Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 3535
HISTORICAL
1974-12-01
Standard
AMS3380B
This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible hose reinforced with wire braid.
HISTORICAL
1983-07-01
Standard
AMS3380C
This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible hose reinforced with wire braid.
CURRENT
1991-04-01
Standard
AMS3380D
This specification covers a polytetrafluoroethylene resin in the form of extruded and sintered flexible tube reinforced with wire braid.
HISTORICAL
1960-01-01
Standard
AMS3380
This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible tube reinforced with wire braid. Primarily for fluid lines operating in service up to 230 degrees C (446 degrees F) and under pressures up to 1500 psi (10,342 kPa).
HISTORICAL
1965-09-01
Standard
AMS3380A
This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible tube reinforced with wire braid. Primarily for fluid lines operating in service up to 230 degrees C (446 degrees F) and under pressures up to 1500 psi (10,342 kPa).
CURRENT
1993-10-01
Standard
AMS3389D
This specification covers a synthetic rubber in the form of a nonrigid, smooth bore, noncollapsing-type hose.
HISTORICAL
1991-10-01
Standard
AMS3388C
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose.
HISTORICAL
1961-07-01
Standard
AMS3389A
This specification covers a synthetic rubber in the form of a nonrigid, smooth bore, noncollapsing-type hose. This hose has been used typically for fueling aircraft, but usage is not limited to such applications. This hose is not intended for flexible connection between tractor and trailer, to be collapsed for drainage, or for operating pressures higher than 250 psi (1724 kPa).
HISTORICAL
1961-07-01
Standard
AMS3388A
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose. This hose has been used typically for fueling aircraft, but usage is not limited to such applications. This hose is not intended for flexible connection between tractor and trailer, to be collapsed for drainage, or for operating pressures higher than 185 psi (1276 kPa).
HISTORICAL
1991-10-01
Standard
AMS3389C
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose.
HISTORICAL
1958-08-01
Standard
AMS3389
This specification covers a synthetic rubber in the form of a nonrigid, smooth bore, noncollapsing-type hose. This hose has been used typically for fueling aircraft, but usage is not limited to such applications. This hose is not intended for flexible connection between tractor and trailer, to be collapsed for drainage, or for operating pressures higher than 250 psi (1724 kPa).
CURRENT
1993-10-01
Standard
AMS3388D
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose.
HISTORICAL
1958-08-01
Standard
AMS3386
This specification covers a synthetic rubber in the form of soft wall, smooth bore, collapsing-type hose. This hose has been used typically for fueling aircraft from tank trucks or pits where the hose will be rolled flat for stowage on a reel, but usage is not limited to such applications. Not recommended for operating pressures higher than 125 psi (862 kPa).
CURRENT
1993-10-01
Standard
AMS3387E
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing hose with textile reinforcement.
HISTORICAL
1958-08-01
Standard
AMS3388
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose. This hose has been used typically for fueling aircraft, but usage is not limited to such applications. This hose is not intended for flexible connection between tractor and trailer, to be collapsed for drainage, or for operating pressures higher than 185 psi (1276 kPa).
HISTORICAL
1991-10-01
Standard
AMS3386C
This specification covers a synthetic rubber in the form of a soft wall, smooth bore, collapsing type hose.
CURRENT
1993-10-01
Standard
AMS3386D
This specification covers a synthetic rubber in the form of a soft wall, smooth bore, collapsing-type hose.
HISTORICAL
1961-07-01
Standard
AMS3386A
This specification covers a synthetic rubber in the form of soft wall, smooth bore, collapsing-type hose. This hose has been used typically for fueling aircraft from tank trucks or pits where the hose will be rolled flat for stowage on a reel, but usage is not limited to such applications. Not recommended for operating pressures higher than 125 psi (862 kPa).
CURRENT
2008-09-08
Standard
AIR869B
This SAE Aerospace Information Report (AIR) is intended to inform users of the proper use, application, and installation of V-Couplings, which will perform satisfactorily only if they are properly installed. This document informs the user of the correct manner of applying and installing V-Couplings and also cautions against improper use.
HISTORICAL
1992-07-01
Standard
AIR869A
This SAE Aerospace Information Report is intended to inform users of the proper use, application, and installation of V-couplings. V-couplings will perform only if they are properly installed. This document informs the user of the correct manner of applying and installing V-couplings and also cautions against improper use.
HISTORICAL
1992-05-01
Standard
AIR869
CURRENT
1994-08-01
Standard
AIR4918
To present a summary of the guidelines and practices presently being used by the aerospace industry for the selection of coiled tubes, flexible hoses, swivel fittings, and extension fittings in aircraft fluid systems.
HISTORICAL
1978-04-01
Standard
AIR1377
This Aerospace Information Report (AIR) describes equivalent types of equipment that can perform fire tests in accordance with requirements of AS 1055.
CURRENT
1975-09-01
Standard
AIR1378B
This Aerospace Information Report (AIR) is written as a guide for the wording recommended for use, when applicable, in design and procurement specifications for tube fittings and tube assemblies, both for general aerospace fluid power applications and for specific applications.
CURRENT
1980-01-01
Standard
AIR1377A
This Aerospace Information Report (AIR) describes equivalent types of equipment that can perform fire tests in accordance with requirements of AS 1055.
CURRENT
1996-08-01
Standard
AIR1418A
This SAE Aerospace Information Report (AIR) presents flexure fatigue strength of tube fitting joints in the form of graphs showing applied deflection D and total calculated axial stress S versus number of cycles to failure N. The graphs have been prepared from data obtained by actual testing conducted in accordance with ARP1185.
HISTORICAL
1993-04-01
Standard
AIR1418
This information report presents flexure fatigue strength of tube fitting joints in the form of graphs showing applied deflection D and total calculated axial stress S vs. number of cycles to failure N. The graphs have been prepared from data obtained by actual testing conducted in accordance with ARP 1185.
Viewing 1 to 30 of 3535

Filter

  • Standard
    3535
  • Range:
    to:
  • Year: