Criteria

Text:
Content:
Topic:
Display:

Results

Viewing 1 to 30 of 1303
CURRENT
2004-11-24
Standard
AIR5693
The scope of this document is limited to the compatibility of typical fluids that may come in contact with PTFE hose assemblies. PTFE hose assemblies may be braided with CRES wire, polyester or para-aramid fibers. Hose assemblies may be equipped with aluminum, CRES, titanium or nickel alloy fittings; and with fire resistant cover materials. All of these constituent materials of PTFE hose assemblies must be compatible with all of the fluids found in any particular application.
CURRENT
1993-03-01
Standard
AIR1973A
This index of trademarks of current and former manufacturers of aerospace fittings, couplings, hose, and tube support devices is within the scope of activities of the SAE G-3 Committee and available at the time of publication. Suggestions for additional entries may be sent to the SAE in Warrendale, PA.
HISTORICAL
1987-01-01
Standard
AIR1973
Listings are current and former manufacturers of aerospace fittings, couplings, hose and tube support devices that are within the scope of activities of the SAE G-3 Committee and available at the time of publication. Suggestions for additional listings may be sent to the SAE in Warrendale, PA.
HISTORICAL
1980-12-01
Standard
AIR1698
CURRENT
2002-11-13
Standard
AIR5386
This SAE Aerospace Information Report (AIR) applies as general guidance to users of all hose and hose assembly types used in aerospace applications. See 6.4 for similar guidance for non-aerospace applications.
CURRENT
1996-10-01
Standard
AIR4092A
To provide information regarding a unique failure mode and alternate solutions for consideration by application designers.
HISTORICAL
1972-11-01
Standard
AIR1228
This SAE Aerospace Information Report (AIR) establishes the part numbers and/or description of the critical components and operational guidelines for the standard hydraulic impulse machine for testing hydraulic hose assemblies, tubing, coils, and fittings and may be used for similar fluid system components, if desired. The standard impulse machine is established for the following purposes: As referee in the event of conflicting data from two or more nonstandard impulse machines. Such a referee machine might be built by an impartial testing activity. A design guide for future machines being built by manufacturers and users, or the upgrading of present machines. A design guide for higher pressure machines or special purpose machines being designed. It is not the intention of this document to obsolete present machines.
CURRENT
2009-01-07
Standard
AIR1228A
This SAE Aerospace Information Report (AIR) establishes the specifications and descriptions of the critical components and operational guidelines for the standard hydraulic impulse machine for testing hydraulic hose assemblies, tubing, coils, fittings and similar fluid system components. This revision to the AIR1228 provides a description of a system that meets the requirements for specifications including: AS603, AS4265, and ARP1383. This impulse system utilizes closed loop servo control with specifically generated command signal waveforms. Data accuracy and integrity are emphasized in this revision. Knowing the uncertainty of the pressure measurement is important whether using a resonator tube system, as described in the original release of this document, or a closed-loop systems as described in this release. The accuracy of the data measurement system and consistency of the pressure waveform are fundamental to test validity, regardless of the system type.
HISTORICAL
2009-08-27
Standard
AIR1358B
This Aerospace Information Report (AIR) indicates those dimensions, deemed critical by the manufacturer to assure proper mating of disconnect hose fittings. The dimensions are critical, but not necessarily complete, in defining these fittings since there are other criteria which must also be met.
HISTORICAL
2000-10-01
Standard
AIR1358A
This AIR indicates those dimensions, deemed critical by the manufacturer, which are required to be adhered to so that proper mating of the disconnect hose fitting with the correct disconnect be accomplished. The dimensions are critical, but not necessarily complete, in defining these fittings since there are other criteria which must also be met.
CURRENT
2014-12-31
Standard
AIR1358C
This Aerospace Information Report (AIR) indicates those dimensions, deemed critical by the manufacturer to assure proper mating of disconnect hose fittings. The dimensions are critical, but not necessarily complete, in defining these fittings since there are other criteria which must also be met.
CURRENT
2017-03-02
Standard
AMS3593B
This specification covers an irradiated, thermally-stabilized, flame-resistant, modified-polyvinylidene-fluoride plastic in the form of extra-thin-wall tubing.
HISTORICAL
1963-09-01
Standard
AIR797
This document lists military and industry specifications and standards which are used in aerospace systems and for ground servicing equipment. The characteristic limitations of the hose, which are of major importance to designers, and the sizes in which the hoses are standard are shown. Revisions and amendments, which are current for these specifications and standards are not listed.
