Search Results

This SAE Standard applies to the following off-road work machines of mass greater than 700 kg that are commonly used in earthmoving, construction, logging, and mining applications as identified in SAE J1116 JUN86 and designed for an-board, seated operator: a Crawler tractors and loaders (see SAE J1057 SEP88 Sections 3.1 and 7.1 and SAE J727 JAN86 for description and nomenclature). b Graders (see SAE J1057 SEP88 Section 6 and SAE J870 JUL84 for description and nomenclature). c Wheel loaders, wheel tractors, and their modifications used for rolling or compacting, dozer equipped wheel tractors, wheel log skidders, skid steer loaders, and backhoe loaders (see SAE J1057 SEP88 Sections 3.2, 7.2, and 9 for description and nomenclature). d Wheel industrial tractors (see SAE J1092 JUN86 for description and nomenclature). e Tractor portion of semi-mounted scrapers, water wagons, articulated steer dumpers, bottom dump wagons, side dump wagons, rear dump wagons, and towed fifth wheel attachments (see SAE J1057 SEP88 Sections 4.1.1.4, 4.1.2, 4.2.1.1, 4.3.1.2, 4.3.1.3, 4.3.2, and 5 and SAE J869 JUL90 and SAE J728 JUL90 for description and nomenclature). f Rollers and compactors (see SAE J1017 JAN86 for description and nomenclature). g Rigid frame dumpers with full mounted bodies (see SAE J1057 SEP88 Sections 4.1.1.1, 4.1.1.2, 4.1.1.3, 4.1.1.5, and 4.3.1.1 and SAE J1016 JUL90 for description and nomenclature).

This standard applies to the following off-road work machines of mass greater than 700 kg that are commonly used in earthmoving, construction, logging, and mining applications as identified in SAE J1116 JUN86 and designed for an on-board, seated operator: (a) Crawler tractors and loaders (See SAE J1057 JUN81 Sections 3.1 and 7.1 and SAE J727 JAN86 for description and nomenclature.) (b) Graders (See SAE J1057 JUN81 Section 6 and SAE J870 JUL84 for description and nomenclature.) (c) Wheel loaders, wheel tractors and their modifications used for rolling or compacting, dozer equipped wheel tractors, wheel log skidders, skid steer loaders, and backhoe loaders (See SAE J1057 JUN81 Sections 3.2, 7.2 and 9 for description and nomenclature.) (d) Wheel industrial tractors (See SAE J1092 JUN86 for description and nomenclature.)

This standard applies to General Purpose Industrial Machines, as described in SAE J1116, which are equipped with Rollover Protective Structures (ROPS).

This standard applies to General Purpose Industrial Machines, as described in SAE J1116, which are equipped with Rollover Protective Structures (ROPS).

This SAE Standard applies to an overhead cover installed on a protective frame or enclosure conforming to SAE J2194 or alternately SAE J1194 and the following additional requirement of a drop test to verify the effectiveness of the overhead cover in protecting the operator from falling objects. The test procedures and performance requirements outlined in this document are based on currently available engineering data.

This Recommended Practice applies only to machines covered by SAE J1040c (ROPS). The evaluations are for resistance to localized penetration. The performance requirements, of a representative specimen within the manufacturer’s specifications, are based on the performance of experience proven structures under the laboratory evaluation procedure. It is intended that all portions of this Recommended Practice shall be reviewed and revised as additional knowledge of FOPS performance becomes available.

This SAE Recommended Practice applies only to excavators, as defined in SAE J/ISO 6165, working above ground, near an excavated or free standing bank or mine face which is higher than the top of the cab, or in demolition applications of free standing buildings or objects higher than the top of the cab.

The Deflection Limiting Volume (DLV) is shown in Fig. 1. It is an orthogonal approximation of a large operator in the normal seated position.

The Deflection Limiting Volume (DLV) is shown in Fig. 1. It is an orthogonal approximation of a large operator in the normal seated position.