Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 141
2016-09-01
Magazine
Ruling the skies Warsaw University of Technology and Georgia Tech dominate SAE Aero Design competitions. European teams take top spots at FSAE Michigan, U.S. teams at FSAE Lincoln Universitat Stuttgart of Germany and Auburn University of the U.S. take crowns at SAE Collegiate Design Series Formula competitions. Michigan Baja Racing repeats as Baja SAE season champion Coming in second is Rochester Institute of Technology, which was victorious in one of the 3 Baja SAE competitions.
2016-04-08
Magazine
Software's role continues to expand Design teams use different technologies to create new software and link systems together. Emissions regulations and engine complexity With the European Commission announcing a Stage V criteria emissions regulation for off-highway, scheduled to phase-in as earlly as 2019, there will be an end to a brief era of harmonized new-vehicle regulations. Will this affect an already complex engine development process? Evaluating thermal design of construction vehicles CFD simulation is used to evaluate two critical areas that address challenging thermal issues: electronic control units and hot air recirculation.
2016-06-03
Magazine
Executive viewpoints Industry leaders offer their insights on the state of the heavy-duty on- and off-highway industries in this annual series of opinion pieces. The executives share their views on the most pressing technologies and trends shaping their business and the industry moving forward. Annual Product Guide Top products from throughout the industry covering technologies such as Powertrain & Energy, Hydraulics, Electronics, and Testing & Simulation.
2016-11-16
Magazine
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
2010-11-01
Magazine
Competitions demonstrate effectiveness of project-based learning Mississippi State University students designed and fabricated award-winning hybrid-electric vehicles with support from industrial mentors. The journey of Lakehead University's rookies (of the year) Ryan Clark, communications manager, tells the two-year story behind a Formula SAE team with meager resources but big dreams. Chevrolet Volt When General Motors management approved its 2011 E-REV for production, the batteries-and other technologies-did not exist. Finding off-highway's top model Modeling, simulation advances help engineers get complex designs to market quickly. Behavioral interviews-3 steps to great answers Sometimes referred to as a competency-based interview, how a candidate responds to questions about previous behaviors can make or break the chances of landing a job.
2010-01-28
Magazine
For operators, a more quiet day at the office New materials that reduce weight and new strategies that control vibrations are finding their way into heavy equipment. The result is a bit more agility and efficiency.
2010-01-14
Magazine
Software takes center stage Programs for hydraulics must combine reliability and flexibility. Technical Innovations Carraro launches concept variable transmission transaxle. Original Eqipment Case CE says new crawler dozer offers big performance, not weight.
2010-02-25
Magazine
Metering hydraulic characteristics Multidimensional simulation is increasingly applied to the investigation of the fluid dynamics behavior of hydraulic components.
2010-02-03
Magazine
Checking on safety As safety moves into the spotlight, many diagnostic techniques ensure that all the elements work reliably. Going green, quietly The emphasis on reduced emissions is not about to affect teh attention given to the desired levels of comfort and refinement in vehicles.
2010-09-23
Magazine
Tier 4 puts pressure on hydraulics Smaller pumps, smarter controllers help maintain power levels even as engine power declines.
2010-10-01
Magazine
A 'defensive' approach Oshkosh Corp. is providing executive leadership for this year's SAE Commercial Vehicle Engineering Congress, placing more emphasis on the military and defense businesses, and how those activities align with the commercial vehicle industry. Hybrid and mighty Having gained popularity un the automotive sector, many suppliers of hybrid drives are engineering their battery-electric offerings for the off-highway market. Customers, in turn, are experiencing major gains in efficiency and economy. Finding off-highway's top model Modeling, simulation advances help engineers get complex design to market quickly. Roll your own Technological advances into autonomously controlled vehicles facilitate road trains and troop support.
2010-03-11
Magazine
Applying emissions control strategies MTU Detroit Diesel comes clean about what it feels is its best path to Tier 4 Interim off-highway emissions compliance.
2010-03-25
Magazine
Still need steel? The use of ultra-high-strength steels is on the rise in a number of industries, including off-highway. But many alternatives are being considered, driven by the need of companies to be environmentally friendly.
2010-04-22
Magazine
Cleaner living A different approach to powertrain emissions testing is needed as the off-highway industry prepares to meet the challenges of forthcoming Tier 4 standards, both Interim and Final.
2010-04-05
Magazine
Switching to new controls Hall-effect switches, LEDs transform cab interiors. Save the weight For efficiency improvements, the desire to reduce the mass of vehicle subsystems is far greater than the ability. As a result, off-highway suppliers must seek innovation and technological advances through other means.
2010-05-06
Magazine
Clutch-application monitoring Fault monitors for off-highway equipment offer a means of minimizing the severity of transmission tie-ups.
2010-05-20
Magazine
What's wrong with me? Diagnostics systems provide more data to reduce downtime.
2010-06-03
Magazine
Developing next-generation biofuels Spurred by concerns over national security, future supplies of petroleum, and greenhouse gas emissions, many are looking for fuel from biological renewable sources. Control strategies take many paths I/O, EMC, and SIL are among the acronyms transforming controller development. Lean, green, and marine Following the lead set by road and air transportation, sea vessels are turning to increased amounts of composite materials in their construction.
2010-12-16
Magazine
Programmed for success Software plays an increasingly important role in equipment design, bringing new functions and enhanced efficiency.
2011-11-17
Magazine
Technology crosses industry borders Between the commercial- and military - vehicle markets, knowledge sharing and tech transfer benefit both in areas such as vehicle electrification and alternative fuels.
2012-01-12
Magazine
Cummins digs in with high-speed diesel Cummins started with a clean sheet, and some legacy technology, for what it describes at the most powerful highspeed diesel ever built.
2012-03-01
Magazine
On the cusp of connected cars An auto consortium is set to put the wireless V2X safety network to the test with 120 cars in the Frankfurt region. Thinking long and hard about heavy-duty telematics A study of the factors that should be considered by a vehicle OEM when implementing a telematics solution in heavy on- and off-highway mobile equipment markets.
2015-12-02
Magazine
Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions. A switching roller finger follower is one of the technologies that help make it work. Pumping up hydraulic capabilities Electrohydraulic advances keep coming as distributed electronics flex their muscle. Tracking the trends in commercial vehicle communications Industry insiders at Molex offer what they think the future may hold for heavy-duty components in 24/7 communications systems. ADAS system validation It is crucial that different advanced driver assistance systems functionalities interact seamlessly with existing electronic control unit (ECU) networks.
2016-08-05
Magazine
Clearing the air Sensors, diagnostics and controls advance to help trap emissions. Bringing the heat on cooling technologies Electronic controls, variable-speed fans cool engines, heat aftertreatment systems. 3D printing machines can't be built fast enough In the additive manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
2011-11-01
Magazine
Driving the pace of change Engineers speak out on software's impact on the automotive industry in online survey. Inside ZF's nine-speed transaxle for 2012 AEI travels to Friedrichshafen for an exclusive look at the development and technology behind the 9HP--the industry's first nine-speed transaxle slated for MY2013 production. Technology crosses industry borders Between the commercial- and military vehicle markets, knowledge sharing and tech transfer benefits both in areas such as vehicle electrification and altenative fuels. Cutting the cost of carbon Automakers streamline production to reduce the price premium for lightweight carbon fiber.
2011-11-30
Magazine
The buzz about electric aircraft Emissions limits force the aviation industry to study hybrid and battery-electric propulsion systems. Car-to-X marks the secure beamforming spot Intelligent networking of cars and infrastructure promises a future of enhanced active safety and traffic efficiency, though as an open and decentralized system, car-to-X is exposed to various attacks against security and driver's privacy. Talking big A look at factors that should be considered by OEMs when implementing a telematics solution in the heavy-duty on- and off-highway mobile equipment markets.
2011-09-01
Magazine
The man challenges of Tier 4 engineering Cutting and controlling emissions are the surface goals, but designers must also manage to cut and control costs, while adding complexity. A cool look at heat protection CFD is used to predict flow and thermal fields within the engine compartment both at steady state and transient conditions. Hushing hydraulics Researchers from the Georgia Institute of Technology put their energies into novel, compact devices for reducing fluid-borne noise.
2011-08-11
Magazine
Working together to meet Tier 4 requirements Engines and hydraulics are brought together by electronics and software. Turning engineers on- and off Top engineering executives from Daimler Trucks North America lead the technology discussion at this year's SAE Commercial Vehicle Engineering Congress, again covering topics paramount to both on- and off- highway engineers.
2011-06-16
Magazine
Perking up fatigue analysis with simulation Using CAE simulation tools for fatigue and durability offers advantages to off-highway equipment engineers as they have grown in capability.
2011-07-07
Magazine
What we have here is a desire to communicate Telematic service and equipment providers are racing to gain market share in what's expected to become a solid long-term market. Sizing up accumulators No other feature of a hydraulic hybrid has more effect on the end performance of the powertrain than the accumulator. modeling helps to provide specific guidance with regard to establishing pre-charge pressure. Beating a path to biodiesel Multiple pathways are being pursued to increase biodiesel use, reduce dependence on petroleum, and improve the environment, but the best route is not yet known.
Viewing 1 to 30 of 141

Filter

  • Magazine
    141
  • Range:
    to:
  • Year: