Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 215
CURRENT
2007-04-05
Standard
AMS2309A
This specification covers an inspection material in the form of a liquid room-temperature vulcanizing rubber filled with magnetic particles which is cured by addition of one or more curing agents. The product may be supplied in a variety of viscosities and colors.
CURRENT
2005-04-25
Standard
AMS2308A
This specification covers the procedural requirements necessary for the performance of magnetic rubber inspection.
HISTORICAL
1994-07-01
Standard
AMS2308
This specification covers the procedural requirements necessary for the performance of magnetic rubber inspection.
HISTORICAL
1994-07-01
Standard
AMS2309
This specification covers an inspection material in the form of a liquid room-temperature vulcanizing rubber filled with magnetic particles which is cured by addition of one or more curing agents. The product may be supplied in a variety of viscosities and colors. This product is used typically in the inspection of ferrous metals for detection of surface cracks.
CURRENT
2009-04-14
Standard
AMS3046F
This specification covers one type of fluorescent magnetic particles in the form of a mixed, ready-to-use suspension in an odorless, inspection oil vehicle and packaged in aerosol cans.
CURRENT
2016-11-29
Standard
AMS2636A
This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy forgings. Premium grade is a term used to describe titanium alloys used for critical rotating components in turbine engines. For details, see SAE AMS2380, the specification that covers the procedures for approval of products of premium-quality titanium alloys and the controls to be exercised in producing such products.
HISTORICAL
1964-01-01
Standard
AMS2635A
Primarily for determining the presence of cracks, porosity, blowholes, inclusions, and other imperfections which may or may not be exposed to the surface and which may be detrimental to usage of the parts.
HISTORICAL
1981-07-01
Standard
AMS2635C
This specification covers the procedures for radiographic inspection.
CURRENT
1999-05-01
Standard
AMS2635D
This specification covers the procedures for radiographic inspection.
2017-09-26
WIP Standard
AMS2634C
This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion and heat resistant steels and alloys having nominal OD over 0.1875 inch (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding + or - 10% of nominal.

This process has been used typically for locating internal defects, such as cracks, voids, seams, and other discontinuities, which may or may not be exposed to the surface, but usage is not limited to such applications.

HISTORICAL
2012-09-24
Standard
AMS2636
This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy forgings. Premium grade is a term used to describe titanium alloys used for critical rotating components in turbine engines. For details, see SAE AMS2380, the specification that covers the procedures for approval of products of premium-quality titanium alloys and the controls to be exercised in producing such products.
HISTORICAL
1967-04-01
Standard
AMS2635B
CURRENT
1996-11-01
Standard
AMS2634B
This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion and heat resistant steels and alloys having nominal OD over 0.1875 inch (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.
HISTORICAL
1958-08-01
Standard
AMS2635
Primarily for determining the presence of cracks, porosity, blowholes, inclusions, and other imperfections which may or may not be exposed to the surface and which may be detrimental to usage of the parts.
2017-09-20
WIP Standard
AMS2628B
This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy round billet 5.0 inches (127 mm) and over in nominal diameter. This inspection procedure has been used typically for locating internal defects such as cracks, voids, inclusions, and other structural discontinuities which may or may not be exposed to the surface in billets, but usage is not limited to such applications. Testing normally will be by longitudinal procedure, but shear wave procedure may be added when agreed upon by purchaser and vendor. This specification includes zoned inspection and digital data acquisition.
HISTORICAL
1996-10-01
Standard
AMS2628
This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy round billet 5.0 inches (127 mm) and over in nominal diameter.
CURRENT
2013-07-11
Standard
AMS2628A
This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy round billet 5.0 inches (127 mm) and over in nominal diameter.
HISTORICAL
1995-02-01
Standard
AMS2634A
This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion and heat resistant steels and alloys having nominal OD over 0.1875 inch (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.
HISTORICAL
1991-10-01
Standard
AMS2634
This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion and heat resistant steels and alloys having nominal OD over 0.1875 in. (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.
CURRENT
2017-10-30
Standard
AMS2633D
This procedure covers ultrasonic inspection of tubular, centrifugally-cast, corrosion-resistant steel cylinders.
HISTORICAL
1995-04-01
Standard
AMS2633B
This procedure covers ultrasonic inspection of tubular, centrifugally-cast, corrosion-resistant steel cylinders. This procedure has been used typically for locating defects such as cracks, voids, spongy areas, and other discontinuities, but usage is not limited to such applications. This procedure is not applicable to austenitic steels where grain boundaries mask results. Immersion inspection is applicable to tubular products whose wall thickness is 0.5 to 9.0 inches (13 to 229mm). Contact inspection is applicable to tubular product whose wall thickness is 3.0 to 9.0 inches (76 to 229 mm).
HISTORICAL
1989-10-01
Standard
AMS2633A
This procedure covers ultrasonic inspection of tubular, centrifugally-cast, corrosion-resistant steel cylinders.
2013-10-18
WIP Standard
AMS2632B
This specification covers the procedure for ultrasonic inspection of flat, contoured, and cylindrical products having a cross sectional-thickness of 0.02 to 0.5 inches (0.5 to 12.7 mm). This specification does not apply to inspection of composite materials.

This process has been used typically for locating and defining internal defects such as cracks, voids, laminations, and other structural discontinuities which may or may not be exposed to the surface, but usage is not limited to such applications.

HISTORICAL
1977-07-01
Standard
AMS2633
This procedure covers ultrasonic inspection of tubular, centrifugally-cast, corrosion-resistant steel cylinders.
HISTORICAL
1991-10-01
Standard
AMS2632
This specification covers the procedure for ultrasonic inspection of flat, contoured, and cylindrical products having a cross sectional thickness of 0.02 - 0.5 in. (0.5 - 13 mm). This specification does not apply to inspection of composite materials.
CURRENT
1995-03-01
Standard
AMS2632A
This specification covers the procedure for ultrasonic inspection of flat, contoured, and cylindrical products having a cross-sectional thickness of 0.02 to 0.50 inches (0.5 to 12.7 mm). This specification does not apply to inspection of composite materials.
HISTORICAL
1964-01-01
Standard
AMS2646A
Detection of discontinuities such as cracks, laps, porosity, cold shuts, lack of bond, and similar defects. Because inspection can be performed in normal light, this method can be used when fluorescent penetrant inspection is impracticable.
HISTORICAL
1969-05-01
Standard
AMS2646B
HISTORICAL
1991-10-15
Standard
AMS2646C
This specification establishes a procedure for detection of discontinuities open to the surface of parts by the use of a penetrating dye.
Viewing 1 to 30 of 215