Refine Your Search

Date

Date

Topic

Topic

Commercial Vehicle Cleaning Standard Casting

Search Results

Viewing 1 to 20 of 27
12Next >Last >>
Sort by relevance
Standard

Cutting Edge - Optional Cross-Sections and Dimensions Loader Straight
2011-10-25
CURRENT
J1581_201110
The purpose of this SAE Recommended Practice is to specify dimensions for loader straight cutting edge cross sections without holes and with bolt holes for mounting bolt-on teeth and tooth adaptors on loader buckets described by SAE J731. This recommended practice is intended to supplement SAE J1303 and SAE J1304 with cross sections for heavier duty applications, by identifying larger blunts, greater bevel angles, larger bolt holes, and greater bolt spacing.
Standard

Fastener Part Standard - Tapping Screws and Metallic Drive Screws (Inch Dimensioned)
2013-08-21
CURRENT
J2596_201308
This SAE Part Standard covers selected inch dimensioned tapping screws and metallic drive screws manufactured in accordance with American Society for Mechanical Engineers dimensional standards. This SAE standard covers material most often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This standard permits the fasteners to be identified and ordered by a Part Identification Number (PIN) as defined in this standard.
Standard

SELF-PROPELLED SWEEPERS AND CLEANING EQUIPMENT
1997-10-01
HISTORICAL
J2130_199710
This SAE Standard applies to all self-propelled machines that are designed to clean material from highways, parking lots, and floors in non-residential buildings. Primary methods for removing material can be by mechanical means, pneumatic, washing system, or a combination.
Standard

Cutting Edge - Cross Sections Loader Straight
2011-10-25
CURRENT
J1303_201110
For cutting edges used on buckets for loaders defined in SAE J1057a. The dimensions are applicable to rolled, cast, forged, flame cut, and machined cutting edge sections. Straight cutting edges are defined as those whose leading edge and rear edge are parallel and, thus, are of constant cross section. For "straight cutting edge sections with bolt holes," see SAE J1304 FEB85. NOTE—For some heavy duty applications, cross sections with larger blunts and greater bevel angles may be required.
Standard

Cutting Edge—Double Bevel Cross Sections
2008-07-07
HISTORICAL
J738_200807
This standard is for cutting edge sections typically used in earthmoving machinery defined in SAE J1507: a Tractor - Scrapers as defined in SAE J728. b Dozers as described in SAE J729 and J173. c Loaders as described in SAE J731. d Graders as described in SAE J870. Hole spacing is defined for dozers and scrapers in J737 and graders in J739. Hole conformation is defined in J740.
Standard

Cutting Edge - Double Bevel Cross Sections
2014-01-08
HISTORICAL
J738_201401
This standard is for cutting edge sections typically used in earth-moving machinery defined in SAE J1116 and ISO 6165: a Scrapers as defined in ISO 7133. b Dozers as described in ISO 6747. c Loaders as described in ISO 7131. d Graders as described in ISO 7134. Hole spacing is defined ISO 7129. Hole conformation is defined in SAE J740.
Standard

CUTTING EDGE—DOUBLE BEVEL CROSS SECTIONS
1986-06-01
HISTORICAL
J738_198606
This standard is for cutting edge sections typically used in earthmoving machinery defined in SAE J1507: a Tractor - Scrapers as defined in SAE J728. b Dozers as described in SAE J729 and J173. c Loaders as described in SAE J731. d Graders as described in SAE J870. Hole spacing is defined for dozers and scrapers in J737 and graders in J739. Hole conformation is defined in J740.
Standard

Power Cable Terminals
2007-11-16
HISTORICAL
J1811_200711
This SAE Standard is intended for light and heavy-duty on-highway trucks and their trailers; and off-road machinery applications as described in SAE J1116. The terminals described in this document are primarily used to connect batteries, cranking motors, solenoids, magnetic switches, and master disconnect switches and power cable assemblies.
Standard

Power Cable Terminals
2002-10-31
HISTORICAL
J1811_200210
This SAE Standard is intended for light and heavy-duty on-highway trucks and their trailers; and off-road machinery applications as described in SAE J1116. The terminals described in this document are primarily used to connect batteries, cranking motors, solenoids, magnetic switches, and master disconnect switches and power cable assemblies.
Standard

Power Cable Terminals
2013-01-18
CURRENT
J1811_201301
This SAE Standard is intended for light and heavy-duty on-highway trucks and their trailers; and off- road machinery applications as described in SAE J1116. The terminals described in this document are primarily used to connect batteries, cranking motors, solenoids, magnetic switches, and master disconnect switches and power cable assemblies.
Standard

Identification of Self-Propelled Sweepers and Cleaning Equipment Part 2 - Machines with a Gross Vehicle Mass up to 5000 kg
2021-06-02
CURRENT
J2130/2_202106
This SAE Standard applies to all self-propelled machines with a gross vehicle mass up to 5000 kg that are utilized to clean material from outside paved areas, parkland, floors in non-residential buildings and areas principally exposed to pedestrian traffic. Primary methods for material removal can be by mechanical, pneumatic, washing and flushing systems, or in a combination of any system.
Standard

Identification of Self-Propelled Sweepers and Cleaning Equipment Part 2 - Machines with a Gross Vehicle Mass Up to 5000 kg
2015-03-27
HISTORICAL
J2130/2_201503
This SAE Standard applies to all self-propelled machines with a gross vehicle mass up to 5000 kg that are utilized to clean material from outside paved areas, parkland, floors in non-residential buildings and areas principally exposed to pedestrian traffic. Primary methods for material removal can be by mechanical, pneumatic, washing and flushing systems, or in a combination of any system.
Standard

Identification of Self-Propelled Sweepers and Cleaning Equipment Part 1 - Machines with a Gross Vehicle Mass Greater than 5000 kg
2021-07-20
CURRENT
J2130/1_202107
This SAE Standard applies to all self-propelled machines with a gross vehicle mass greater than 5000 kg that are utilized to clean material from highways, parking lots, airfield runways, outside paved areas that are principally exposed to vehicular traffic. These machines can also be involved with road construction or repaving work. Primary methods for material removal and cleaning can be by mechanical, pneumatic, washing and flushing systems, or in a combination of any system.
Standard

Identification of Self-Propelled Sweepers and Cleaning Equipment Part 1 - Machines with a Gross Vehicle Mass Greater than 5000 kg
2015-03-27
HISTORICAL
J2130/1_201503
This SAE Standard applies to all self-propelled machines with a gross vehicle mass greater than 5000 kg that are utilized to clean material from highways, parking lots, airfield runways, outside paved areas that are principally exposed to vehicular traffic. These machines can also be involved with road construction or repaving work. Primary methods for material removal and cleaning can be by mechanical, pneumatic, washing and flushing systems, or in a combination of any system.
12Next >Last >>
X