Search Results

This SAE Technical Report provides test procedures, requirements, and guidelines for turn signal lamps intended for use on vehicles 2032 mm or more in overall width. Turn signal lamps conforming to this report may also be used on vehicles less than 2032 mm in overall width except on passenger cars.

This SAE Technical Report provides test procedures, requirements, and guidelines for turn signal lamps intended for use on vehicles 2032 mm or more in overall width. Front and rear turn signal lamps conforming to the requirements of this document may also be used on vehicles less than 2032 mm in overall width.

This SAE Standard provides test procedures, requirements, and guidelines for stop lamps intended for use on vehicles 2032 mm or more in overall width. Stop lamps conforming to the requirements of this document may be used on vehicles less than 2032 mm in overall width.

This SAE Standard provides test procedures, requirements, and guidelines for stop lamps intended for use on vehicles 2032 mm or more in overall width. Stop lamps conforming to the requirements of this document may be used on vehicles less than 2032 mm in overall width.

This SAE Recommended Practice applies to the location, number, color, and functioning of lamps and retro-reflecting devices installed on road vehicles. It provides a common denominator for installation requirements of lighting and light signaling devices based on existing regulatory requirements and industry standards of North America, Europe, and Asia. This document does not replace regulatory requirements in effect at the time of application. It is subject to changes to reflect additional experience, technical advances, and especially changes in government and industry documents used as references. Users of this document are advised to verify current legal requirements, regarding the mandatory installation of additional lighting devices or installation restrictions for devices described herein, directly with the appropriate authorities in the territory where their products are intended to be registered.

This SAE Recommended Practice provides procedures, and information to conduct vibration (impact) tests on lighting devices and their components as well as other safety equipment used on vehicles.

This SAE Recommended Practice provides test procedures, requirements, and guidelines for high-mounted stop lamps and high-mounted turn signal lamps intended for use on vehicles 2032 mm or more in overall width. This document applies to trucks, motor coaches, van type trailers, and other vehicles with permanent structure greater than 2800 mm high. This document does not apply to school buses, truck tractors, pole trailers, flat-bed trailers, pick-up truck with dual wheels and trailer converter dollies. The purpose of the high-mounted stop lamp(s) and high-mounted turn signal lamp(s) is to provide a signal over intervening vehicles to the driver of following vehicles.

This SAE Information Report will provide a uniform arrangement with which to evaluate the concept of high-mounted lamps on large vehicles. The report provides test procedures, requirements, and guidelines for high-mounted stop lamps intended for use on certain vehicles 2032 mm (80 in) or more in overall width. This information report applies to trucks, motor coaches, closed and open top van trailers and other vehicles with permanent structures greater than 2.8 m high. They are not intended for use on school busses, truck tractors, flat bed, pole, and boat trailers and all other trailers or trucks/truck bodies whose permanent structures are less than 2.8 m (approximately 112 in) high. These lamps are for the purpose of providing a signal over intervening vehicles to following drivers. Additionally, four widely spaced lamps will make a more conspicuous stop lamp pattern, thus making it easier to identify a large vehicle as slowing or stopping when approaching it from the rear.

This SAE Recommended Practice provides test procedures, requirements, and guidelines for high-mounted stop lamps and high-mounted turn signal lamps intended for use on vehicles 2032 mm or more in overall width. This document applies to trucks, motor coaches, van type trailers, and other vehicles with permanent structure greater than 2800 mm high. This document does not apply to school buses, truck tractors, pole trailers, flat-bed trailers, pick-up truck with dual wheels and trailer converter dollies. The purpose of the high-mounted stop lamp(s) and high-mounted turn signal lamp(s) is to provide a signal over intervening vehicles to the driver of following vehicles.