HISTORICAL
1975-06-01
Standard
AIR797B
This document lists military and industry specifications and standards which are used in aerospace systems and for ground servicing equipment. The characteristic limitations of the hose, which are of major importance to designers, and the sizes in which the hoses are standard are shown. Revisions and amendments, which are current for these specifications and standards are not listed.
HISTORICAL
1978-11-01
Standard
AIR797C
This report lists military and industry specifications and standards which are used in aerospace systems and for ground servicing equipment. The characteristic limitations of the hose which are of major importance to designers and the sizes in which the hoses are standard are shown. Revisions and amendments which are current for these specifications and standards are not listed.
HISTORICAL
1968-01-01
Standard
AIR797A
This document lists military and industry specifications and standards which are used in aerospace systems and for ground servicing equipment. The characteristic limitations of the hose, which are of major importance to designers, and the sizes in which the hoses are standard are shown. Revisions and amendments, which are current for these specifications and standards are not listed.
HISTORICAL
1991-10-01
Standard
AIR797D
This report lists military and industry specifications and standards which are used in aerospace systems and for ground servicing equipment. The characteristic limitations of the hose which are of major importance to designers and the sizes in which the hoses are standard are shown. Revisions and amendments which are current for these specifications and standards are not listed.
CURRENT
1995-06-01
Standard
AIR797E
This document lists military and industry specifications and standards which are used in aerospace systems and for ground servicing equipment. The characteristic limitations of the hose, which are of major importance to designers, and the sizes in which the hoses are standard are shown. Revisions and amendments, which are current for these specifications and standards, are not listed.
CURRENT
1996-10-01
Standard
AIR1698A
This SAE Aerospace Information Report (AIR) is applicable to hose assemblies for which identification marking is not otherwise specified in procurement or performance standard or drawing.
CURRENT
1983-06-01
Standard
ARP1835
This Aerospace Recommended Practice covers general requirements for preservation, packaging, and packing of hose assemblies.
CURRENT
1999-07-01
Standard
ARP6002
This document establishes the industry standard practices for marking standard elastomeric hose used in aircraft manufacture and repair.
HISTORICAL
1993-03-02
Standard
ARP4785
This SAE Aerospace Recommended Practice (ARP) establishes the suggested requirements and test methods for the evaluation, qualification testing, and/or acceptance testing of fuel and pneumatic couplings, quick disconnects, hydraulic fittings, and hose assemblies. The paragraphs noted herein are general words and may be modified to fit specific hardware, materials, and usage which will appear in procurement specifications.
CURRENT
1999-09-01
Standard
ARP4785A
This SAE Aerospace Recommended Practice (ARP) establishes the suggested requirements and test methods for the evaluation, qualification testing, and/or acceptance testing of fuel and pneumatic couplings, quick disconnects, hydraulic fittings, and hose assemblies. The paragraphs noted herein are general words and may be modified to fit specific hardware, materials, and usage which will appear in procurement specifications.
CURRENT
1997-11-01
Standard
ARP4266
This document is intended to provide recommended contours and limits of size of the surfaces of the internal fluid passages of tube fittings for the portions that are not already defined by the fitting end design standard drawings.
CURRENT
1994-02-01
Standard
ARP1987A
This SAE Aerospace Recommended Practice (ARP) establishes the procedure for creating titles of G-3 Committee documents which will be published by the SAE Aerospace Organization. This standardization will avoid several different names describing the same item and will improve alphabetical listings of documents by subject.
CURRENT
1994-09-01
Standard
ARP1987/1
This SAE Aerospace Recommended Practice (ARP) establishes the guidelines for selection of titles of aerospace fitting documents generated by SAE Subcommittee G-3B.
CURRENT
1995-03-01
Standard
ARP1987/2
The scope of this document is to aid in the selection of hose and hose assembly titles.
HISTORICAL
1985-09-01
Standard
ARP1987
This recommended practice establishes the procedure for creating titles of G-3 Committee documents which will be published by the SAE Aerospace Organization. This standardization will avoid several different names describing the same item and will improve alphabetical listings of documents by subject.
CURRENT
1980-04-01
Standard
ARP1709
This specification covers the requirements for aircraft, hydraulic, self sealing, quick disconnect couplings, for use in type II hydraulic systems (-65°F to +275°F temperature range) as defined by MIL-H-5440.
Viewing 1 to 30 of 1303

Filter

  • Standard
    1303
  • Range:
    to:
  • Year: