Criteria

Text:
Display:

Results

Viewing 1 to 30 of 68
HISTORICAL
1989-10-01
Standard
J1590_198910
This SAE Standard establishes a classification of materials intended for the manufacture of piston rings based on mechanical properties and the stresses that these materials are capable of withstanding. This document applies to the manufacture of piston rings up to and including 200 mm diameter for reciprocating internal combustion engines. It also applies to piston rings for compressors working under similar conditions.
HISTORICAL
1998-04-01
Standard
J1589_199804
Differences, where they exist, are shown in Appendix A. This SAE Standard defines the measuring principles to be used for measuring piston rings. It applies to piston rings up to and including 200 mm diameter for reciprocating combustion engines. These inspection measuring principles may also be used for piston rings for compressors working under analogous conditions.
HISTORICAL
1990-01-01
Standard
J1589_199001
Differences, where they exist, are shown in Appendix A. This SAE Standard defines the measuring principles to be used for measuring piston rings. It applies to piston rings up to and including 200 mm diameter for reciprocating combustion engines. These inspection measuring principles may also be used for piston rings for compressors working under analogous conditions.
CURRENT
2008-06-30
Standard
J1589_200806
Differences, where they exist, are shown in Appendix A. This SAE Standard defines the measuring principles to be used for measuring piston rings. It applies to piston rings up to and including 200 mm diameter for reciprocating combustion engines. These inspection measuring principles may also be used for piston rings for compressors working under analogous conditions.
HISTORICAL
1992-10-01
Standard
J1588_199210
Differences, where they exist, are shown in Appendix A with associated rationale. This SAE Standard defines the most commonly used terms for piston rings. These terms designate either types of piston rings or certain characteristics and phenomena of piston rings. The terms and definitions apply to piston rings for reciprocating internal combustion engines and compressors working under analogous conditions. Appendix B is included which lists equivalent terms in English, French, Russian, German, Spanish, Portuguese, Italian, and Japanese.
HISTORICAL
1990-09-01
Standard
J1588_199009
Differences, where they exist, are shown in Appendix A with associated rationale. This SAE Standard defines the most commonly used terms for piston rings. These terms designate either types of piston rings or certain characteristics and phenomena of piston rings. The terms and definitions apply to piston rings for reciprocating internal combustion engines and compressors working under analogous conditions. Appendix B is included which lists equivalent terms in English, French, Russian, German, Spanish, Portuguese, Italian, and Japanese.
CURRENT
2008-06-30
Standard
J1588_200806
Differences, where they exist, are shown in Appendix A with associated rationale. This SAE Standard defines the most commonly used terms for piston rings. These terms designate either types of piston rings or certain characteristics and phenomena of piston rings. The terms and definitions apply to piston rings for reciprocating internal combustion engines and compressors working under analogous conditions. Appendix B is included which lists equivalent terms in English, French, Russian, German, Spanish, Portuguese, Italian, and Japanese.
HISTORICAL
1998-04-01
Standard
J1588_199804
Differences, where they exist, are shown in Appendix A with associated rationale. This SAE Standard defines the most commonly used terms for piston rings. These terms designate either types of piston rings or certain characteristics and phenomena of piston rings. The terms and definitions apply to piston rings for reciprocating internal combustion engines and compressors working under analogous conditions. Appendix B is included which lists equivalent terms in English, French, Russian, German, Spanish, Portuguese, Italian, and Japanese.
CURRENT
2008-06-30
Standard
J1590_200806
This SAE Standard establishes a classification of materials intended for the manufacture of piston rings based on mechanical properties and the stresses that these materials are capable of withstanding. This document applies to the manufacture of piston rings up to and including 200 mm diameter for reciprocating internal combustion engines. It also applies to piston rings for compressors working under similar conditions.
HISTORICAL
1990-09-01
Standard
J1591_199009
This SAE Standard specifies the general characteristics of piston rings and individual dimensional criteria, which are specified as appropriate in the documents in Section 2. This document also provides a system for coding, designation, and marking of piston rings. This document applies to the manufacture of piston rings up to and including 200 mm diameter for reciprocating internal combustion engines. It also applies to piston rings for compressors working under similar conditions.
HISTORICAL
1992-10-01
Standard
J1590_199210
This SAE Standard establishes a classification of materials intended for the manufacture of piston rings based on mechanical properties and the stresses that these materials are capable of withstanding. This document applies to the manufacture of piston rings up to and including 200 mm diameter for reciprocating internal combustion engines. It also applies to piston rings for compressors working under similar conditions.
HISTORICAL
1998-04-01
Standard
J1590_199804
This SAE Standard establishes a classification of materials intended for the manufacture of piston rings based on mechanical properties and the stresses that these materials are capable of withstanding. This document applies to the manufacture of piston rings up to and including 200 mm diameter for reciprocating internal combustion engines. It also applies to piston rings for compressors working under similar conditions.
CURRENT
2008-06-30
Standard
J1591_200806
This SAE Standard specifies the general characteristics of piston rings and individual dimensional criteria, which are specified as appropriate in the documents in Section 2. This document also provides a system for coding, designation, and marking of piston rings. This document applies to the manufacture of piston rings up to and including 200 mm diameter for reciprocating internal combustion engines. It also applies to piston rings for compressors working under similar conditions.
HISTORICAL
1998-04-01
Standard
J1591_199804
