Criteria

Text:
Display:

Results

Viewing 1 to 30 of 36
CURRENT
2015-07-15
Standard
J182_201507
This SAE Recommended Practice describes a procedure for locating the three-dimensional reference system on a motor vehicle as built.
CURRENT
2017-10-11
Standard
J1052_201710
This SAE Standard describes head position contours and procedures for locating the contours in a vehicle. Head position contours are useful in establishing accommodation requirements for head space and are required for several measures defined in SAE J1100. Separate contours are defined depending on occupant seat location and the desired percentage (95 and 99) of occupant accommodation. This document is primarily focused on application to Class A vehicles (see SAE J1100), which include most personal-use vehicles (passenger cars, sport utility vehicles, pick-up trucks). A procedure for use in Class B vehicles can be found in Appendix B.
2012-08-15
WIP Standard
J3017
This recommended practice applies to any vehicle manufacturer that chooses to publish vehicle dimensions and specifications that may influence customer purchase decisions. The intent is to define standardized vehicle dimensions that reflect showroom conditions and / or dimensions experienced during purchase conditions and also include published dimensions used in marketing / advertising materials irrespective of communications media that influence purchase decisions This document also provides a method to certify OEM and 3rd party compliance with recommended SAE and ISO measurement practices for vehicle dimensions commonly reported publically for marketing and competitive vehicle analysis
CURRENT
2008-06-23
Standard
J2732_200806
This document provides dimension definitions that facilitate geometric quantification and evaluation of seats. Dimensions described in this document have been designed to be measured in a CAD environment; however, many dimensions require the HPM position and attitude. This can be obtained by physically establishing H-point using benchmark or auditing procedures OR by measuring the HPD within a CAD or modelling system. Refer to the appropriate document for these procedures. These dimensions are package independent in that they do not require use of the HPM-II supplemental thigh/leg/shoe. Three types of seat geometry reference points and measurements have been developed: Simple reference points and measurements not related to H-point. H-point dependent reference points and measurements that utilize the seat characterization capabilities of the HPM to quantify seat measurements. Cross sectional seat trim outlines.
2014-06-27
WIP Standard
J2732
This document provides dimension definitions that facilitate geometric quantification and evaluation of seats. This document has been designed for use in CAD, however, many dimensions require establishing HPM position and attitude. Refer to the appropriate document for these procedures. These dimensions are package independent in that they do not require use of the HPM-ll supplemental thigh/leg/shoe. Three types of seat geometry reference points and measurements have been developed. 1. Simple reference points and measurements not related to H-point 2. H-point dependent reference points and measurement that utilize the seat characterization capabilities of the HPM to quantify seat measurements 3. Cross sectional seat trim outlines For convenience and simplicity, many terms associated with H-point devices use human body parts in their name.
2010-06-03
WIP Standard
J2897
This document provides technology, terminology, and procedural definitions common in Motor Vehicle seat design and testing.
CURRENT
2012-01-06
Standard
J2896_201201
These test procedures apply to complete seat systems (production seats or prototypes built at the intended manufacturing quality); however, the procedures can be modified for subsystem or component level testing.
HISTORICAL
1980-02-01
Standard
J782_198002
This recommended practice is a source of information for body and trim engineers and represents existing technology in the field of on-highway vehicle seating systems. It provides a more uniform system of nomenclature, definitions of functional requirements, and testing methods of various material components of motor vehicle seating systems.
HISTORICAL
1970-01-01
Standard
J782A_197001
This recommended practice is a source of information for body and trim engineers and represents existing technology in the field of on-highway vehicle seating systems. It provides a more uniform system of nomenclature, definitions of functional requirements, and testing methods of various material components of motor vehicle seating systems.
2016-10-25
WIP Standard
J826/1
This document describes the CAD model data available from SAE for the HPM-1 three-dimensional H-point machine. The elements of the CAD model include the outer surfaces of the cushion and back pans, datum points and lines, and calibration references. The intended purpose for this information is to provide a CAD reference for design and benchmarking as well as a calibration reference for the physical HPM-1 audits. The content and format of the data files that are available are also described. The actual CAD model files are included with this product and are provided in the following formats: CATIA v4 (without parametrics), CATIA v5 (without parametrics), IGES, and STEP.
2014-10-16
WIP Standard
J826/3
This document describes the CAD model data of legs and back hardware available from SAE for the HPM-1 three-dimensional H-point machine. The elements of the CAD model include the feet, lower and thighs as well as headroom probe and t-bar. Also included are datum points and lines, and calibration references. The intended purpose for this information is to provide a CAD reference for design and benchmarking as well as a calibration reference for the physical HPM-1 audits. The content and format of the data files that are available are also described. The actual CAD model files are included with this product and are provided in the following formats: CATIA v4 (without parametrics), CATIA v5 (without parametrics), IGES, and STEP.
