Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 59
CURRENT
2013-01-02
Standard
J1116_201301
This SAE Standard applies to self-propelled off-road work machines. Included are the following categories: Earthmoving Implements and Attachments Forestry Road Building and Maintenance Specialized Mining Powered Industrial Trucks This SAE Standard does not apply to Agricultural Tractors as defined in ANSI/ASAE S390 although some SAE standards are also applicable to Agricultural Tractors. NOTE: Most standards relating to agricultural tractors and implements are developed by ASABE.
HISTORICAL
2004-11-30
Standard
J1116_200411
This SAE Standard applies to machines that are in regular commercial production. Included are the following categories: Earthmoving Implements and Attachments Agricultural Tractors Forestry In spite of the appearance of the same names, such as tractors in more than one category, further development of this and related standards will demonstrate that there are differences in the fully-equipped working machine that may require distinction as to intended end-point field usage. These differences include: Names of optional implements Names of components of optional implements Definitions of specification terms as affected by installed optional implements Different mounting provisions on the machines for implements and other attachments Differences in design to achieve objectives for performance, durability, or operator or public safety
HISTORICAL
1985-06-01
Standard
J1116_198506
This SAE Standard applies to machines that are in regular commercial production. Included are the following categories: Earthmoving Implements and Attachments Agricultural Tractors Forestry In spite of the appearance of the same names, such as tractors in more than one category, further development of this and related standards will demonstrate that there are differences in the fully-equipped working machine that may require distinction as to intended end-point field usage. These differences include: Names of optional implements Names of components of optional implements Definitions of specification terms as affected by installed optional implements Different mounting provisions on the machines for implements and other attachments Differences in design to achieve objectives for performance, durability, or operator or public safety
HISTORICAL
1981-06-01
Standard
J1116_198106
This SAE Standard applies to machines that are in regular commercial production. Included are the following categories: Earthmoving Implements and Attachments Agricultural Tractors Forestry In spite of the appearance of the same names, such as tractors in more than one category, further development of this and related standards will demonstrate that there are differences in the fully-equipped working machine that may require distinction as to intended end-point field usage. These differences include: Names of optional implements Names of components of optional implements Definitions of specification terms as affected by installed optional implements Different mounting provisions on the machines for implements and other attachments Differences in design to achieve objectives for performance, durability, or operator or public safety
HISTORICAL
1978-04-01
Standard
J1116_197804
This SAE Standard applies to machines that are in regular commercial production. Included are the following categories: Earthmoving Implements and Attachments Agricultural Tractors Forestry In spite of the appearance of the same names, such as tractors in more than one category, further development of this and related standards will demonstrate that there are differences in the fully-equipped working machine that may require distinction as to intended end-point field usage. These differences include: Names of optional implements Names of components of optional implements Definitions of specification terms as affected by installed optional implements Different mounting provisions on the machines for implements and other attachments Differences in design to achieve objectives for performance, durability, or operator or public safety
HISTORICAL
1979-02-01
Standard
J1116_197902
This SAE Standard applies to machines that are in regular commercial production. Included are the following categories: Earthmoving Implements and Attachments Agricultural Tractors Forestry In spite of the appearance of the same names, such as tractors in more than one category, further development of this and related standards will demonstrate that there are differences in the fully-equipped working machine that may require distinction as to intended end-point field usage. These differences include: Names of optional implements Names of components of optional implements Definitions of specification terms as affected by installed optional implements Different mounting provisions on the machines for implements and other attachments Differences in design to achieve objectives for performance, durability, or operator or public safety
HISTORICAL
1977-01-01
Standard
J1116_197701
This SAE Standard applies to machines that are in regular commercial production. Included are the following categories: Earthmoving Implements and Attachments Agricultural Tractors Forestry In spite of the appearance of the same names, such as tractors in more than one category, further development of this and related standards will demonstrate that there are differences in the fully-equipped working machine that may require distinction as to intended end-point field usage. These differences include: Names of optional implements Names of components of optional implements Definitions of specification terms as affected by installed optional implements Different mounting provisions on the machines for implements and other attachments Differences in design to achieve objectives for performance, durability, or operator or public safety
CURRENT
2007-10-11
Standard
J1032_200710
The purpose of this SAE Recommended Practice is to provide a set of recognized definitions as a universally understood means of communication among all people interested in the inherent availability of off-Road Work machines. It is not the intent of this document to provide an absolute measure of unit availability. The intent is to provide common definitions for classifying and evaluating operation, repair, and maintenance data. This recommended practice applies to construction and general purpose industrial machines as categorized in SAE J1116. It describes the parameters related to the inherent availability of the covered classes of Off-Road Self-Propelled Work Machines.
HISTORICAL
1987-04-01
Standard
J1032_198704
The purpose of this SAE Recommended Practice is to provide a set of recognized definitions as a universally understood means of communication among all people interested in the inherent availability of off-Road Work machines. It is not the intent of this document to provide an absolute measure of unit availability. The intent is to provide common definitions for classifying and evaluating operation, repair, and maintenance data. This recommended practice applies to construction and general purpose industrial machines as categorized in SAE J1116. It describes the parameters related to the inherent availability of the covered classes of Off-Road Self-Propelled Work Machines.
HISTORICAL
1981-06-01
Standard
J1069_198106
This SAE Recommended Practice is to outline those procedures and practices which govern the use of an oil change system for quick service of construction and industrial machines as defined in SAE J1116. It will allow owners of a variety of machines to standardize on the quick-disconnect coupling system of their choice. This recommended practice deals with sizes, design considerations, and practices related to evacuating and refilling by positive means any oil compartment. This practice may also by applicable to other fluid compartments and is to supplement rather than eliminate the drain plug. (Ref. ISO TC 131/4/N27.)
HISTORICAL
2007-03-20
Standard
J1069_200703
This SAE Recommended Practice is to outline those procedures and practices which govern the use of an oil change system for quick service of construction and industrial machines as defined in SAE J1116. It will allow owners of a variety of machines to standardize on the quick-disconnect coupling system of their choice. This recommended practice deals with sizes, design considerations, and practices related to evacuating and refilling by positive means any oil compartment. This practice may also by applicable to other fluid compartments and is to supplement rather than eliminate the drain plug. (Ref. ISO TC 131/4/N27.)
CURRENT
2012-05-02
Standard
J1069_201205
This recommended practice deals with sizes, design considerations, and practices related to evacuating and refilling by positive means any oil comportment. This practice may also be applicable to other fluid compartments and is to supplement rather than eliminate the drain plug. (Ref. ISO TC 131/4/N27)
HISTORICAL
1977-06-01
Standard
J1092_197706
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2: SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations are shown in Figure 1. Illustrations of components are not intended to be exactly descriptive of any particular machine.
HISTORICAL
1985-10-01
Standard
J1092_198510
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2: SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations are shown in Figure 1. Illustrations of components are not intended to be exactly descriptive of any particular machine.
HISTORICAL
1986-06-01
Standard
J1092_198606
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2: SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations are shown in Figure 1. Illustrations of components are not intended to be exactly descriptive of any particular machine.
CURRENT
2003-05-13
Standard
J1092_200305
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2: SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations are shown in Figure 1. Illustrations of components are not intended to be exactly descriptive of any particular machine.
HISTORICAL
1993-08-01
Standard
J1092_199308
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2. SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations of components are not intended to be exactly descriptive of any particular machine.
HISTORICAL
2006-08-21
Standard
J176_200608
This SAE Standard applies to off-road self-propelled work machines as categorized in SAE J1116. A fast fueling system incorporates a fueling receiver through which fuel is conveyed to the fuel tank and an automatic shut-off vent to provide automatic fill level control, normal and emergency venting. The purpose of this document is to define the proper installation, position, protection, and size of a fueling receiver and automatic shut-off vent connections. Fast fill fueling typically applies to self-propelled machines with a fuel capacity over 380 L or as applicable on machines with less capacity.
