Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 1890
CURRENT
2004-11-24
Standard
AIR5693
The scope of this document is limited to the compatibility of typical fluids that may come in contact with PTFE hose assemblies. PTFE hose assemblies may be braided with CRES wire, polyester or para-aramid fibers. Hose assemblies may be equipped with aluminum, CRES, titanium or nickel alloy fittings; and with fire resistant cover materials. All of these constituent materials of PTFE hose assemblies must be compatible with all of the fluids found in any particular application.
HISTORICAL
1980-12-01
Standard
AIR1698
CURRENT
1990-12-06
Standard
AIR310A
This Aerospace Information Report (AIR) is written as an aid for locating and identifying various fitting designs and configurations that are designated as standard parts.
HISTORICAL
1994-06-01
Standard
AIR310
This Aerospace Information Report (AIR) is written as an aid for locating and identifying various fitting designs and configurations that are designated as standard parts.
CURRENT
1992-01-27
Standard
AIR4298
This SAE Aerospace Information Report (AIR) describes equivalent type equipment and operational guidelines for a standard sine wave impulse test machine. The machine may be used for testing hydraulic tubing, fittings, hose assemblies, and similar fluid system components, if desired. The standard sine wave impulse test machine is established for the following purposes: A design guide for future machines being built by manufacturers and users. As a referee in the event of conflicting data from two or more nonstandard impulse machines. Such a referee machine might be built by an impartial testing activity.
CURRENT
1996-10-01
Standard
AIR4092A
To provide information regarding a unique failure mode and alternate solutions for consideration by application designers.
HISTORICAL
1972-11-01
Standard
AIR1228
This SAE Aerospace Information Report (AIR) establishes the part numbers and/or description of the critical components and operational guidelines for the standard hydraulic impulse machine for testing hydraulic hose assemblies, tubing, coils, and fittings and may be used for similar fluid system components, if desired. The standard impulse machine is established for the following purposes: As referee in the event of conflicting data from two or more nonstandard impulse machines. Such a referee machine might be built by an impartial testing activity. A design guide for future machines being built by manufacturers and users, or the upgrading of present machines. A design guide for higher pressure machines or special purpose machines being designed. It is not the intention of this document to obsolete present machines.
CURRENT
2009-01-07
Standard
AIR1228A
This SAE Aerospace Information Report (AIR) establishes the specifications and descriptions of the critical components and operational guidelines for the standard hydraulic impulse machine for testing hydraulic hose assemblies, tubing, coils, fittings and similar fluid system components. This revision to the AIR1228 provides a description of a system that meets the requirements for specifications including: AS603, AS4265, and ARP1383. This impulse system utilizes closed loop servo control with specifically generated command signal waveforms. Data accuracy and integrity are emphasized in this revision. Knowing the uncertainty of the pressure measurement is important whether using a resonator tube system, as described in the original release of this document, or a closed-loop systems as described in this release. The accuracy of the data measurement system and consistency of the pressure waveform are fundamental to test validity, regardless of the system type.
HISTORICAL
1975-09-01
Standard
AIR1378
This Aerospace Information Report (AIR) is written as a guide for the wording recommended for use, when applicable, in design and procurement specifications for tube fittings and tube assemblies, both for general aerospace fluid power applications and for specific applications. NOTE: A comprehensive writeup of the Impulse, Flexure and Fire Tests is included in the appendix.
HISTORICAL
1983-03-01
Standard
AIR1378A
This Aerospace Information Report (AIR) is written as a guide for the wording recommended for use, when applicable, in design and procurement specifications for tube fittings and tube assemblies, both for general aerospace fluid power applications and for specific applications.
HISTORICAL
1974-12-01
Standard
AMS3380B
This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible hose reinforced with wire braid.
HISTORICAL
1983-07-01
Standard
AMS3380C
This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible hose reinforced with wire braid.
CURRENT
1991-04-01
Standard
AMS3380D
This specification covers a polytetrafluoroethylene resin in the form of extruded and sintered flexible tube reinforced with wire braid.
HISTORICAL
1960-01-01
Standard
AMS3380
This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible tube reinforced with wire braid. Primarily for fluid lines operating in service up to 230 degrees C (446 degrees F) and under pressures up to 1500 psi (10,342 kPa).
HISTORICAL
1965-09-01
Standard
AMS3380A
This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible tube reinforced with wire braid. Primarily for fluid lines operating in service up to 230 degrees C (446 degrees F) and under pressures up to 1500 psi (10,342 kPa).
CURRENT
1993-10-01
Standard
AMS3389D
This specification covers a synthetic rubber in the form of a nonrigid, smooth bore, noncollapsing-type hose.
HISTORICAL
1991-10-01
Standard
AMS3388C
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose.
HISTORICAL
1961-07-01
Standard
AMS3389A
This specification covers a synthetic rubber in the form of a nonrigid, smooth bore, noncollapsing-type hose. This hose has been used typically for fueling aircraft, but usage is not limited to such applications. This hose is not intended for flexible connection between tractor and trailer, to be collapsed for drainage, or for operating pressures higher than 250 psi (1724 kPa).
HISTORICAL
1961-07-01
Standard
AMS3388A
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose. This hose has been used typically for fueling aircraft, but usage is not limited to such applications. This hose is not intended for flexible connection between tractor and trailer, to be collapsed for drainage, or for operating pressures higher than 185 psi (1276 kPa).
HISTORICAL
1991-10-01
Standard
AMS3389C
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose.
HISTORICAL
1958-08-01
Standard
AMS3389
This specification covers a synthetic rubber in the form of a nonrigid, smooth bore, noncollapsing-type hose. This hose has been used typically for fueling aircraft, but usage is not limited to such applications. This hose is not intended for flexible connection between tractor and trailer, to be collapsed for drainage, or for operating pressures higher than 250 psi (1724 kPa).
CURRENT
1993-10-01
Standard
AMS3388D
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose.
CURRENT
1993-10-01
Standard
AMS3387E
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing hose with textile reinforcement.
HISTORICAL
1958-08-01
Standard
AMS3388
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose. This hose has been used typically for fueling aircraft, but usage is not limited to such applications. This hose is not intended for flexible connection between tractor and trailer, to be collapsed for drainage, or for operating pressures higher than 185 psi (1276 kPa).
HISTORICAL
1991-10-01
Standard
AMS3386C
This specification covers a synthetic rubber in the form of a soft wall, smooth bore, collapsing type hose.
CURRENT
1993-10-01
Standard
AMS3386D
This specification covers a synthetic rubber in the form of a soft wall, smooth bore, collapsing-type hose.
Viewing 1 to 30 of 1890

Filter

  • Standard
    1890
  • Range:
    to:
  • Year: