Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 114
HISTORICAL
1984-06-01
Standard
J1167_198406
This SAE Recommended Practice establishes test procedures and performance requirements for stop lamp switches intended for use in an AC or a DC circuit on motorcycles. In service use may impose specific conditions on the switch which can affect its functional life. Those conditions should be replicated, as necessary, during the testing described in this document to ensure the adequate functioning of the device.
HISTORICAL
2008-05-20
Standard
J1167_200805
This SAE Recommended Practice establishes test procedures and performance requirements for stop lamp switches intended for use in an AC or a DC circuit on motorcycles. In service use may impose specific conditions on the switch which can affect its functional life. Those conditions should be replicated, as necessary, during the testing described in this document to ensure the adequate functioning of the device.
HISTORICAL
1989-06-01
Standard
J1167_198906
This SAE Recommended Practice establishes test procedures and performance requirements for stop lamp switches intended for use in an AC or a DC circuit on motorcycles. In service use may impose specific conditions on the switch which can affect its functional life. Those conditions should be replicated, as necessary, during the testing described in this document to ensure the adequate functioning of the device.
HISTORICAL
1998-07-01
Standard
J1167_199807
This SAE Recommended Practice establishes test procedures and performance requirements for stop lamp switches intended for use in an AC or a DC circuit on motorcycles. In service use may impose specific conditions on the switch which can affect its functional life. Those conditions should be replicated, as necessary, during the testing described in this document to ensure the adequate functioning of the device.
HISTORICAL
1989-05-01
Standard
J1168_198905
The purpose of this SAE Recommended Practice is to specify the procedure for measuring the bank angle of motorcycles.
HISTORICAL
1977-12-01
Standard
J1167_197712
This SAE Recommended Practice establishes test procedures and performance requirements for stop lamp switches intended for use in an AC or a DC circuit on motorcycles. In service use may impose specific conditions on the switch which can affect its functional life. Those conditions should be replicated, as necessary, during the testing described in this document to ensure the adequate functioning of the device.
HISTORICAL
1977-02-01
Standard
J1168_197702
The purpose of this SAE Recommended Practice is to specify the procedure for measuring the bank angle of motorcycles.
HISTORICAL
1984-05-01
Standard
J1168_198405
The purpose of this SAE Recommended Practice is to specify the procedure for measuring the bank angle of motorcycles.
CURRENT
2014-01-06
Standard
J1167_201401
This SAE Recommended Practice defines the test conditions, procedures, and performance specifications for 6- and 12-v stop lamp switches intended for use on motorcycles.
HISTORICAL
2002-03-12
Standard
J1168_200203
The purpose of this SAE Recommended Practice is to specify the procedure for measuring the bank angle of motorcycles. This document applies to all two-wheeled motorcycles as defined in SAE J213.
HISTORICAL
2007-01-24
Standard
J1168_200701
The purpose of this SAE Recommended Practice is to specify the procedure for measuring the bank angle of motorcycles.
CURRENT
2012-03-15
Standard
J1168_201203
The purpose of this SAE Recommended Practice is to specify the procedure for measuring the bank angle of motorcycles.
HISTORICAL
2009-04-17
Standard
J1846_200904
This SAE Recommended Practice is intended for use only in characterizing test surfaces used in motorcycle side stand retraction testing (SAE J1578). The equipment and procedure described in this document yields repeatable results in characterizing test surfaces in a way found to be related to retraction performance. The test results obtained with this procedure do not necessarily correlate with measurements obtained with other friction measurement procedures which have been developed for other purposes. Purpose The purpose of this document is to establish a uniform method of characterizing the frictional characteristics of pavement test surfaces used in motorcycle side stand retraction performance testing.
CURRENT
2014-10-24
Standard
J1846_201410
This SAE Recommended Practice is intended for use only in characterizing test surfaces used in motorcycle side stand retraction testing (SAE J1578). The equipment and procedure described in this document yields repeatable results in characterizing test surfaces in a way found to be related to retraction performance. The test results obtained with this procedure do not necessarily correlate with measurements obtained with other friction measurement procedures which have been developed for other purposes.
HISTORICAL
1998-06-01
Standard
J1846_199806
This SAE Recommended Practice is intended for use only in characterizing test surfaces used in motorcycle side stand retraction testing (SAE J1578). The equipment and procedure described in this recommended practice yields repeatable results in characterizing test surfaces in a way found to be related to retraction performance. The test results obtained with this procedure do not necessarily correlate with measurements obtained with other friction measurement procedures which have been developed for other purposes. The purpose of this document is to establish a uniform method of characterizing the frictional characteristics of pavement test surfaces used in motorcycle side stand retraction performance testing.
