Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 83
HISTORICAL
1980-10-01
Standard
J1180_198010
This SAE Recommended Practice applies to mobile cranes when used in lifting crane service which are equipped with boom length indicating devices. The purpose of this recommended practice is to establish the minimum performance requirements of systems which measure and display to the operator, or other responsible persons, the boom length at which a load is being lifted by cranes with variable length, telescopic booms.
CURRENT
2012-05-02
Standard
J1180_201205
This SAE Recommended Practice applies to mobile cranes when used in lifting crane service which are equipped with boom length indicating devices.
HISTORICAL
1977-03-01
Standard
J1180_197703
This SAE Recommended Practice applies to mobile cranes when used in lifting crane service which are equipped with boom length indicating devices. The purpose of this recommended practice is to establish the minimum performance requirements of systems which measure and display to the operator, or other responsible persons, the boom length at which a load is being lifted by cranes with variable length, telescopic booms.
HISTORICAL
1980-10-01
Standard
J1028_198010
This SAE Recommended Practice applies to stationary usage of mobile construction-type cranes, crawler or rubber-tire mounted, on outriggers or on tires, when used for lifting crane, clamshell, dragline, magnet, pile driver, or similar service.
HISTORICAL
1980-08-01
Standard
J1028_198008
This SAE Recommended Practice applies to stationary usage of mobile construction-type cranes, crawler or rubber-tire mounted, on outriggers or on tires, when used for lifting crane, clamshell, dragline, magnet, pile driver, or similar service.
CURRENT
1998-10-01
Standard
J1028_199810
This SAE Recommended Practice applies to stationary usage of mobile construction-type cranes, crawler or rubber-tire mounted, on outriggers or on tires, when used for lifting crane, clamshell, dragline, magnet, pile driver, or similar service.
2017-08-16
WIP Standard
J1028
This SAE Recommended Practice applies to stationary usage of mobile construction-type cranes, crawler or rubber-tire mounted, on outriggers or on tires, when used for lifting crane, clamshell, dragline, magnet, pile driver, or similar service.
CURRENT
2013-06-17
Standard
J1063_201306
This SAE Standard applies to mobile, construction-type lifting cranes of the cantilever boom type (Figure 1). Questions and comments regarding application or interpretation of the provisions in this test method should be referred to the originating SAE Committee.1
HISTORICAL
1993-11-18
Standard
J1063_199311
This SAE Standard applies to mobile, construction-type lifting cranes of the cantilever boom type. Questions and comments regarding application or interpretation of the provisions in this test method should be referred to the originating SAE Committee. The purpose of this test method is to provide a systematic, nondestructive procedure for determining the stresses induced in cantilevered boom crane structures under specified conditions of static loading through use of resistance-type electric strain gages, and to specify appropriate stress levels for specified loading conditions. Further, a 25% overload test is included to prove the overall structural integrity of the structure.
HISTORICAL
1980-10-01
Standard
J1063_198010
This SAE Standard applies to mobile, construction-type lifting cranes of the cantilever boom type. Questions and comments regarding application or interpretation of the provisions in this test method should be referred to the originating SAE Committee. The purpose of this test method is to provide a systematic, nondestructive procedure for determining the stresses induced in cantilevered boom crane structures under specified conditions of static loading through use of resistance-type electric strain gages, and to specify appropriate stress levels for specified loading conditions. Further, a 25% overload test is included to prove the overall structural integrity of the structure.
HISTORICAL
1974-01-01
Standard
J1063_197401
This SAE Standard applies to mobile, construction-type lifting cranes of the cantilever boom type. Questions and comments regarding application or interpretation of the provisions in this test method should be referred to the originating SAE Committee. The purpose of this test method is to provide a systematic, nondestructive procedure for determining the stresses induced in cantilevered boom crane structures under specified conditions of static loading through use of resistance-type electric strain gages, and to specify appropriate stress levels for specified loading conditions. Further, a 25% overload test is included to prove the overall structural integrity of the structure.
2017-08-15
WIP Standard
J1093
This SAE Information Report applies to wire rope supported, latticed crane boom systems mounted on mobile construction type cranes for lift crane service. The purpose of this document is to establish criteria for the analytical evaluation of the basic structural competence of wire rope supported latticed crane boom systems. The criteria and procedures specified include the evaluation of elastic stability for the overall boom system and individual members of the system.
HISTORICAL
1994-03-01
Standard
J1093_199403
This SAE Information Report applies to wire rope supported, latticed crane boom systems mounted on mobile construction type cranes for lift crane service. The purpose of this document is to establish criteria for the analytical evaluation of the basic structural competence of wire rope supported latticed crane boom systems. The criteria and procedures specified include the evaluation of elastic stability for the overall boom system and individual members of the system.