This SAE Standard specifies the general characteristics of piston rings and individual dimensional criteria, which are specified as appropriate in the documents in Section 2. This document also provides a system for coding, designation, and marking of piston rings. This document applies to the manufacture of piston rings up to and including 200 mm diameter for reciprocating internal combustion engines. It also applies to piston rings for compressors working under similar conditions.
HISTORICAL
1992-10-01
Standard
J1591_199210
This SAE Standard specifies the general characteristics of piston rings and individual dimensional criteria, which are specified as appropriate in the documents in Section 2. This document also provides a system for coding, designation, and marking of piston rings. This document applies to the manufacture of piston rings up to and including 200 mm diameter for reciprocating internal combustion engines. It also applies to piston rings for compressors working under similar conditions.
CURRENT
2008-06-30
Standard
J2226_200806
There is no standard equivalent to this SAE Standard. However, SAE J2226 is similar to and represents an extension of SAE J1998 (equivalent to ISO Standard 6622/2 TR). This SAE Standard specifies the essential dimensional features of Type B barrel faced steel rectangular piston rings. Only fully faced and inlaid coated rings are included, consistent with current U.S. practice. The requirements of this SAE Standard apply to steel piston rings of reciprocating internal combustion engines, up to and including 200 mm diameter and 4.5 mm width. Tolerances specified in this document represent a six sigma quality level.
HISTORICAL
1998-04-01
Standard
J2226_199804
There is no standard equivalent to this SAE Standard. However, SAE J2226 is similar to and represents an extension of SAE J1998 (equivalent to ISO Standard 6622/2 TR). This SAE Standard specifies the essential dimensional features of Type B barrel faced steel rectangular piston rings. Only fully faced and inlaid coated rings are included, consistent with current U.S. practice. The requirements of this SAE Standard apply to steel piston rings of reciprocating internal combustion engines, up to and including 200 mm diameter and 4.5 mm width. Tolerances specified in this document represent a six sigma quality level.
CURRENT
2010-01-19
Standard
J2275_201001
There is no ISO standard equivalent to this SAE Standard. This SAE standard identifies and defines the most commonly used terms for piston ring-groove characteristics, specifies dimensioning for groove widths, and demonstrates the methodology for calculation of piston groove root diameter. The requirements of this document apply to pistons and rings of reciprocating internal combustion engines and compressors working under analogous conditions, up to and including 200 mm diameter and 4.5 mm width for compression rings and 8.0 mm width for oil rings. The specifications in this document assume that components are measured at an ambient temperature of 20 °C (68 °F). Tolerances specified in this document represent practical functional limits and do not imply process capabilities.
HISTORICAL
1996-07-01
Standard
J2275_199607
There is no ISO standard equivalent to this SAE Standard. This SAE standard identifies and defines the most commonly used terms for piston ring-goove charactersitics, specifies dimensioning for groove widths, and demonstrates the methodology for calculation of piston groove root diameter. The requirements of this document apply to pistons and rings of reciprocating internal combustion engines and compressors working under analogous conditions, up to and including 200 mm diameter and 4.5 mm width for compression rings and 8.0 mm width for oil rings. The specifications in this document assume that components are measured at an ambient temperature of 20 °C (68 °F). Tolerances specified in this document represent practical functional limits and not imply process capabilities.
HISTORICAL
2007-04-16
Standard
J2275_200704
This SAE standard identifies and defines the most commonly used terms for piston ring-goove charactersitics, specifies dimensioning for groove widths, and demonstrates the methodology for calculation of piston groove root diameter. The requirements of this document apply to pistons and rings of reciprocating internal combustione ngines and compressors working under analogous conditions, up to and including 200 mm diameter and 4.5 mm width for compression rings and 8.0 mm width for oil rings. The specifications in this document assume that components are measured at an ambient temperature of 20 degrees C (68 degrees F). Tolerances specified in this document represent a six sigma quality level.
CURRENT
2010-05-20
Standard
J2612_201005
HISTORICAL
2002-01-23
Standard
J2612_200201
This SAE Standard defines the most commonly used terms for pistons. These terms designate either types of pistons or certain characteristics and phenomena of pistons. The terms and definitions apply to pistons for reciprocating internal combustion engines and compressors working under analogous conditions.
CURRENT
2014-08-05
Standard
J2798_201408
This document describes methodologies to determine the causes blow-by oil consumption caused by the power cylinder.
HISTORICAL
2007-02-07
Standard
J2797_200702
This document covers the mechnaisms associated with the power cylinder which might affect blow-by. It will not discuss in detail the blow-by mechanisms from other engine subsystems.
CURRENT
2007-02-07
Standard
J2796_200702
This document describes the major techniques for measuring oil consumption. It does not cover all the sub variations that might be used to make this measurement.
HISTORICAL
2007-04-23
Standard
J2798_200704
This document describes methodologies to determine the causes blow-by oil comsumption caused by the power cylinder.
CURRENT
2014-08-28
Standard
J2797_201408
This document covers the mechanisms associated with the power cylinder system which might affect blow-by. It will not discuss in detail the blow-by mechanisms from other systems or engine subsystems.
HISTORICAL
2007-04-17
Standard
J2795_200704
This document describes methodologies to determine the causes of high oil consumption caused by primarily the power cylinder system.
2012-11-28
WIP Standard
J2796
This document describes the major techniques for measuring oil consumption. it does not cover all sub variations that might be used to make this measurement.
CURRENT
2014-08-05
Standard
J2795_201408
This document describes methodologies to determine the causes of high oil consumption caused by primarily the power cylinder system.
Viewing 1 to 30 of 68