HISTORICAL
1989-06-01
Standard
J1846_198906
This SAE Recommended Practice is intended for use only in characterizing test surfaces used in motorcycle side stand retraction testing (SAE J1578). The equipment and procedure described in this document yields repeatable results in characterizing test surfaces in a way found to be related to retraction performance. The test results obtained with this procedure do not necessarily correlate with measurements obtained with other friction measurement procedures which have been developed for other purposes. Purpose The purpose of this document is to establish a uniform method of characterizing the frictional characteristics of pavement test surfaces used in motorcycle side stand retraction performance testing.
HISTORICAL
2003-06-24
Standard
J1846_200306
This SAE Recommended Practice is intended for use only in characterizing test surfaces used in motorcycle side stand retraction testing (SAE J1578). The equipment and procedure described in this document yields repeatable results in characterizing test surfaces in a way found to be related to retraction performance. The test results obtained with this procedure do not necessarily correlate with measurements obtained with other friction measurement procedures which have been developed for other purposes. Purpose The purpose of this document is to establish a uniform method of characterizing the frictional characteristics of pavement test surfaces used in motorcycle side stand retraction performance testing.
HISTORICAL
1996-05-01
Standard
J107_199605
This SAE Recommended Practice applies to two- and three-wheeled motorcycles intended for highway use. Vehicles commonly known as mpoeds and mini-bikes are included in this vehicle category if they are intended for highway use. This document is intended to provide guides toward standard location and operation of motorcycle controls and standard identification of displays to reduce the possibility of operator confusion.
HISTORICAL
1980-04-01
Standard
J107_198004
This SAE Recommended Practice applies to two- and three-wheeled motorcycles intended for highway use. Vehicles commonly known as mpoeds and mini-bikes are included in this vehicle category if they are intended for highway use. This document is intended to provide guides toward standard location and operation of motorcycle controls and standard identification of displays to reduce the possibility of operator confusion.
CURRENT
2012-07-02
Standard
J107_201207
This SAE Recommended Practice applies to two- and three-wheel motorcycles intended for highway use. Vehicles commonly known as mopeds and mini-bikes are included in this vehicle category if they are intended for highway use.
HISTORICAL
1969-07-01
Standard
J109_196907
This SAE Recommended Practice establishes performance requirements for the service brake systems of all classes of motorcycles intended for highway use.
HISTORICAL
1971-03-01
Standard
J109A_197103
This SAE Recommended Practice establishes performance requirements for the service brake systems of all classes of motorcycles intended for highway use.
HISTORICAL
1971-03-01
Standard
J108A_197103
This SAE Recommended Practice establishes a uniform procedure for the level road test of the brake systems of all classes of motorcycles intended for highway use.
HISTORICAL
1969-07-01
Standard
J108_196907
This SAE Recommended Practice establishes a uniform procedure for the level road test of the brake systems of all classes of motorcycles intended for highway use.
HISTORICAL
2000-01-24
Standard
J108_200001
This SAE Recommended Practice establishes a uniform procedure for the level road test of the brake systems of all classes of motorcycles intended for highway use.
HISTORICAL
2007-11-30
Standard
J108_200711
This SAE Recommended Practice establishes a uniform procedure for the level road test of the brake systems of all classes of motorcycles intended for highway use.
CURRENT
2013-12-20
Standard
J108_201312
This SAE Recommended Practice establishes a uniform procedure for the level road test of the brake systems of all classes of motorcycles intended for highway use.
CURRENT
2014-10-24
Standard
J1579_201410
These requirements define minimum recommended levels of side stand retraction performance of a new side stand/motorcycle combination when tested according to the procedures of SAE J1578.
HISTORICAL
2009-01-27
Standard
J1579_200901
These requirements define minimum recommended levels of side stand retraction performance of a new side stand/motorcycle combination when tested according to the procedures of SAE J1578. These requirements apply to any new two-wheeled motorcycle without a sidecar, equipped with a side stand, and intended for highway use. (See SAE J213). This SAE Recommended Practice is intended as a guide toward standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering use of this document.
HISTORICAL
2003-05-30
Standard
J1579_200305
These requirements define minimum recommended levels of side stand retraction performance of a new side stand/motorcycle combination when tested according to the procedures of SAE J1578. These requirements apply to any new two-wheeled motorcycle without a sidecar, equipped with a side stand, and intended for highway use. (See SAE J213). This SAE Recommended Practice is intended as a guide toward standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering use of this document.
Viewing 1 to 30 of 114