designation is required.
HISTORICAL
1990-07-30
Standard
J1277_199007
To establish a quality control procedure suitable for both users and producers by which the cleanliness level of new hydraulic fluid can be quantified, certified, and specified. The method is applicable to new mineral and synthetic hydraulic fluids--regardless of packaging. This sAE Standard is not intended as a procedure for operating equipment.
HISTORICAL
1982-05-01
Standard
J1277_198205
To provide a method by which to assess the cleanliness of new hydraulic fluids. The method is applicable to new mineral and synthetic hydraulic fluids - regardless of packaging. This SAE Standard is not intended as a procedure for operating equipment.
CURRENT
2014-01-22
Standard
J1276_201401
This Recommended Practice establishes a uniform fluid specification for reference usage in specific documents, such as fluid power component test procedures, where a fluid designation is required.
HISTORICAL
1986-03-01
Standard
J1276_198603
Establish a uniform specification for reference usage in specific documents, such as fluid power component test procedures, where a fluid designation is required.
CURRENT
2012-10-02
Standard
J1277_201210
To provide a method by which to assess the cleanliness of new hydraulic fluids. The method is applicable to new mineral and synthetic hydraulic fluids - regardless of packaging. This SAE Standard is not intended as a procedure for operating equipment.
HISTORICAL
2003-10-13
Standard
J1334_200310
Applies to hydraulic cylinders which are components of self-propelled work Machines defined in SAE J1116.
CURRENT
2015-09-25
Standard
J1334_201509
Applies to hydraulic cylinders which are components of Off-Road Work Machines defined in SAE J1116.
HISTORICAL
1990-04-01
Standard
J1335_199004
Applies to hydraulic cylinders, which are components of self-propelled work machines defined in SAE J1116.
HISTORICAL
1990-03-01
Standard
J1333_199003
The purpose of this recommended practice is to provide a laboratory method for determining the capacity of a hydraulic cylinder rod to resist corrosion, and the other cylinder components to withstand that corrosion.
CURRENT
2015-03-05
Standard
J1333_201503
SAE J1333 applies to hydraulic cylinders which are components of self-propelled work machines defined in SAE J1116.
CURRENT
2014-09-29
Standard
J1336_201409
Applies to hydraulic cylinders which are components of Off-Road Self-Propelled Work Machines defined in SAE J1116.
HISTORICAL
2009-04-09
Standard
J1335_200904
Applies to hydraulic cylinders, which are components of self-propelled work machines defined in SAE J1116.
CURRENT
2017-06-19
Standard
J1335_201706
Applies to hydraulic cylinders which are components of Off-Road Self-Propelled Work Machines defined in SAE J1116.
HISTORICAL
1987-06-01
Standard
J1336_198706
Applies to hydraulic cylinders which are components of self-propelled work machines defined in SAE J1116.
CURRENT
2015-09-25
Standard
J1235_201509
This procedure applies to directional control valves or other valves which in various positions direct or block fluid flow as applied to Off-Road Self-Propelled Work Machines as referenced in SAE J1116.
HISTORICAL
1978-06-01
Standard
J1235_197806
To provide a uniform laboratory procedure for measuring and reporting the fluid flow (leakage) across a restricted flow path in a hydraulic fluid power valve. This procedure applies to directional control valves or other valves which in various positions direct or block fluid flow as applied to self- propelled work machines as referenced in SAE J1116.
HISTORICAL
1986-03-01
Standard
J1235_198603
This procedure applies to directional control valves or other valves which in various positions direct or block fluid flow as applied to self-propelled work machines as referenced in SAE J1116.
CURRENT
2003-06-18
Standard
J214_200306
This test procedure describes tests for determining characteristics of hydraulic cylinders as used on construction and industrial mobile machinery as referenced in SAE J1116. In this code, metric equivalents are established according to SAE J916. These characteristics are to be recorded on data sheets similar to the ones shown herein. Two sets of data sheets are to be submitted for each cylinder, one set at 120 °F (49 °C) and one at 180 °F (82 °C).
HISTORICAL
1975-06-01
Standard
J931A_197506
This SAE Information Report is primarily to familiarize the designer of hydraulic powered machinery with the necessity for oil filtration in the hydraulic power circuit, the degree of system cleanliness required, types of filtration and filters available and their location and maintenance in the hydraulic circuit.
CURRENT
2012-08-20
Standard
J931_201208
This SAE Information Report is primarily to familiarize the designer of hydraulic powered machinery with the necessity for oil filtration in the hydraulic power circuit, the degree of system cleanliness required, types of filtration and filters available and their location and maintenance in the hydraulic circuit.
HISTORICAL
1986-03-01
Standard
J931_198603
This SAE Information Report is primarily to familiarize the designer of hydraulic powered machinery with the necessity for oil filtration in the hydraulic power circuit, the degree of system cleanliness required, types of filtration and filters available and their location and maintenance in the hydraulic circuit.
HISTORICAL
2008-05-20
Standard
J748_200805
This SAE Recommended Practice has been set up by Subcommittee 4 of the Off-Road Machinery Technical Committee and is primarily for directional control valves on construction and industrial machinery equipment as referenced in SAE J1116. The purpose is to establish port area to flow relationship and match valve spool eye ends in relation to rated capacity. Port connections are optional for either the 4-bolt split flange connection or the internal straight thread 'O' ring connection.
Viewing 1 to 30 of 63