Criteria

Text:
Topic:
Display:

Results

Viewing 1 to 30 of 149
HISTORICAL
1974-12-01
Standard
AMS3380B
This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible hose reinforced with wire braid.
HISTORICAL
1983-07-01
Standard
AMS3380C
This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible hose reinforced with wire braid.
CURRENT
1991-04-01
Standard
AMS3380D
This specification covers a polytetrafluoroethylene resin in the form of extruded and sintered flexible tube reinforced with wire braid.
HISTORICAL
1960-01-01
Standard
AMS3380
This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible tube reinforced with wire braid. Primarily for fluid lines operating in service up to 230 degrees C (446 degrees F) and under pressures up to 1500 psi (10,342 kPa).
HISTORICAL
1965-09-01
Standard
AMS3380A
This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible tube reinforced with wire braid. Primarily for fluid lines operating in service up to 230 degrees C (446 degrees F) and under pressures up to 1500 psi (10,342 kPa).
CURRENT
1993-10-01
Standard
AMS3389D
This specification covers a synthetic rubber in the form of a nonrigid, smooth bore, noncollapsing-type hose.
HISTORICAL
1991-10-01
Standard
AMS3388C
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose.
HISTORICAL
1961-07-01
Standard
AMS3389A
This specification covers a synthetic rubber in the form of a nonrigid, smooth bore, noncollapsing-type hose. This hose has been used typically for fueling aircraft, but usage is not limited to such applications. This hose is not intended for flexible connection between tractor and trailer, to be collapsed for drainage, or for operating pressures higher than 250 psi (1724 kPa).
HISTORICAL
1961-07-01
Standard
AMS3388A
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose. This hose has been used typically for fueling aircraft, but usage is not limited to such applications. This hose is not intended for flexible connection between tractor and trailer, to be collapsed for drainage, or for operating pressures higher than 185 psi (1276 kPa).
HISTORICAL
1991-10-01
Standard
AMS3389C
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose.
HISTORICAL
1958-08-01
Standard
AMS3389
This specification covers a synthetic rubber in the form of a nonrigid, smooth bore, noncollapsing-type hose. This hose has been used typically for fueling aircraft, but usage is not limited to such applications. This hose is not intended for flexible connection between tractor and trailer, to be collapsed for drainage, or for operating pressures higher than 250 psi (1724 kPa).
CURRENT
1993-10-01
Standard
AMS3388D
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose.
HISTORICAL
1958-08-01
Standard
AMS3386
This specification covers a synthetic rubber in the form of soft wall, smooth bore, collapsing-type hose. This hose has been used typically for fueling aircraft from tank trucks or pits where the hose will be rolled flat for stowage on a reel, but usage is not limited to such applications. Not recommended for operating pressures higher than 125 psi (862 kPa).
CURRENT
1993-10-01
Standard
AMS3387E
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing hose with textile reinforcement.
HISTORICAL
1958-08-01
Standard
AMS3388
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose. This hose has been used typically for fueling aircraft, but usage is not limited to such applications. This hose is not intended for flexible connection between tractor and trailer, to be collapsed for drainage, or for operating pressures higher than 185 psi (1276 kPa).
HISTORICAL
1991-10-01
Standard
AMS3386C
This specification covers a synthetic rubber in the form of a soft wall, smooth bore, collapsing type hose.
CURRENT
1993-10-01
Standard
AMS3386D
This specification covers a synthetic rubber in the form of a soft wall, smooth bore, collapsing-type hose.
HISTORICAL
1961-07-01
Standard
AMS3386A
This specification covers a synthetic rubber in the form of soft wall, smooth bore, collapsing-type hose. This hose has been used typically for fueling aircraft from tank trucks or pits where the hose will be rolled flat for stowage on a reel, but usage is not limited to such applications. Not recommended for operating pressures higher than 125 psi (862 kPa).
HISTORICAL
1970-02-01
Standard
ARP1153
This specification describes a method for determining the specific gravity of tubing, fabricated from polytetrafluoroethylene, after a controlled heating and cooling cycle. The specific gravity obtained by this method is a measure of relative molecular weight of the resin. The measure, termed Relative Specific Gravity (RSG), increases with decreasing molecular weight (see 2.3).
CURRENT
1991-06-01
Standard
ARP1153A
This document describes a method for determining the specific gravity of tubing, fabricated from polytetrafluoroethylene, after a controlled heating and cooling cycle. The specific gravity obtained by this method is a measure of relative molecular weight of the resin. The measure, termed relative specific gravity (RSG), increases with decreasing molecular weight (see 2.3).
HISTORICAL
1980-04-01
Standard
ARP1643
This document describes the materials, equipment, and processing techniques used in fabricating high-strength or high-modulus graphite-fiber-reinforced polysulfone laminates for structural applications for service up to 120°C (250°F).
CURRENT
2015-04-28
Standard
ARP1536B
This SAE Aerospace Recommended Practice (ARP) establishes a method of testing, and criteria for comparative evaluation of the abrasion resistance of chafe guard, and also establishes standard test equipment to be used in conducting these tests.
CURRENT
2004-11-24
Standard
AIR5693
The scope of this document is limited to the compatibility of typical fluids that may come in contact with PTFE hose assemblies. PTFE hose assemblies may be braided with CRES wire, polyester or para-aramid fibers. Hose assemblies may be equipped with aluminum, CRES, titanium or nickel alloy fittings; and with fire resistant cover materials. All of these constituent materials of PTFE hose assemblies must be compatible with all of the fluids found in any particular application.
CURRENT
1996-10-01
Standard
AIR4092A
To provide information regarding a unique failure mode and alternate solutions for consideration by application designers.
Viewing 1 to 30 of 149

Filter

  • Range:
    to:
  • Year: