Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 540
CURRENT
1997-03-01
Standard
AIR1936A
This study addresses the adequacy of sockets, wrenches, and torque adapters conforming to AS954 to wrench 12 point fasteners with wrenching configurations conforming to AS870C. Reported wrenching problems with smaller sizes are investigated through examining the combined tolerances on the fasteners and wrenches, conducting torque testing on typical high strength lock nuts. Possible solutions to correct these wrenching problems are presented.
HISTORICAL
1985-03-01
Standard
AIR1936
This study addresses the adequacy of sockets, wrenches, and torque adapters conforming to AS954 to wrench 12 point fasteners with wrenching configurations conforming to AS870C. Reported wrenching problems with smaller sizes are investigated through examining the combined tolerances on the fasteners and wrenches, conducting torque testing on typical high strength lock nuts. Possible solutions to correct these wrenching problems are presented.
CURRENT
2003-05-15
Standard
AIR1268
This report covers torque indicating and limiting devices, also referred to as torque wrenches or torque handles, accessories used to obtain predetermined torque values on nuts, bolts, plumbing, related fasteners and friction of rotating parts, etc; calibration equipment and recommended schedules; proper use of tools and chronic torque problems.
CURRENT
1993-01-01
Standard
AMS3510B
This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of October 1995.
HISTORICAL
1993-01-01
Standard
AMS3510A
HISTORICAL
1995-10-01
Standard
AMS3510
HISTORICAL
2002-09-04
Standard
AMS2426D
This specification covers the engineering requirements for vacuum deposition of cadmium and the properties of the deposit.
CURRENT
2013-09-26
Standard
AMS2426E
This specification covers the requirements for vacuum deposited cadmium.
HISTORICAL
1966-09-01
Standard
AMS2426
This specification covers the engineering requirements for vacuum deposition of cadmium and the properties of the deposit.
HISTORICAL
1979-10-01
Standard
AMS2426A
This specification covers the engineering requirements for vacuum deposition of cadmium and the properties of the deposit.
HISTORICAL
1991-10-01
Standard
AMS2426B
This specification covers the engineering requirements for vacuum deposition of cadmium and the properties of the deposit.
HISTORICAL
1995-05-01
Standard
AMS2426C
This specification covers the engineering requirements for vacuum deposition of cadmium and the properties of the deposit.
CURRENT
2014-11-13
Standard
AMS2472G
This specification establishes the requirements for dyed anodic coatings on aluminum alloys.
HISTORICAL
1976-01-15
Standard
AMS2468B
This specification establishes the engineering requirements for producing a hard coating on aluminum alloys and the properties of such coating. This coating has been used typically to increase, by the formation of a dense aluminum oxide, surface hardness and resistance to abrasion and corrosion of aluminum-alloy parts containing, in general, less than 6% copper or 8% silicon or a total of 8% of both, but usage is not limited to such applications. Alloys with higher silicon content alone can be coated satisfactorily with proper precautions in processing. Careful consideration should be given to the use of this process on highly-stressed parts because of the resultant marked lowering of fatigue performance and on parts with sharp corners and edges where chipping may result.
HISTORICAL
1980-01-15
Standard
AMS2468C
This specification establishes the engineering requirements for producing a hard coating on aluminum alloys and the properties of such coating. This coating has been used typically to increase, by the formation of a dense aluminum oxide, surface hardness and resistance to abrasion and corrosion of aluminum-alloy parts containing, in general, less than 6% copper or 8% silicon or a total of 8% of both, but usage is not limited to such applications. Alloys with higher silicon content alone can be coated satisfactorily with proper precautions in processing. Careful consideration should be given to the use of this process on highly-stressed parts because of the resultant marked lowering of fatigue performance and on parts with sharp corners and edges where chipping may result.
