Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 1053
2016-01-06
Magazine
Time to get personal Industry engineers are combining apps, voice, the cloud, and other technologies such as artificial intelligence to enable drivers to customize their vehicles and anticipate their needs. Technology report GM and TARDEC co-developing fuel cell powered Chevrolet Colorado for military evaluation vehicles and anticipate their needs. Global vehicles Sports cars take center stage in Tokyo
2016-03-01
Magazine
A beast of its own kind The University of Michigan Solar Car Team falls a bit short in 2015 Bridgestone World Solar Challenge, but distinguishes itself nonetheless. Finding career inspiration via algorithm Participation in collegiate engineering competitions can reveal untapped talents and interests. Just ask Ohio State student Katherine Bovee. SAE 2016 World Congress preview Powering Possibilities is Toyota's goal at SAE 2016 World Congress.
2016-09-01
Magazine
Ruling the skies Warsaw University of Technology and Georgia Tech dominate SAE Aero Design competitions. European teams take top spots at FSAE Michigan, U.S. teams at FSAE Lincoln Universitat Stuttgart of Germany and Auburn University of the U.S. take crowns at SAE Collegiate Design Series Formula competitions. Michigan Baja Racing repeats as Baja SAE season champion Coming in second is Rochester Institute of Technology, which was victorious in one of the 3 Baja SAE competitions.
2016-10-03
Magazine
All about the engine The University of Wisconsin-Madison team increases engine displacement and implements exhaust gas recirculation to maintain winning ways in SAE Clean Snowmobile Challenge. Fluid mechanics of diesel injection studied at Penn State Special photography method helps student researchers get a better look at spray patterns. Under new management A senior-heavy squad from Minnesota State University, Mankato, takes a different approach to team dynamics and jumps 34 spots to 17th overall at the 2016 Formula SAE Michigan competition.
2016-04-08
Magazine
Software's role continues to expand Design teams use different technologies to create new software and link systems together. Emissions regulations and engine complexity With the European Commission announcing a Stage V criteria emissions regulation for off-highway, scheduled to phase-in as earlly as 2019, there will be an end to a brief era of harmonized new-vehicle regulations. Will this affect an already complex engine development process? Evaluating thermal design of construction vehicles CFD simulation is used to evaluate two critical areas that address challenging thermal issues: electronic control units and hot air recirculation.
2016-06-03
Magazine
Executive viewpoints Industry leaders offer their insights on the state of the heavy-duty on- and off-highway industries in this annual series of opinion pieces. The executives share their views on the most pressing technologies and trends shaping their business and the industry moving forward. Annual Product Guide Top products from throughout the industry covering technologies such as Powertrain & Energy, Hydraulics, Electronics, and Testing & Simulation.
2016-08-16
Magazine
Types of aircraft passenger-escape systems An overview of existing and potential new methods for assuring aircraft occupant safety. SAE Skill India Initiative: S2I2 A new SAEINDIA collaboration aims to help young engineers acquire "industry-ready" skills. A technology-driven sustainable-agriculture solution Pumping more air into the cylinder is key to solving the CAFE puzzle, and engineers are hard at work figuring out the best ways to do it with turbocharger and supercharger innovation. Rotorcraft icing computational tool development 3D printing machines can't be built fast enough In the additive-manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
2016-02-01
Magazine
Stanford goes solar down under Team takes sixth place in Bridgestone World Solar Challenge to cap a rigorous two-year design and development program. Taking the lead Being in charge of an SAE Student Chapter entails everything from organizing meetings to issuing 'nastygrams.' A winning video from a winning Collegiate Design Series team The defending champion of the Formula SAE Michigan competition, Oregon State University, has found another way to win. SAE U.K. Section co-hosts lecture series 'starring' NASA engineer/expert Dr. Ravi Margasahayam of NASA is the engineer responsible for ensuring payload safety for the Space Shuttle and the International Space Station.
2016-11-16
Magazine
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
2010-01-14
Magazine
Software takes center stage Programs for hydraulics must combine reliability and flexibility. Technical Innovations Carraro launches concept variable transmission transaxle. Original Eqipment Case CE says new crawler dozer offers big performance, not weight.
2010-10-27
Magazine
Toward cockpit 3.0 Avionics developments further revolutionize the commercial cockpit environment.
2010-11-04
Magazine
Why Volt? After 48 months' development, the 2011 Chevrolet Volt has enetered series production. The pioneering "E-REV" is as important to the mobility industry as it is to GM. Creating the heart of Volt GM's battery requirements meant creating new state-of-the-art in-vehicle engery storage - and doing it in less than four years. Top GM and supplier engineers reveal how they did it. Engineering with maniacal focus A dedicated, cohesive team and a conservative engineering approach put this innovative vehicle into production at moon-shot speed. A unique electrified transaxle Hybrid or not? Definitions aside, what really matters is GM wisely leveraged its next-generation Two Mode propulsion technology to give Volt greater overall efficiency. Sweating the body details Extensive wind-tunnel work gave Volt a shape that's slicker than it looks. But engineers aren't happy with the curb weight.
2010-07-08
Magazine
A good defense The latest military ground-vehicle navigation and communications give crews unprecedented situational awareness and on-the-move capability.
2010-02-01
Magazine
Giving the blind the freedom to drive A Virginia Tech student team answers a call to action by the National Federation of the Blind's Jernigan Institute. 'Ultimate Youthmobile' of 2030 At the 2009 LA Auto Show, California designers envision the future. BMW's six-cylinder motorcycle Concept points to possible production bike. Modeling and simulation put emphasis on early planning The shift to model-based design and simulation is changing the way aircraft are designed, shifting the focus to the early phases of development. Early planning is critical for success, as is establishing techniques that ensure that files move freely between various work teams.
2010-04-05
Magazine
Switching to new controls Hall-effect switches, LEDs transform cab interiors. Save the weight For efficiency improvements, the desire to reduce the mass of vehicle subsystems is far greater than the ability. As a result, off-highway suppliers must seek innovation and technological advances through other means.
2010-06-03
Magazine
Developing next-generation biofuels Spurred by concerns over national security, future supplies of petroleum, and greenhouse gas emissions, many are looking for fuel from biological renewable sources. Control strategies take many paths I/O, EMC, and SIL are among the acronyms transforming controller development. Lean, green, and marine Following the lead set by road and air transportation, sea vessels are turning to increased amounts of composite materials in their construction.
2010-12-16
Magazine
Programmed for success Software plays an increasingly important role in equipment design, bringing new functions and enhanced efficiency.
2011-03-01
Magazine
Future testing of active safety systems To speed up the introduction of active safety systems, efficient standardized test programs are needed, including alternatives to test-track testing. Engine management on a budget Tata Technologies engineers at the recent SAE Convergence event provided an inside look at how they developed the Nano's low-cost EMS and reduced development time and cost with extensive use of modern tools. Racing for the green Changes are coming to Indy Car and Formula One to focus on green technology that applies to production vehicles. Taking strides together SAE 2011 World Congress host company General Motors touts teamwork as a way to expand industry knowledge and encourage energy efficiency.
2011-04-05
Magazine
AEI Best Engineered Vehicle 2011- Chevrolet Volt General Motors' pioneering E-REV eliminates range-to-empty worries with a cleverly engineered powertrain that makes Volt the right EV at the right time- and AEI's Best Engineered Vehicle for 2011. Government boost key to biofuel future Biofuel companies are determined to become viable on their own but want continued government assistance if oil companies receive assistance, too. More from less Trimming fuel consumption and emissions requires higher voltages, greater computing power, and more money. Finding the right balance Engineers identify key technology trends such as the necessity for lighter, smaller engines and vehicles- and stress that managing trade-offs is an especially tough challenge. Automotive Engineering International 2011 tech awards The editors of Automotive Engineering International preview the most innovative supplier technologies to be displayed April 12-14 in Detroit at the SAE 2011 World Congress.
2011-01-18
Magazine
Head units connect Does the radio that has everything need a place to store it?
2011-12-15
Magazine
Safety steps up Electronic controls let suppliers improve safety without sacrificing reliability.
2012-06-19
Magazine
No time to sit still Seat developers are revising architectures and components to provide more functions at lower costs.
2012-09-04
Magazine
The Lexus rises again Kiyotaka Ise is leading the effort to redefine the Toyota luxury brand with 'Lexus emotionality.' Hyundai powers ahead Dr. Woong-Chul Yang, Vice Chairman, Hyundai Motor, and the head of Hyundai-Kia R&D, explains how his company is striving to be the most-loved, but not necessarily the biggest car company-with the help of technology and powertrain leadership from Seong-Hyon Park, Hyundai's President of Powertrain. Next-generation lithium batteries step forward Developmental solid-state lithium-ion and lithium-air batteries could one day provide ample EV power.
2012-02-15
Magazine
Bright outlook for glass cockpits Cockpits are adopting larger screens and touch input, using modularity to ease upgrades. Composites give copters a lift Design, fabrication, and analysis of a tail rotor blade made of composite laminated materials for a heavy transport helicopter. Taming overruns with simulation For aerospace projects, cost overruns and program delays start in the concept and proposal stage. How could using today's advanced CAE simulations earlier reduce that risk? Going modular with airborne radar Innovative approaches to solving the affordability challenge posed by too many specialist airborne surveillance systems. Efficient & effective leadership Frank O. Klegon, a 30-year SAE member and former product development VP at Chrysler, brings 'customer first' approach to term as SAE International's chief elective officer.
2012-04-11
Magazine
Putting CAE to work for non-experts CAE suppliers respond to the need to do more with less in a number of ways, including guided work flows and role-specific interfaces.
2012-05-16
Magazine
New blades turning Industry is in the midst of new initiatives to develop lighter, stronger aero engine fan blades. ATM revolution-on the way at last A look at one of the biggest issues facing the air transport sector: integrating air traffic management policies and solutions. A new positioning system for aircraft structural assembly The EcoPositioner is a modular and reconfigurable positioning technology that takes into consideration the positioning task as well as operational conditions and environmental influences.
2012-01-17
Magazine
Designing batteries for longer life Engineers at battery makers are striving to boost life by carefully balancing charge rate, cooling, safety margins, casing size, and protection.
2012-03-06
Magazine
Safe and sane Driver distraction, demand for connectivity, and infotainment raise new challenges in combining consumer technologies and cars. Thin on the inside Seat suppliers apply ingenuity to reduce the weight of traditional steel seat frames while trimming away foam to make smaller cars roomier. Early simulation enhances product development While simulating before design may seem to upend the traditional view of product development, many companies are realizing the benefits.
2012-03-20
Magazine
An active ride Advanced suspension technology helps SUVs meet often conflicting requirements to perform better off road and on.
2012-01-28
Magazine
Electrochemical reactions Students from the Department of Automotive Engineering at the NED University of Engineering and Technology build the first onboard fuel-cell vehicle of Pakistan. The Baja balance How to combine heavy homework load with your CDS team responsibilities. Embraer progresses on clean-sheet military program It has been over two years since Embraer announced that it would be developing the KC-390 military airlift and tanker jet under a contract with the Brazilian Air Force (FAB), which established the requirements for the aircraft as it did with other Embraer military programs. Calling all recruiters Lack of response to distributed resumes leaves many wondering, is anyone out there?
Viewing 1 to 30 of 1053

Filter

  • Magazine
    1053
  • Range:
    to:
  • Year: