Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 172
HISTORICAL
1992-03-01
Standard
J1885_199203
This test method specifies the operating procedures for a controlled irradiance, water cooled xenon arc apparatus used for the accelerated exposure of various automotive interior trim components. Test durations, as well as any exceptions to the sample preparation and performance evaluation procedures contained in this document, are covered in material specifications of the different automotive manufacturers.
CURRENT
2008-01-11
Standard
J1885_200801
This test method specifies the operating procedures for a controlled irradiance, water cooled xenon-arc apparatus used for the accelerated exposure of various automotive interior trim components. Test durations, as well as any exceptions to the sample preparation and performance evaluation procedures contained in this document, are covered in material specifications of the different automotive manufacturers. This standard is limited to the models of xenon arc test apparatus specified in the Section on Equipment. All other models of xenon arc test apparatus must use SAE J2412 to perform the test conditions specified in SAE J1885. SAE J2412 is the performance standard based on the test parameters of SAE J1885. Use of xenon arc test apparatus to perform SAE J2412 must be agreed upon by contractual parties.
HISTORICAL
2005-03-09
Standard
J1885_200503
This test method specifies the operating procedures for a controlled irradiance, water cooled xenon arc apparatus used for the accelerated exposure of various automotive interior trim components. Test durations, as well as any exceptions to the sample preparation and performance evaluation procedures contained in this document, are covered in material specifications of the different automotive manufacturers.
HISTORICAL
1987-08-01
Standard
J1885_198708
This test method specifies the operating procedures for a controlled irradiance, water cooled xenon arc apparatus used for the accelerated exposure of various automotive interior trim components. Test durations, as well as any exceptions to the sample preparation and performance evaluation procedures contained in this document, are covered in material specifications of the different automotive manufacturers.
CURRENT
2006-08-08
Standard
J1756_200608
This recommended practice describes two methods for determining the tendency of interior materials used in automobiles and other vehicles to (a) produce a light scattering deposit (fog) on a glass surface, or (b) produce a measurable deposit (mass) on aluminum foil.
HISTORICAL
1994-12-01
Standard
J1756_199412
This procedure describes two methods for determining the tendency of interior materials used in automobiles and other vehicles to (a) produce a light scattering film (fog) on a glass surface, or (b) produce a measurable deposit (mass) on aluminum foil. These procedures are applicable to the measurement of a fog condensate on glass or aluminum foil surfaces within the limits of the test conditions. It is the responsibility of the user of this test procedure to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to its use.
2013-12-06
WIP Standard
J1756
1.1 This recommended practice describes two methods for determining the tendency of interior materials used in automobiles and other vehicles to (a) produce a light scattering deposit (fog) on a glass surface, or (b) produce a measurable deposit (mass) on aluminum foil. 1.2 This document is applicable to the measurement of a fog condensate on glass or aluminum foil surfaces within the limits of the test conditions. 1.3 It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to its use.
CURRENT
2014-01-06
Standard
J1767_201401
The practice described applies to textile and flexible plastic parts and materials used in automotive vehicles. Special care should be taken when high pile carpet samples are being evaluated.
HISTORICAL
1995-01-01
Standard
J1767_199501
The practice described applies to textile and flexible plastic parts and materials used in automotive vehicles. Special care should be taken when high pile carpet samples are being evaluated. The intent of this SAE Recommended Practice is to specify procedures for the instrumental measurement of color differences brought about by the exposure of textile and flexible plastic automotive parts to various colorfastness tests. It may be used for the specification of limits of color differences which may be tolerated in a specific test.
CURRENT
2010-06-21
Standard
J1774_201006
This document provides information on the various fiberboard products, which are available for automotive application. It is intended to give engineers and designers a better understanding of product usage, characteristics, properties and industry terminology. The following sections cover these topics: General Product Information Design Characteristics Physical/Mechanical Properties Fiberboard Definitions In sections 2, 3 and 4 the fiberboard products are categorized. These sections give an overview of product types, with general information about characteristics and properties. In cases where product categories encompass more than one material or material grade, ranges were established to cover all of the products in that category. The individual companies that supply fiberboard products should be consulted for specific information about a particular product or application.
HISTORICAL
2004-08-04
Standard
J1774_200408
This document provides information on the various fiberboard products, which are available for automotive application. It is intended to give engineers and designers a better understanding of product usage, characteristics, properties and industry terminology. The following sections cover these topics: 2. General Product Information 3. Design Characteristics 4. Physical/Mechanical Properties 5. Fiberboard Definitions In sections 2, 3 and 4 the fiberboard products are categorized. These sections give an overview of product types, with general information about characteristics and properties. In cases where product categories encompass more than one material or material grade, ranges were established to cover all of the products in that category. The individual companies that supply fiberboard products should be consulted for specific information about a particular product or application.