HISTORICAL
1986-04-01
Standard
AMS2468D
This specification establishes the engineering requirements for producing a hard coating on aluminum alloys and the properties of such coating. This coating has been used typically to increase, by the formation of a dense aluminum oxide, surface hardness and resistance to abrasion and corrosion of aluminum-alloy parts containing, in general, less than 6% copper or 8% silicon or a total of 8% of both, but usage is not limited to such applications. Alloys with higher silicon content alone can be coated satisfactorily with proper precautions in processing. Careful consideration should be given to the use of this process on highly-stressed parts because of the resultant marked lowering of fatigue performance and on parts with sharp corners and edges where chipping may result.
HISTORICAL
1998-10-01
Standard
AMS2468F
This specification establishes the engineering requirements for producing a hard coating on aluminum alloys and the properties of such coating.
CURRENT
1999-09-01
Standard
AMS2468G
This specification establishes the engineering requirements for producing a hard coating on aluminum alloys and the properties of such coating.
HISTORICAL
2009-03-23
Standard
AMS2466B
This specification covers the requirements for a hard anodic coating on magnesium alloys.
HISTORICAL
1983-10-01
Standard
AMS2465B
This specification covers the procedure for applying a disilicide diffusion coating to molybdenum and molybdenum alloy parts by the pack cementation method and the properties of the coating so deposited.
HISTORICAL
2005-02-11
Standard
AMS2465C
This specification covers the procedure for applying a disilicide diffusion coating to molybdenum and molybdenum alloy parts by the pack cementation method and the properties of the coating so deposited.
HISTORICAL
1963-07-01
Standard
AMS2465
This specification covers the procedure for applying a disilicide diffusion coating to molybdenum alloy parts by the pack cementation method and the properties of the coating so deposited.
HISTORICAL
1974-12-01
Standard
AMS2465A
This specification covers the procedure for applying a disilicide diffusion coating to molybdenum and molybdenum alloy parts by the pack cementation method and the properties of the coating so deposited.
HISTORICAL
1957-01-15
Standard
AMS2468
This specification establishes the engineering requirements for producing a hard coating on aluminum alloys and the properties of such coating. This coating has been used typically to increase, by the formation of a dense aluminum oxide, surface hardness and resistance to abrasion and corrosion of aluminum-alloy parts containing, in general, less than 6% copper or 8% silicon or a total of 8% of both, but usage is not limited to such applications. Alloys with higher silicon content alone can be coated satisfactorily with proper precautions in processing. Careful consideration should be given to the use of this process on highly-stressed parts because of the resultant marked lowering of fatigue performance and on parts with sharp corners and edges where chipping may result.
HISTORICAL
1964-06-30
Standard
AMS2468A
This specification establishes the engineering requirements for producing a hard coating on aluminum alloys and the properties of such coating. This coating has been used typically to increase, by the formation of a dense aluminum oxide, surface hardness and resistance to abrasion and corrosion of aluminum-alloy parts containing, in general, less than 6% copper or 8% silicon or a total of 8% of both, but usage is not limited to such applications. Alloys with higher silicon content alone can be coated satisfactorily with proper precautions in processing. Careful consideration should be given to the use of this process on highly-stressed parts because of the resultant marked lowering of fatigue performance and on parts with sharp corners and edges where chipping may result.
CURRENT
2018-01-02
Standard
AMS2466C
This specification covers the requirements for a hard anodic coating on magnesium alloys.
HISTORICAL
1997-09-01
Standard
AMS2466
This specification establishes the procedures used to produce a hard anodic coating on magnesium alloys and the properties of the coating.
HISTORICAL
2003-06-16
Standard
AMS2466A
This specification covers the requirements for a hard anodic coating on magnesium alloys.
CURRENT
2017-04-20
Standard
AMS2465D
This specification covers the procedure for applying a disilicide diffusion coating to molybdenum and molybdenum alloy parts by the pack cementation method and the properties of the coating so deposited.
HISTORICAL
2017-03-17
Standard
AMS2451/4C
This specification establishes the requirements for brush plating of cadmium by electrodeposition.
Viewing 1 to 30 of 540

Filter

  • Standard
    540
  • Range:
    to:
  • Year: