Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 70
HISTORICAL
1979-04-01
Standard
J1166A_197904
This SAE Standard sets forth the procedures to be used in measuring sound levels and determining the time weighted sound level at the operator's station(s) of specified off-road self-propelled work machines. This document applies to the following work machines which have operator stations as specified in SAE J1116: Crawler Loader Wheel Loader Dumper Tractor Scraper Grader Crawler Tractor with Dozer Wheel Tractor with Dozer Pad Foot Wheel Compactor with Dozer Backhoe Hydraulic Excavator Log Skidder Excavator and Wheel Feller-Buncher Pipelayer Roller/Compactor Trencher Sweeper The instrumentation requirements and specific work cycles for these machines are described. The method used to calculate the time weighted average sound level at the operator station(s) is specified for Leq(5), or optional exchange rates, during continuous operation in a work cycle. A method to relate the time weighted average sound level at the operator station(s) to operator sound exposure is also provided.
HISTORICAL
1976-12-01
Standard
J1166_197612
This SAE Standard sets forth the procedures to be used in measuring sound levels and determining the time weighted sound level at the operator's station(s) of specified off-road self-propelled work machines. This document applies to the following work machines which have operator stations as specified in SAE J1116: Crawler Loader Wheel Loader Dumper Tractor Scraper Grader Crawler Tractor with Dozer Wheel Tractor with Dozer Pad Foot Wheel Compactor with Dozer Backhoe Hydraulic Excavator Log Skidder Excavator and Wheel Feller-Buncher Pipelayer Roller/Compactor Trencher Sweeper The instrumentation requirements and specific work cycles for these machines are described. The method used to calculate the time weighted average sound level at the operator station(s) is specified for Leq(5), or optional exchange rates, during continuous operation in a work cycle. A method to relate the time weighted average sound level at the operator station(s) to operator sound exposure is also provided.
HISTORICAL
1987-07-01
Standard
J1166_198707
This SAE Standard sets forth the procedures to be used in measuring sound levels and determining the time weighted sound level at the operator's station(s) of specified off-road self-propelled work machines. This document applies to the following work machines which have operator stations as specified in SAE J1116: Crawler Loader Wheel Loader Dumper Tractor Scraper Grader Crawler Tractor with Dozer Wheel Tractor with Dozer Pad Foot Wheel Compactor with Dozer Backhoe Hydraulic Excavator Log Skidder Excavator and Wheel Feller-Buncher Pipelayer Roller/Compactor Trencher Sweeper The instrumentation requirements and specific work cycles for these machines are described. The method used to calculate the time weighted average sound level at the operator station(s) is specified for Leq(5), or optional exchange rates, during continuous operation in a work cycle. A method to relate the time weighted average sound level at the operator station(s) to operator sound exposure is also provided.
HISTORICAL
1987-02-01
Standard
J1166_198702
This SAE Standard sets forth the procedures to be used in measuring sound levels and determining the time weighted sound level at the operator's station(s) of specified off-road self-propelled work machines. This document applies to the following work machines which have operator stations as specified in SAE J1116: Crawler Loader Wheel Loader Dumper Tractor Scraper Grader Crawler Tractor with Dozer Wheel Tractor with Dozer Pad Foot Wheel Compactor with Dozer Backhoe Hydraulic Excavator Log Skidder Excavator and Wheel Feller-Buncher Pipelayer Roller/Compactor Trencher Sweeper The instrumentation requirements and specific work cycles for these machines are described. The method used to calculate the time weighted average sound level at the operator station(s) is specified for Leq(5), or optional exchange rates, during continuous operation in a work cycle. A method to relate the time weighted average sound level at the operator station(s) to operator sound exposure is also provided.
HISTORICAL
1986-06-01
Standard
J1166_198606
This SAE Standard sets forth the procedures to be used in measuring sound levels and determining the time weighted sound level at the operator's station(s) of specified off-road self-propelled work machines. This document applies to the following work machines which have operator stations as specified in SAE J1116: Crawler Loader Wheel Loader Dumper Tractor Scraper Grader Crawler Tractor with Dozer Wheel Tractor with Dozer Pad Foot Wheel Compactor with Dozer Backhoe Hydraulic Excavator Log Skidder Excavator and Wheel Feller-Buncher Pipelayer Roller/Compactor Trencher Sweeper The instrumentation requirements and specific work cycles for these machines are described. The method used to calculate the time weighted average sound level at the operator station(s) is specified for Leq(5), or optional exchange rates, during continuous operation in a work cycle. A method to relate the time weighted average sound level at the operator station(s) to operator sound exposure is also provided.