HISTORICAL
1982-06-01
Standard
J1093_198206
This SAE Information Report applies to wire rope supported, latticed crane boom systems mounted on mobile construction type cranes for lift crane service. The purpose of this document is to establish criteria for the analytical evaluation of the basic structural competence of wire rope supported latticed crane boom systems. The criteria and procedures specified include the evaluation of elastic stability for the overall boom system and individual members of the system.
CURRENT
2007-11-16
Standard
J1093_200711
This SAE Information Report applies to wire rope supported, latticed crane boom systems mounted on mobile construction type cranes for lift crane service.
2012-03-06
WIP Standard
J159
This SAE Standard applies to cranes when used in lifting service that are equipped with Rated Capacity Systems. Purpose The purpose of this document is to establish the minimum performance and tolerance criteria of systems used to warn or to indicate to the operator and/or other responsible persons when the load being lifted approaches, meets and exceeds the rated capacity on the applicable rated capacity chart of the crane.
CURRENT
2002-10-30
Standard
J159_200210
This SAE Standard applies to cranes when used in lifting service that are equipped with Rated Capacity Systems.
HISTORICAL
1985-04-01
Standard
J159_198504
This SAE Standard applies to cranes when used in lifting service that are equipped with Rated Capacity Systems. Purpose The purpose of this document is to establish the minimum performance and tolerance criteria of systems used to warn or to indicate to the operator and/or other responsible persons when the load being lifted approaches, meets and exceeds the rated capacity on the applicable rated capacity chart of the crane.
HISTORICAL
1994-04-01
Standard
J159_199404
This SAE Recommended Practice applies to cranes when used in lifting-crane service which are equipped with load moment devices. The purpose of this document is to establish the minimum performance criteria of systems used to warn or indicate to the operator and/or other responsible persons when the load being lifted approaches and meets the rated load value on the applicable load-rating chart of the crane.
HISTORICAL
1977-03-01
Standard
J159A_197703
This SAE Standard applies to cranes when used in lifting service that are equipped with Rated Capacity Systems. Purpose The purpose of this document is to establish the minimum performance and tolerance criteria of systems used to warn or to indicate to the operator and/or other responsible persons when the load being lifted approaches, meets and exceeds the rated capacity on the applicable rated capacity chart of the crane.
2017-09-17
WIP Standard
J1257
This recommended practice applies to mobile construction type cranes with cantilevered, telescopic booms when used in lifting crane service.
HISTORICAL
1979-04-01
Standard
J1257_197904
This recommended practice applies to mobile construction type cranes with cantilevered, telescopic booms when used in lifting crane service.
CURRENT
2012-02-21
Standard
J1257_201202
This recommended practice applies to mobile construction type cranes with cantilevered, telescopic booms when used in lifting crane service.
HISTORICAL
1980-10-01
Standard
J1257_198010
This recommended practice applies to mobile construction type cranes with cantilevered, telescopic booms when used in lifting crane service.
HISTORICAL
1981-04-01
Standard
J1289_198104
To establish conditions to be taken into consideration in determining rated loads for mobile cranes when overturning stability is the controlling factor. This recommended practice applies to mobile, construction-type lifting cranes with either lattice booms or cantilevered, telescopic booms.
CURRENT
2013-03-28
Standard
J1289_201303
To establish conditions to be taken into consideration in determining rated loads for mobile cranes when overturning stability is the controlling factor. This recommended practice applies to mobile, construction-type lifting cranes with either lattice booms or cantilevered, telescopic booms.
CURRENT
2007-11-16
Standard
J1305_200711
This SAE Recommended Practice applies to cranes in lifting crane service which are equipped with two-block warning and/or limit systems.
2013-06-28
WIP Standard
J1305
The purpose of this SAE Recommended Practice is to establish the minimum performance requirements of devices which signal and/or automatically prevent two-blocking. This SAE Recommended practice applies to cranes in lifting crane service which are equipped with two-block warning and/or limit systems.
HISTORICAL
1987-06-01
Standard
J1305_198706
The purpose of this SAE Recommended Practice is to establish the minimum performance requirements of devices which signal and/or automatically prevent two-blocking. This SAE Recommended practice applies to cranes in lifting crane service which are equipped with two-block warning and/or limit systems.
2013-06-28
WIP Standard
J1332
The purpose of this recommended practice is to establish the minimum performance requirements for devices used to indicate to the crane operator by visual, audible, or tactile means the movement of a rope drum. This SAE Recommended Practice applies to cranes when used in lifting crane service which are equipped with rope drum rotation indicating devices.
Viewing 1 to 30 of 83