Criteria

Text:
Display:

Results

Viewing 1 to 30 of 43
CURRENT
1997-03-01
Standard
AIR1936A
This study addresses the adequacy of sockets, wrenches, and torque adapters conforming to AS954 to wrench 12 point fasteners with wrenching configurations conforming to AS870C. Reported wrenching problems with smaller sizes are investigated through examining the combined tolerances on the fasteners and wrenches, conducting torque testing on typical high strength lock nuts. Possible solutions to correct these wrenching problems are presented.
HISTORICAL
1985-03-01
Standard
AIR1936
This study addresses the adequacy of sockets, wrenches, and torque adapters conforming to AS954 to wrench 12 point fasteners with wrenching configurations conforming to AS870C. Reported wrenching problems with smaller sizes are investigated through examining the combined tolerances on the fasteners and wrenches, conducting torque testing on typical high strength lock nuts. Possible solutions to correct these wrenching problems are presented.
CURRENT
2003-05-15
Standard
AIR1268
This report covers torque indicating and limiting devices, also referred to as torque wrenches or torque handles, accessories used to obtain predetermined torque values on nuts, bolts, plumbing, related fasteners and friction of rotating parts, etc; calibration equipment and recommended schedules; proper use of tools and chronic torque problems.
HISTORICAL
1997-03-01
Standard
ARP5130
This SAE Aerospace Recommended Practice (ARP) covers the requirements for alternative coatings used in lieu of nickel-chromium plating and the surface finish requirements for aerospace hand tools. It is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances.
CURRENT
2009-02-03
Standard
ARP5130A
This SAE Aerospace Recommended Practice (ARP) covers the requirements for alternative coatings used in lieu of nickel-chromium plating and the surface finish requirements for aerospace hand tools. It is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances.
HISTORICAL
1969-05-01
Standard
ARP1135
This recommended practice covers the dimensions of an inside splined driver-wrench adapter, envelope of the housing-wrench reaction, the mechanical method of adapting the driver-wrench adapter to the wrench adapter driven end, and the housing-wrench reaction to the holder-counter torque.
HISTORICAL
1980-08-01
Standard
AS954A
This SAE Aerospace Standard (AS) covers high strength thin wall (commercial) sockets, universal sockets, box wrenches and torque adaptors which possess the strength, clearances, and internal wrenching design so configured that, when mated with 12-point fasteners conforming to the requirement of AS870, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener's wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. The dimensional limits of box and combination wrench lengths have been established to provide configuration control for tool storage applications.
2015-08-05
WIP Standard
AS954H
This SAE Aerospace Standard (AS) covers high strength thin wall (commercial) sockets, universal sockets, box wrenches and torque adaptors which possess the strength, clearances, and internal wrenching design so configured that, when mated with 12-point fasteners conforming to the requirement of AS870, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener's wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. The dimensional limits of box and combination wrench lengths have been established to provide configuration control for tool storage applications.
HISTORICAL
2011-08-08
Standard
AS954F
This SAE Aerospace Standard (AS) covers high strength thin wall (commercial) sockets, universal sockets, box wrenches and torque adaptors which possess the strength, clearances, and internal wrenching design so configured that, when mated with 12-point fasteners conforming to the requirement of AS870, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener's wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. The dimensional limits of box and combination wrench lengths have been established to provide configuration control for tool storage applications.
CURRENT
2011-12-09
Standard
AS954G
This SAE Aerospace Standard (AS) covers high strength thin wall (commercial) sockets, universal sockets, box wrenches and torque adaptors which possess the strength, clearances, and internal wrenching design so configured that, when mated with 12-point fasteners conforming to the requirement of AS870, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener's wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. The dimensional limits of box and combination wrench lengths have been established to provide configuration control for tool storage applications.
HISTORICAL
1985-11-01
Standard
AS954C
This SAE Aerospace Standard (AS) covers high strength thin wall (commercial) sockets, universal sockets, box wrenches and torque adaptors which possess the strength, clearances, and internal wrenching design so configured that, when mated with 12-point fasteners conforming to the requirement of AS870, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener's wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. The dimensional limits of box and combination wrench lengths have been established to provide configuration control for tool storage applications.
HISTORICAL
1985-03-01
Standard
AS954B
This SAE Aerospace Standard (AS) covers high strength thin wall (commercial) sockets, universal sockets, box wrenches and torque adaptors which possess the strength, clearances, and internal wrenching design so configured that, when mated with 12-point fasteners conforming to the requirement of AS870, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener's wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. The dimensional limits of box and combination wrench lengths have been established to provide configuration control for tool storage applications.
HISTORICAL
1994-01-01
Standard
AS954E
This SAE Aerospace Standard (AS) covers high strength thin wall commercial sockets, universal sockets, box wrenches and torque adaptors which possess the strength, clearances, and internal wrenching design so configured that, when mated with 12-point fasteners conforming to the requirement of AS870, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener's wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
HISTORICAL
1988-02-01
Standard
AS954D