CURRENT
2014-09-18
Standard
J1166_201409
This SAE Standard sets forth the procedures to be used in measuring sound levels and determining the time weighted sound level at the operator's station(s) of specified off-road self-propelled work machines. This document applies to the following work machines which have operator stations as specified in SAE J1116: The instrumentation requirements and specific work cycles for these machines are described. The method used to calculate the time weighted average sound level at the operator station(s) is specified for Leq(5), or optional exchange rates, during continuous operation in a work cycle representing continuous medium to heavy work. The work cycles provide a repeatable reproduceable means to uniformly measure working machines against a “yard stick. A method to relate the time weighted average sound level at the operator station(s) to estimate operator sound exposure with part load work, supervision, and rest breaks is also provided.
HISTORICAL
2008-02-06
Standard
J1166_200802
This SAE Standard sets forth the procedures to be used in measuring sound levels and determining the time weighted sound level at the operator's station(s) of specified off-road self-propelled work machines. This document applies to the following work machines which have operator stations as specified in SAE J1116: Crawler Loader Wheel Loader Dumper Tractor Scraper Grader Crawler Tractor with Dozer Wheel Tractor with Dozer Pad Foot Wheel Compactor with Dozer Backhoe Hydraulic Excavator Log Skidder Excavator and Wheel Feller-Buncher Pipelayer Roller/Compactor Trencher Sweeper The instrumentation requirements and specific work cycles for these machines are described. The method used to calculate the time weighted average sound level at the operator station(s) is specified for Leq(5), or optional exchange rates, during continuous operation in a work cycle. A method to relate the time weighted average sound level at the operator station(s) to operator sound exposure is also provided.
CURRENT
1999-06-01
Standard
J1741_199906
This SAE Standard describes methods for evaluating the performance of the systems detection device, the minimum detection areas behind the machine, the visual and audible information presented to the operator and ground personnel, and the systems fault detection requirements. Also included are operator system function tests and maintenance procedures.
HISTORICAL
2007-01-30
Standard
J1029_200701
This SAE Standard establishes minimum requirements for lighting and marking earthmoving construction machinery as defined in SAE J1116, 1.1 Self-Propelled Construction Machines - Earthmoving (excluding excavators). (Construction machinery is normally operated off-highway, and therefore this SAE document is not intended to be used as a basis for regulations by those having authority over on-highway motor vehicles.)
CURRENT
2012-10-09
Standard
J1029_201210
This SAE Standard establishes minimum requirements for lighting and marking earthmoving construction machinery as defined in SAE J1116, 1.1 Self-Propelled Construction Machines—Earthmoving (excluding excavators). (Construction machinery is normally operated off-highway, and therefore this SAE document is not intended to be used as a basis for regulations by those having authority over on-highway motor vehicles.)
HISTORICAL
1996-09-01
Standard
J1029_199609
This SAE Standard establishes minimum requirements for lighting and marking earthmoving construction machinery as defined in SAE J1116, 1.1 Self-Propelled Construction Machines—Earthmoving (excluding excavators). (Construction machinery is normally operated off-highway, and therefore this SAE document is not intended to be used as a basis for regulations by those having authority over on-highway motor vehicles.)
HISTORICAL
1986-03-01
Standard
J1029_198603
This SAE Standard establishes minimum requirements for lighting and marking earthmoving construction machinery as defined in SAE J1116, 1.1 Self-Propelled Construction Machines - Earthmoving (excluding excavators). (Construction machinery is normally operated off-highway, and therefore this SAE document is not intended to be used as a basis for regulations by those having authority over on-highway motor vehicles.)
HISTORICAL
1978-04-01
Standard
J1075_197804
This SAE Standard sets forth measurement procedures and instrumentation to be used for determining a "representative" sound level during a representative time period at selected measurement locations on a construction site boundary. The document is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgment of the user.
HISTORICAL
1985-08-01
Standard
J1075_198508
This SAE Standard sets forth measurement procedures and instrumentation to be used for determining a "representative" sound level during a representative time period at selected measurement locations on a construction site boundary. The document is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgment of the user.
HISTORICAL
1985-04-01
Standard
J1075_198504
This SAE Standard sets forth measurement procedures and instrumentation to be used for determining a "representative" sound level during a representative time period at selected measurement locations on a construction site boundary. The document is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgment of the user.