CURRENT
2011-06-09
Standard
J826/1_201106
This document describes the CAD model data available from SAE for the HPM-1 three-dimensional H-point machine. The elements of the CAD model include the outer surfaces of the cushion and back pans, datum points and lines, and calibration references. The intended purpose for this information is to provide a CAD reference for design and benchmarking as well as a calibration reference for the physical HPM-1 audits. The content and format of the data files that are available are also described. The actual CAD model files are included with this product and are provided in the following formats: CATIA v4 (without parametrics), CATIA v5 (without parametrics), IGES, and STEP.
CURRENT
2016-10-13
Standard
J826/2_201610
This document describes the 2-D computer-aided design (CAD) template for the HPM-1 H-point machine or HPD available from SAE. The elements of the HPD include the curve shapes, datum points and lines, and calibration references. The intended purpose for this information is to provide a master CAD reference for design and benchmarking. The content and format of the data files that are available are also described. The actual CAD model files are included with this product and are provided in the following formats: CATIA v5 (without parametrics), IGES, and STEP.
2015-06-16
WIP Standard
J3103
The test procedure included in this document are used to determine a benchmark SgRP for Class A vehicles where design intent information is unknown.
2015-05-05
WIP Standard
J3099
Presents the seating accommodation model used to determine seat track length for accommodation in design.
CURRENT
2009-08-26
Standard
J689_200908
This SAE Recommended Practice applies to rigid bumper or rigid structure points and flexible components of passenger cars, multipurpose passenger vehicles, and light trucks. This document is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances.
HISTORICAL
1996-06-01
Standard
J689_199606
This SAE Recommended Practice applies to rigid bumper or rigid structure points and flexible components of passenger cars, multipurpose passenger vehicles, and ligh trucks. This document is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. The purpose of this document is to provide minimum static design guidelines for curbstone clearnace, approach, departure, and ramp breakover angles. This is to minimize damage, if any, in normal vehicle use conditions. This document also encompasses all current worldwide regulations and requirements.
HISTORICAL
1989-12-01
Standard
J689_198912
This SAE Recommended Practice applies to rigid bumper or rigid structure points and flexible components of passenger cars, multipurpose passenger vehicles, and ligh trucks. This document is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. The purpose of this document is to provide minimum static design guidelines for curbstone clearnace, approach, departure, and ramp breakover angles. This is to minimize damage, if any, in normal vehicle use conditions. This document also encompasses all current worldwide regulations and requirements.
CURRENT
2010-01-19
Standard
J4002_201001
This Standard provides the specifications and procedures for using the H-point machine (HPM1) to audit vehicle seating positions. The HPM is a physical tool used to establish key reference points and measurements in a vehicle (see Figure 1 and Appendix A). The H-point design tool (HPD) is a simplified CAD2 version of the HPM, which can be used in conjunction with the HPM to take the optional measurements specified in this document, or used independently during product design (see Appendix D). These H-point devices provide a method for reliable layout and measurement of occupant seating compartments and/or seats. This document specifies the procedures for installing the H-point machine (HPM) and using the HPM to audit (verify) key reference points and measurements in a vehicle. The devices are intended for application at designated seating positions. They are not to be construed as tools that measure or indicate occupant capabilities or comfort.
HISTORICAL
2005-08-11
Standard
J4004_200508
This SAE Recommended Practice describes how to position and posture the H-point design tool (HPD) described in Appendix B, and how to establish the seating reference point (SgRP), design H-point travel path, and other key reference points that are used in the design and specification of both driver and passenger seat positions. This practice also provides a method for determining the length of the seat track for a driver seat that adjusts fore/aft. The seat track length is based on a desired level of driver accommodation, assuming a U.S. population containing an equal number of male and female drivers. The procedure can be used to establish driver seat track accommodation for new vehicle designs or to evaluate accommodation in existing vehicles. A general method for determining driver seat track length for any driver population (male and female stature distribution) at any selected accommodation percentile and gender mix is given in Appendix A.
CURRENT
2008-10-21
Standard
J4003_200810
Benchmarking is used to discover the design intent measurements for seating compartments in vehicles when these measurements are either unknown or are specified using differing measurement procedures. This document provides the specifications and procedures to establish consistent measurements for benchmarking vehicle seating positions using the H-Point Machine (HPM-II1) described in SAE J4002 and the H-Point Design tool (HPD) described in SAE J4004. The HPM-II is a physical tool used to establish key reference points and measurements in a vehicle (Figure 1). The HPD is a CAD tool that aids in the benchmarking process (see Appendix A and SAE J4004).
HISTORICAL
2005-08-15
Standard
J4003_200508
Benchmarking is used to discover the design intent measurements for seating compartments in vehicles when these measurements are either unknown or are specified using differing measurement procedures. This document provides the specifications and procedures to establish consistent measurements for benchmarking vehicle seating positions using the H-Point Machine (HPM-II ) and H-Point Design tool (HPD) described in SAE J4002. The HPM-II is a physical tool used to establish key reference points and measurements in a vehicle (Figure 1). The HPD is a CAD tool that aids in the benchmarking process (see Annex A and SAE J4004).
