Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 188
2015-05-12
WIP Standard
ARP5448/4A
This test method outlines a recommended procedure for performing bond integrity tests of bonded peelable woven fabric reinforced polytetrafluoroethylene (PTFE) liners, hereafter referred to within this document as "PTFE liner" or "liner". The data from these tests shall be used to determine if the product meets the "bond integrity" requirements of the applicable specifications.

Bearings covered by this test method shall be plain shperical, track roller, journal or rod end bearing with PTFE liners.

HISTORICAL
2003-03-12
Standard
ARP5448/5
This test method provides a procedure for measuring no-load rotational breakaway torque of self-lubricating spherical bearings.
CURRENT
2002-06-06
Standard
ARP5448/4
This test method outlines a recommended procedure for performing bond integrity tests of bonded peelable woven fabric reinforced polytetrafluoroethylene (PTFE) liners, hereafter referred to within this document as "PTFE liner" or "liner". The data from these tests shall be used to determine if the product meets the "bond integrity" requirements of the applicable specifications.
CURRENT
2016-07-19
Standard
ARP5448/3A
This test method outlines a recommended procedure for performing unidirectional load dynamic testing of self-lubricating bearings at room temperature, elevated temperature or sub-zero temperature, dry or contaminated with fluids. The wear data from these tests is to be used for qualification and to establish bearing design criteria.
HISTORICAL
2002-07-31
Standard
ARP5448/3
This test method outlines a standard procedure for performing unidirectional load dynamic testing of self-lubricating bearings at room temperature, elevated temperature or sub-zero temperature, dry or contaminated with fluids. The wear data from these tests is to be used for qualification and to establish bearing design criteria.
CURRENT
2007-07-09
Standard
ARP5448/2
This test method outlines a standard procedure for performing cyclic reversing load testing on oscillating sliding bearings. The wear data from these tests is to be used for qualification requirements and to establish bearing design criteria.
CURRENT
2016-11-12
Standard
ARP5448/1A
This test method outlines the recommended procedure for performing radial limit load and ultimate load tests on low speed airframe and high speed helicopter rotor head bearings.
HISTORICAL
2001-03-01
Standard
ARP5448
This SAE Aerospace Recommended Practice (ARP) establishes methods for testing airframe plain bearings. The purpose of ARP5448 and its associated slash sheets is to document test methods commonly used to evaluate airframe bearings. These test methods may be referenced in specifications, part standards, purchase orders, etc. when the test is deemed appropriate to the intended use of the bearing by the end user of the bearing. These test methods are not intended to encompass every conceivable requirement for an airframe bearing. The end user of the bearing must exercise engineering judgment to determine the most appropriate standard and/or nonstandard tests for the application.
HISTORICAL
2004-07-01
Standard
ARP5448/1
This test method outlines the recommended procedure for performing radial limit load and ultimate load tests on low speed airframe and high speed helicopter rotor head bearings.
CURRENT
2013-10-04
Standard
ARP5448B
This SAE Aerospace Recommended Practice (ARP) establishes methods for testing airframe plain bearings. The purpose of ARP5448 and its associated slash sheets is to document test methods commonly used to evaluate airframe bearings. These test methods may be referenced in specifications, part standards, purchase orders, etc., when the test is deemed appropriate to the intended use of the bearing by the end user of the bearing. These test methods are not intended to encompass every conceivable requirement for an airframe bearing. The end user of the bearing must exercise engineering judgment to determine the most appropriate standard and/or nonstandard tests for the application.
HISTORICAL
2007-07-09
Standard
ARP5448A
This SAE Aerospace Recommended Practice (ARP) establishes methods for testing airframe plain bearings. The purpose of ARP5448 and its associated slash sheets is to document test methods commonly used to evaluate airframe bearings. These test methods may be referenced in specifications, part standards, purchase orders, etc. when the test is deemed appropriate to the intended use of the bearing by the end user of the bearing. These test methods are not intended to encompass every conceivable requirement for an airframe bearing. The end user of the bearing must exercise engineering judgment to determine the most appropriate standard and/or nonstandard tests for the application.
2017-05-01
WIP Standard
ARP5448/9B
This test method establishes a standard procedure for using plug gages to evaluate dimensional conformance of lined inside diameters of bearings. Bearings covered by this test method include sleeve bearings and lined bore spherical bearings. Note that this method gives no indication of true cylindricity.
CURRENT
2007-03-06
Standard
ARP5448/9A
This test method establishes a standard procedure for using plug gages to evaluate dimensional conformance of lined inside diameters of bearings. Bearings covered by this test method include sleeve bearings and lined bore spherical bearings. Note that this method gives no indication of true cylindricity.
HISTORICAL
2001-03-01
Standard
ARP5448/9
This test method establishes a standard procedure for using plug gages to evaluate dimensional conformance of lined inside diameters of bearings. Bearings covered by this test method include sleeve bearings and lined bore spherical bearings. Note that this method gives no indication of true cylindricity.
CURRENT
2016-12-12
Standard
ARP5448/7A
This standard details two methods of inspecting PTFE lined spherical or journal bearing wear outside the test apparatus. The methods described herein are applicable only to bearings which were unidirectionally loaded and the area of sliding wear is known and held constant throughout the dynamic test. The two methods described are: Destructive Inspection - Cut and measure (not applicable to molded liners) Nondestructive Inspection - Radial play (gauge) measurement
CURRENT
2017-02-21
Standard
ARP5448/6A
This method outlines a standard procedure for performing conformity tests of bearings utilizing liners of bonded polytetrafluoroethylene (PTFE). The data from these tests shall be used to determine if the product meets the conformity requirements of the applicable specification.
CURRENT
2002-07-31
Standard
ARP5448/7
This standard details two methods of inspecting TFE lined spherical or journal bearing wear outside the test apparatus. The methods described herein are applicable only to bearings which were unidirectionally loaded and the area of sliding wear is known and held constant throughout the dynamic test. The two methods described are: Destructive Inspection - Cut and measure (not applicable to molded liners) Non-destructive Inspection - Radial play (gage) measurement
CURRENT
2002-05-21
Standard
ARP5448/6
This method outlines a standard procedure for performing conformity tests of bearings utilizing liners of bonded polytetrafluoroethylene (PTFE). The data from these tests shall be used to determine if the product meets the conformity requirements of the applicable specification.
CURRENT
2016-11-12
Standard
ARP5448/5A
This test method provides a procedure for measuring no-load rotational breakaway torque of self-lubricating spherical bearings.
CURRENT
2014-12-29
Standard
AS6071
CURRENT
2014-12-29
Standard
AS6072
2017-04-18
WIP Standard
AS21241A
Scope unavailable.
2017-09-19
WIP Standard
AS21233B
No scope available.
2017-09-19
WIP Standard
AS21231B
No scope available.
2017-09-14
WIP Standard
AS21230B
No scope available.
CURRENT
2012-02-02
Standard
AS21233A
2017-09-19
WIP Standard
AS21232B
No scope available.
Viewing 1 to 30 of 188