HISTORICAL
1987-03-01
Standard
J1075_198703
This SAE Standard sets forth measurement procedures and instrumentation to be used for determining a "representative" sound level during a representative time period at selected measurement locations on a construction site boundary. The document is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgment of the user.
HISTORICAL
2007-11-09
Standard
J1075_200711
This SAE Standard sets forth measurement procedures and instrumentation to be used for determining a "representative" sound level during a representative time period at selected measurement locations on a construction site boundary. The document is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgment of the user.
CURRENT
2013-03-19
Standard
J1075_201303
This SAE Standard sets forth measurement procedures and instrumentation to be used for determining a “representative” sound level during a representative time period at selected measurement locations on a construction site boundary. The document is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgment of the user.
HISTORICAL
1975-05-01
Standard
J1105_197505
This document establishes the following criteria for electrically operated forward warning horns on mobile construction machinery: (a) Forward warning horn performance requirements; (b) Measurement technique for horn performance requirements; (c) Laboratory environmental tests; and (d) Horn activation on the vehicle.
2013-04-30
WIP Standard
J1105
This document establishes the following criteria for electrically operated forward warning horns on mobile construction machinery: (a) Forward warning horn performance requirements; (b) Measurement technique for horn performance requirements; (c) Laboratory environmental tests; and (d) Horn activation on the vehicle.
2008-12-04
WIP Standard
J1741
This SAE Standard describes methods for evaluating the performance of the systems detection device, the minimum detection areas behind the machine, the visual and audible information presented to the operator and ground personnel, and the systems fault detection requirements. Also included are operator system function tests and maintenance procedures. The purpose of this document is to establish performance requirements for a Discriminating Back-Up Alarm System.
2009-03-30
WIP Standard
J2895
This SAE Standard provide general design performance requirements and related test procedures for LED "white" lighting assemblies, other than signaling and marking devices used on Earthmoving, Road Building and Maintenance off-road work machines
HISTORICAL
2004-05-06
Standard
J572_200405
This SAE Standard applies to 145 mm nominal headlamp and floodlamp units.
HISTORICAL
1998-12-23
Standard
J572_199812
This SAE Standard applies to 145 mm nominal headlamp and floodlamp units.
CURRENT
2011-10-27
Standard
J572_201110
This SAE Standard applies to 145 mm nominal headlamp and floodlamp units.
HISTORICAL
1993-05-01
Standard
J572_199305
This standard applies to 145mm (5-3/4 in) nominal headlamp and floodlamp units. To define the dimensional requirements for sealed lighting their interchangeability.
HISTORICAL
1980-04-01
Standard
J598_198004
This SAE Recommended Practice applies to floodlamp, headlamp, and general service lamp units intended for use on off-road self-propelled work machines classified as construction, general purpose industrial and forestry machines, as noted in SAE J1116. Construction and industrial machinery is normally operated off highways, therefore, this document is not intended to be used as a basis for regulations by those having authority over motor vehicles used on public highways. Other performance and dimensional information is contained in SAE J572 and J760.
HISTORICAL
1987-05-01
Standard
J598_198705
This SAE Recommended Practice applies to floodlamp, headlamp, and general service lamp units intended for use on off-road self-propelled work machines classified as construction, general purpose industrial and forestry machines, as noted in SAE J1116. Construction and industrial machinery is normally operated off highways, therefore, this document is not intended to be used as a basis for regulations by those having authority over motor vehicles used on public highways. Other performance and dimensional information is contained in SAE J572 and J760.
HISTORICAL
1994-06-01
Standard
J598_199406
This SAE Recommended Practice applies to floodlamp, headlamp, and general service lamp units intended for use on off-road self-propelled work machines classified as construction, general purpose industrial and forestry machines, as noted in SAE J1116. Construction and industrial machinery is normally operated off highways, therefore, this document is not intended to be used as a basis for regulations by those having authority over motor vehicles used on public highways. Other performance and dimensional information is contained in SAE J572 and J760.
CURRENT
1998-12-12
Standard
J598_199812
This SAE Recommended Practice applies to floodlamp, headlamp, and general service lamp units intended for use on off-road self-propelled work machines classified as construction, general purpose industrial and forestry machines, as noted in SAE J1116. Construction and industrial machinery is normally operated off highways, therefore, this document is not intended to be used as a basis for regulations by those having authority over motor vehicles used on public highways. Other performance and dimensional information is contained in SAE J572 and J760.
Viewing 1 to 30 of 70