This SAE Recommended Practice provides test procedures, requirements, and guidelines for high-mounted stop lamps and high-mounted turn signal lamps intended for use on vehicles 2032 mm or more in overall width. This document applies to trucks, motor coaches, van type trailers, and other vehicles with permanent structure greater than 2800 mm high. This document does not apply to school buses, truck tractors, pole trailers, flat-bed trailers, pick-up truck with dual wheels and trailer converter dollies. The purpose of the high-mounted stop lamp(s) and high-mounted turn signal lamp(s) is to provide a signal over intervening vehicles to the driver of following vehicles.

This SAE Recommended Practice provides test procedures, requirements, and guidelines for high-mounted stop lamps intended for use on vehicles 2032 mm or more in overall width. This document applies to trucks, motor coaches, van type trailers, and other vehicles with permanent structure greater than 2.8 m high. This document does not apply to school buses, truck tractors, pole trailers, flat-bed trailers, and trailer converter dollies. The purpose of the high-mounted stop lamp or lamps is to provide a signal over intervening vehicles to the driver of following vehicles.

This SAE Recommended Practice provides test procedures, requirements, and guidelines for high-mounted stop lamps intended for use on vehicles 2032 mm or more in overall width. This document applies to trucks, motor coaches, van type trailers, and other vehicles with permanent structure greater than 2.8 m high. This document does not apply to school buses, truck tractors, pole trailers, flat-bed trailers, and trailer converter dollies. The purpose of the high-mounted stop lamp or lamps is to provide a signal over intervening vehicles to the driver of following vehicles.

This SAE Recommended Practice provides test procedures, requirements, and guidelines for high-mounted stop lamps and high-mounted turn signal lamps intended for use on vehicles 2032 mm or more in overall width. This document applies to trucks, motor coaches, van type trailers, and other vehicles with permanent structure greater than 2800 mm high. This document does not apply to school buses, truck tractors, pole trailers, flat-bed trailers, pick-up truck with dual wheels and trailer converter dollies. The purpose of the high-mounted stop lamp(s) and high-mounted turn signal lamp(s) is to provide a signal over intervening vehicles to the driver of following vehicles.

Canadian and UN documents listed. Entire document copyedited for grammar, clarity, and up-to-date language. Added Figure 3 for white photometric requirements. Title adjusted. § 2.2: Added SAE J2040 & J2261. Added UN publications. Updated title and their respective availability of FMCSA publication. Added Canadian publications. Added TTMA publication. § 3: Separated light function definitions from lamp/device definitions in accordance with recent practice in other SAE Standards. Added "end-outline marker lamp" designation as an alternative term for clearance lamp.

This SAE Standard provides test procedures, requirements, and guidelines for clearance, sidemarker, and identification lamps intended for use on vehicles 2032 mm or more in overall width. A clearance lamp, a sidemarker lamp, or an identification lamp conforming to the requirements of this document may be used on vehicles less than 2032 mm in overall width.

This SAE Standard provides test procedures, requirements, and guidelines for clearance, sidemarker, and identification lamps intended for use on vehicles 2032 mm or more in overall width. A clearance lamp, sidemarker lamps, or an identification lamp conforming to the requirements of this document may be used on vehicles less than 2032 mm in overall width.

This SAE Standard provides test procedures, requirements, and guidelines for clearance, sidemarker, and identification lamps intended for use on vehicles 2032 mm or more in overall width. A clearance lamp, sidemarker lamps, or an identification lamp conforming to the requirements of this document may be used on vehicles less than 2032 mm in overall width.

This SAE Standard provides test procedures, requirements, and guidelines for clearance, sidemarker, and identification lamps intended for use on vehicles 2032 mm or more in overall width. A clearance lamp, sidemarker lamp, or an identification lamp conforming to the requirements of this document may be used on vehicles less than 2032 mm in overall width.

This SAE Standard provides test procedures, requirements, and guidelines for clearance, sidemarker, and identification lamps intended for use on vehicles 2032 mm or more in overall width. A clearance lamp, sidemarker lamp, or an identification lamp conforming to the requirements of this document may be used on vehicles less than 2032 mm in overall width.