HISTORICAL
1994-12-01
Standard
J176_199412
This SAE Standard applies to off-road self-propelled work machines as categorized in SAE J1116. A fast fueling system incorporates a fueling receiver through which fuel is conveyed to the fuel tank and an automatic shut-off vent to provide automatic fill level control, normal and emergency venting. The purpose of this document is to define the proper installation, position, protection, and size of a fueling receiver and automatic shut-off vent connections. Fast fill fueling typically applies to self-propelled machines with a fuel capacity over 380 L or as applicable on machines with less capacity.
CURRENT
2014-09-09
Standard
J176_201409
This SAE Standard applies to off-road self-propelled work machines as categorized in SAE J1116. Fast fill fueling typically applies to self-propelled machines with a fuel capacity over 380 L, although fast fill fueling can be used on machines with smaller fuel capacity.
HISTORICAL
1977-08-01
Standard
J176_197708
This SAE Standard applies to off-road self-propelled work machines as categorized in SAE J1116. A fast fueling system incorporates a fueling receiver through which fuel is conveyed to the fuel tank and an automatic shut-off vent to provide automatic fill level control, normal and emergency venting. The purpose of this document is to define the proper installation, position, protection, and size of a fueling receiver and automatic shut-off vent connections. Fast fill fueling typically applies to self-propelled machines with a fuel capacity over 380 L or as applicable on machines with less capacity.
HISTORICAL
1989-12-01
Standard
J176_198912
This SAE Standard applies to off-road self-propelled work machines as categorized in SAE J1116. A fast fueling system incorporates a fueling receiver through which fuel is conveyed to the fuel tank and an automatic shut-off vent to provide automatic fill level control, normal and emergency venting. The purpose of this document is to define the proper installation, position, protection, and size of a fueling receiver and automatic shut-off vent connections. Fast fill fueling typically applies to self-propelled machines with a fuel capacity over 380 L or as applicable on machines with less capacity.
HISTORICAL
1977-08-01
Standard
J176A_197708
This SAE Standard applies to off-road self-propelled work machines as categorized in SAE J1116. A fast fueling system incorporates a fueling receiver through which fuel is conveyed to the fuel tank and an automatic shut-off vent to provide automatic fill level control, normal and emergency venting. The purpose of this document is to define the proper installation, position, protection, and size of a fueling receiver and automatic shut-off vent connections. Fast fill fueling typically applies to self-propelled machines with a fuel capacity over 380 L or as applicable on machines with less capacity.
CURRENT
2009-04-02
Standard
J283_200904
The lift capacity can be determined by Section 4 and/or Section 5. When the results are recorded, the test method shall be identified.
2016-09-27
WIP Standard
J283
The lift capacity can be determined by Section 4 and/or Section 5. When the results are recorded, the test method shall be identified.
HISTORICAL
1978-12-01
Standard
J43_197812
The purpose of this SAE Recommended Practice is to establish a standardized method for determining maximum front and rear axle load ratings for industrial wheel loaders and backhoe loaders.
HISTORICAL
1988-02-01
Standard
J43_198802
The intent of this recommended practice is to limit declared axle load ratings. These latest editorial revisions bring this recommended practice closer to its original concept. It is intended to make this an interim document until a performance criteria document can be written. the purpose of this SAE Recommended Practice is to establish a standardized method for determining maximum front and rear axle load ratings for industrial wheel loaders and backhoe loaders.
CURRENT
2003-05-13
Standard
J43_200305
The purpose of this SAE Recommended Practice is to establish a standardized method for determining maximum front and rear axle load ratings for industrial wheel loaders and backhoe loaders.
HISTORICAL
1983-09-01
Standard
J48_198309
This SAE Recommended Practice pertains to liquid level determination for any compartment of off-road machinery as defined in SAE J1116 and J1057.
CURRENT
2017-02-08
Standard
J48_201702
This SAE Recommended Practice pertains to liquid level determination for any fluid compartment of off-road work machines as defined in SAE J1116 and ISO 6165.
Viewing 1 to 30 of 59