HISTORICAL
2005-07-25
Standard
J1545_200507
The practice applies to parts and materials used in vehicle manufacture which are intended to be acceptable color matches to a specified color standard. This practice is intended for use with parts or materials that are opaque or nearly so and does not apply to transparent materials. Materials covered by this practice include topcoat paint finishes, interior soft trim, interior and exterior hard trim, and exterior film.
CURRENT
2014-10-27
Standard
J1545_201410
The practice applies to parts and materials used in vehicle manufacture which are intended to be acceptable color matches to a specified color standard. This practice is intended for use with parts or materials that are opaque or nearly so and does not apply to transparent materials. Materials covered by this practice include topcoat paint finishes, interior soft trim, interior and exterior hard trim, and exterior film.
HISTORICAL
1986-06-01
Standard
J1545_198606
The intent of this practice is to precisely specify procedures for instrumental color difference measurement of colored parts or colored materials incorporated in the manufacture of vehicles. The recommended practice provides a consistent engineering practice for determination of color difference, for numerical communication of color difference, and for determination of acceptance or rejection compared to numerical tolerances. The practice is intended to be used as a specification and means of communication for color part acceptance in a buyer-seller agreement. The practice applies to parts and materials used in vehicles manufacture which are intended to be acceptable color matches to a specified color standard. This practice is intended for use with parts or materials which are opaque or nearly so and does not apply to transparent materials. Materials covered by this practice include topcoat paint finishes, interior soft trim, and exterior hard trim, and exterior film.
HISTORICAL
2011-05-26
Standard
J1530_201105
This test method covers determination of abrasion resistance, fiber loss and bearding resistance of automotive carpet materials.
HISTORICAL
2003-11-06
Standard
J1530_200311
This test method covers determination of abrasion resistance, fiber loss and bearding resistance of automotive carpet materials.
HISTORICAL
2008-05-02
Standard
J1531_200805
This procedure is used to determine seam strength and seam fatigue of automotive textiles, vinyl coated fabrics and related soft trim materials.
CURRENT
2017-02-13
Standard
J1530_201702
This test method covers determination of abrasion resistance, fiber loss and bearding resistance of automotive carpet materials.
HISTORICAL
1994-08-01
Standard
J1530_199408
This SAE Recommended Practice contains a test method for determining abrasion resistance, two methods for determining fiber loss, and a method for bearding resistance useful for evaluating automotive carpet materials.
HISTORICAL
1985-06-01
Standard
J1530_198506
This test method covers determination of abrasion resistance, fiber loss and bearding resistance of automotive carpet materials.
CURRENT
2014-05-20
Standard
J1531_201405
This procedure is used to determine seam strength and seam fatigue of automotive textiles, vinyl coated fabrics and related soft trim materials.
CURRENT
2014-06-04
Standard
J1323_201406
This SAE Standard provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947. The test methods commonly used for fiberboards are defined in SAE J315.
HISTORICAL
1983-06-01
Standard
J1323_198306
This SAE Standard provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947. the test methods commonly used for fiberboards are defined in SAE J315.
HISTORICAL
2003-12-11
Standard
J1323_200312
This SAE Standard provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947. the test methods commonly used for fiberboards are defined in SAE J315.
HISTORICAL
2009-05-22
Standard
J1323_200905
This SAE Standard provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947. the test methods commonly used for fiberboards are defined in SAE J315.
HISTORICAL
1980-08-01
Standard
J1323_198008
This SAE Standard provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947. the test methods commonly used for fiberboards are defined in SAE J315.
HISTORICAL
1990-09-01
Standard
J1323_199009
This SAE Standard provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947. the test methods commonly used for fiberboards are defined in SAE J315. The purpose of this classification system is to provide guidance to the engineer in the selection of commercially available fiberboards and further provide a method for specifying the fiberboard and its critical properties by use of a standard line call-out.
CURRENT
2009-03-04
Standard
J1326_200903
This procedure describes a method of measuring the resistance to wet color transfer of materials such as textiles, leather and composites.
2013-12-06
WIP Standard
J1326
This procedure describes a method of measuring the resistance to wet color transfer of dyed, printed, or otherwise colored textile yarns and composites thereof. The purpose of this testing method is to establish a means of ranking the relative resistance to wet staining of composites which contain dyed or colored textile fibers.
HISTORICAL
1985-02-01
Standard
J1326_198502
This procedure describes a method of measuring the resistance to wet color transfer of dyed, printed, or otherwise colored textile yarns and composites thereof. The purpose of this testing method is to establish a means of ranking the relative resistance to wet staining of composites which contain dyed or colored textile fibers.
Viewing 1 to 30 of 172