This SAE Aerospace Standard (AS) covers high strength thin wall (commercial) sockets, universal sockets, box wrenches and torque adaptors which possess the strength, clearances, and internal wrenching design so configured that, when mated with 12-point fasteners conforming to the requirement of AS870, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener's wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. The dimensional limits of box and combination wrench lengths have been established to provide configuration control for tool storage applications.
2014-10-06
WIP Standard
AS955A
This SAE Aerospace Standard (AS) covers high strength thin wall (commercial) metric sockets, universal metric sockets, metric box wrenches and metric torque adaptors which possess the strength, clearances, and internal wrenching design so configured that, when mated with 12 point fasteners conforming to the requirement of ISO 4095, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener's wrenching points. This standard provides additional requirements beyond ASME B107.100 and B107.5M appropriate for aerospace use. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. The dimensional limits of box and combination wrench lengths have been established to provide configuration control for tool storage applications.
CURRENT
2012-07-24
Standard
AS955
This SAE Aerospace Standard (AS) covers high strength thin wall (commercial) metric sockets, universal metric sockets, metric box wrenches and metric torque adaptors which possess the strength, clearances, and internal wrenching design so configured that, when mated with 12 point fasteners conforming to the requirement of ISO 4095, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener’s wrenching points. This standard provides additional requirements beyond ASME B107.100 and B107.5M appropriate for aerospace use. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. The dimensional limits of box and combination wrench lengths have been established to provide configuration control for tool storage applications.
CURRENT
2013-05-28
Standard
AS6018
This SAE Aerospace Standard (AS) covers adjustable and non-adjustable spanner wrenches generally used for aerospace machinery maintenance and for tightening and loosening hose couplings and hydrant caps. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
2012-01-19
WIP Standard
AS6405
This specification covers high strength ratcheting wrenches used for attachment and detachment of high strength and high temperature aircraft fasteners.
CURRENT
2013-03-15
Standard
AS85188A
This specification covers pneumatic-hydraulic tools for use in the installation of type I blind rivets conforming to MIL-R-7885 (see 6.1).
HISTORICAL
2002-03-29
Standard
AS85188
This specification covers pneumatic-hydraulic tools for use in the installation of type I blind rivets conforming to MIL-R-7885 (see 6.1).
HISTORICAL
2011-02-21
Standard
AS28431
This Society of Automotive Engineers (SAE) Aerospace Standard covers requirements for micrometer adjustable, feel impulse, torque wrenches. The torque wrench is used to apply a pre-set torque to threaded fasteners and other torque requirements.
CURRENT
2011-02-21
Standard
AS28431A
This SAE International Aerospace Standard covers requirements for micrometer adjustable, feel impulse, torque wrenches. The torque wrench is used to apply a pre-set torque to threaded fasteners and other torque requirements.
2015-08-05
WIP Standard
AS28431B
This SAE International Aerospace Standard covers requirements for micrometer adjustable, feel impulse, torque wrenches. The torque wrench is used to apply a pre-set torque to threaded fasteners and other torque requirements.
HISTORICAL
1993-03-01
Standard
AS4167A
This SAE Aerospace Standard (AS) covers 12-point open box end crowfoot, flare nut, double open box end, combination box and open box end, and ratcheting open box end wrenches that are designed with the following requirements: Nondistorting usage Possessing the strength, clearances, and internal wrenching design to be used on hydraulic tube fittings that conform to the requirements of SAE J514. Transmitting torque to tube fittings without bearing on the apex of fitting wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
HISTORICAL
2011-04-26
Standard
AS4167B
This SAE Aerospace Standard (AS) covers 12 point flare nut crowfoot, flare nut wrenches, double end flare nut wrenches, combination box and flare nut wrenches, and ratcheting flare nut wrenches that are designed with the following requirements: a. Non-distorting usage b. Possessing the strength, clearances, and internal wrenching design to be used on hydraulic tube fittings that conform to the requirements of SAE J514. c. Transmitting torque to tube fittings without bearing on the apex of fitting wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
HISTORICAL
2011-12-12
Standard
AS4283B
This SAE International Standard covers handles and attachments for use with sockets and crowfoot wrenches in aerospace applications involving high torque, limited clearances, and generally clean conditions. This document provides additional requirements beyond ASME B107.10 appropriate for aerospace use. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
HISTORICAL
1991-08-01
Standard
AS4283
This SAE Aerospace Standard (AS) covers handles and attachments for use with sockets and crowfoot wrenches in aerospace applications involving high torque, limited clearances, and generally clean conditions. This document provides additional requirements beyond ANSI B107.10M appropriate for aerospace use. The use of adapters, either enlarging or reducing, for turning high-strength fasteners is an unsafe practice. Adapters are not included in this document. The listing of tools in this document does not insure that they are available commercially.
HISTORICAL
1994-05-01
Standard
AS4283A
This SAE Aerospace Standard (AS) covers handles and attachments for use with sockets and crowfoot wrenches in aerospace applications involving high torque, limited clearances, and generally clean conditions. This document provides additional requirements beyond ANSI B107.10M appropriate for aerospace use. The use of adapters, either enlarging or reducing, for turning high-strength fasteners is an unsafe practice. Adapters are not included in this document. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Viewing 1 to 30 of 43