HISTORICAL
2004-02-16
Standard
J4002_200402
The devices described in this document provide a method for a reliable layout and measurement of occupant seating compartments and/or seats. They are not to be construed as tools that measure or indicate occupant capabilities or comfort. The devices are intended for applications at designated seating positions. They are not intended for use in defining or assessing temporary seating, such as folding jump seats. When using the H-Point Machine (HPM), interactions can occur between adjacent seating positions (i.e., having an HPM installed at the center occupant position can change the results obtained for the outboard occupant position). Therefore, only one machine should be installed in a particular row of seats during each test.
2014-06-30
WIP Standard
J4004
This SAE Recommended Practice describes how to position and posture the H-point design tool (HPD) described in Appendix B, and how to establish the seating reference point (SgRP), design H-point travel path, and other key reference points that are used in the design and specification of both driver and passenger seat positions. This practice also provides a method for determining the length of the seat track for a driver seat that adjusts fore/aft. The seat track length is based on a desired level of driver accommodation, assuming a U.S. population containing an equal number of male and female drivers. The procedure can be used to establish driver seat track accommodation for new vehicle designs or to evaluate accommodation in existing vehicles. A general method for determining driver seat track length for any driver population (male and female stature distribution) at any selected accommodation percentile and gender mix is given in Appendix A.
HISTORICAL
2005-08-11
Standard
J4002_200508
This Standard provides the specifications and procedures for using the H-point machine (HPM ) to audit vehicle seating positions. The HPM is a physical tool used to establish key reference points and measurements in a vehicle (see Figure 1 and Appendix A). The H-point design tool (HPD) is a simplified CAD version of the HPM, which can be used in conjunction with the HPM to take the optional measurements specified in this document, or used independently during product design (see Appendix D). These H-point devices provide a method for reliable layout and measurement of occupant seating compartments and/or seats. This document specifies the procedures for using the H-point machine (HPM) to audit (verify) key reference points and measurements in a vehicle. The devices are intended for application at designated seating positions. They are not to be construed as tools that measure or indicate occupant capabilities or comfort.
CURRENT
2008-08-29
Standard
J4004_200808
This SAE Recommended Practice describes how to position and posture the H-point design tool (HPD) described in Appendix B, and how to establish the seating reference point (SgRP), design H-point travel path, and other key reference points that are used in the design and specification of both driver and passenger seat positions. This practice also provides a method for determining the length of the seat track for a driver seat that adjusts fore/aft. The seat track length is based on a desired level of driver accommodation, assuming a U.S. population containing an equal number of male and female drivers. The procedure can be used to establish driver seat track accommodation for new vehicle designs or to evaluate accommodation in existing vehicles. A general method for determining driver seat track length for any driver population (male and female stature distribution) at any selected accommodation percentile and gender mix is given in Appendix A.
HISTORICAL
1973-09-01
Standard
J1100_197309
This SAE Recommended Practice defines a uniform set of interior and exterior dimensions for passenger cars, multipurpose passenger vehicles, and trucks.
HISTORICAL
1984-06-01
Standard
J1100_198406
This SAE Recommended Practice defines a set of measurements and standard procedures for motor vehicle dimensions. The dimensions are primarily intended to measure the design intent of a vehicle within a design environment (i.e., CAD). All dimensions in this practice can be measured this way. In addition, some dimensions can be taken in an actual vehicle. If measurements are taken on physical properties, some differences in values should be expected. Also, care should be taken to not confuse design intent measurements with those taken on a physical property. It is intended that the dimensions and procedures described in this practice be generic in their application to both the HPM, described in SAE J826, and the HPM-II, described in SAE J4002. In some circumstances, the figures may only reflect one or the other.
HISTORICAL
1995-05-01
Standard
J1100_199505
This SAE Recommended Practice defines a set of measurements and standard procedures for motor vehicle dimensions. The dimensions are primarily intended to measure the design intent of a vehicle within a design environment (i.e., CAD). All dimensions in this practice can be measured this way. In addition, some dimensions can be taken in an actual vehicle. If measurements are taken on physical properties, some differences in values should be expected. Also, care should be taken to not confuse design intent measurements with those taken on a physical property. It is intended that the dimensions and procedures described in this practice be generic in their application to both the HPM, described in SAE J826, and the HPM-II, described in SAE J4002. In some circumstances, the figures may only reflect one or the other.
HISTORICAL
2001-02-14
Standard
J1100_200102
This SAE Recommended Practice defines a uniform set of interior and exterior dimensions for passenger cars, multipurpose passenger vehicles, and trucks.
Viewing 1 to 30 of 36