Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 857
CURRENT
2017-06-09
Standard
ARP1804B
This SAE Aerospace Recommended Practice (ARP) outlines the design and performance requirements for a battery-powered electric tow tractor for the handling of baggage or cargo trailers in airline service. The use of “shall” in this document indicates a mandatory requirement. The use of “should” indicates a recommendation or that which is advised but not required.
HISTORICAL
2005-11-01
Standard
ARP1804A
This SAE Aerospace Recommended Practice (ARP) outlines the design and performance requirements for a battery-powered electric tow tractor for the handling of baggage or cargo trailers in airline service. The use of “shall” in this document indicates a mandatory requirement. The use of “should” indicates a recommendation or that which is advised but not required.
CURRENT
2012-12-05
Standard
ARP581B
This recommended practice covers a rail concept stand that may be used for horizontal disassembly and reassembly, and maintenance, incorporating certain design features which are defined herein. These features include the rail dimensions and width, length and height of stand to insure compatibility with rail concept type transport and positioning trailers.
CURRENT
2011-12-20
Standard
ARP1348B
This SAE Aerospace Recommended Practice (ARP) applies to airline trailer equipment with four wheel running gear pulled and steered through an integral tow bar, for use on airport ramps and other airport areas for transporting baggage, freight, and other materials. This ARP can apply to any airline/airport trailer chassis regardless of its equipment; the trailer bed can be designed to carry either bulk baggage/cargo, or a cargo unit load device by means of a rollerized conveyor system, or a piece of aircraft servicing equipment (e.g., ground power unit, air start unit, etc.).
HISTORICAL
1994-02-05
Standard
J1112_199402
This SAE Standard establishes definitions of specifications most commonly associated with grapple skidders. Specifications common to all articulated, rubber-tired log skidders are included in SAE J1110. The dimensions included in this document are basic and may be supplemented by the individual machine manufacturer. Dimensions shall be stated in SI units. Illustrations used herein are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been included to facilitate application of this document.
CURRENT
2003-11-03
Standard
J1112_200310
This SAE Standard establishes definitions of specifications most commonly associated with grapple skidders. Specifications common to all articulated, rubber-tired log skidders are included in SAE J1110. The dimensions included in this document are basic and may be supplemented by the individual machine manufacturer. Dimensions shall be stated in SI units. Illustrations used herein are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been included to facilitate application of this document.
CURRENT
2013-01-02
Standard
J1116_201301
This SAE Standard applies to self-propelled off-road work machines. Included are the following categories: Earthmoving Implements and Attachments Forestry Road Building and Maintenance Specialized Mining Powered Industrial Trucks This SAE Standard does not apply to Agricultural Tractors as defined in ANSI/ASAE S390 although some SAE standards are also applicable to Agricultural Tractors. NOTE: Most standards relating to agricultural tractors and implements are developed by ASABE.
HISTORICAL
1999-03-01
Standard
J1116_199903
This SAE Standard applies to machines that are in regular commercial production. Included are the following categories: Earthmoving Implements and Attachments Agricultural Tractors Forestry In spite of the appearance of the same names, such as tractors in more than one category, further development of this and related standards will demonstrate that there are differences in the fully-equipped working machine that may require distinction as to intended end-point field usage. These differences include: Names of optional implements Names of components of optional implements Definitions of specification terms as affected by installed optional implements Different mounting provisions on the machines for implements and other attachments Differences in design to achieve objectives for performance, durability, or operator or public safety
HISTORICAL
1986-06-01
Standard
J1116_198606
This recommended practice establishes categories of off-road self-propelled work machines. Where possible, this recommended practice shows which standards writing organization - SAE or other - will be responsible for each category for machine identification terminology, component nomenclature, definitions of specification terms, and other standards and recommended practices. This recommended practice applies to machines that are in regular commercial production. Included are the following categories: Construction, General Purpose Industrial, Agricultural, Forestry, Specialized Mining Machinery, Powered Industrial Trucks. In spite of the appearance of the same names, such as tractors and loaders in more than one category, further development of this and related recommended practices will demonstrate that there are differences in the fully-equipped working machine that may require distinction as to intended end-point field usage.
HISTORICAL
1976-04-01
Standard
J1129_197604
The purpose of this Information Report is to establish minimum performance levels in the operator's environment for heated, ventilated, and air- conditioned construction and industrial equipment cabs. Also established are heating and air-conditioning test procedures for determining operator environment temperature, humidity, and pressurization. Note: The subject of noise is not treated in this information Report. This Information Report establishes the minimum performance levels in the operator's environment: Minimum cab pressurization and ventilation levels under all conditions of heating, air conditioning, and ventilation. Maximum humidity and minimum temperature differential under air conditioning operation. minimum temperature differential under heater operation. The report also establishes uniform test procedures for determining minimum performance levels, as defined under 2.1.1- 2.1.3, under Heater and Air conditioner operation.
CURRENT
1987-01-30
Standard
J1129_198701
The purpose of this Information Report is to establish minimum performance levels in the operator's environment for heated, ventilated, and air- conditioned construction and industrial equipment cabs. Also established are heating and air-conditioning test procedures for determining operator environment temperature, humidity, and pressurization. Note: The subject of noise is not treated in this information Report. This Information Report establishes the minimum performance levels in the operator's environment: Minimum cab pressurization and ventilation levels under all conditions of heating, air conditioning, and ventilation. Maximum humidity and minimum temperature differential under air conditioning operation. minimum temperature differential under heater operation. The report also establishes uniform test procedures for determining minimum performance levels, as defined under 2.1.1- 2.1.3, under Heater and Air conditioner operation.
CURRENT
1987-09-01
Standard
J1136_198704
Minimum performance criteria for service braking systems, secondary stopping systems, and parking systems for all self-propelled vibratory and static roller/compactors are provided in this SAE Recommended Practice. The purpose of this document is to define minimum braking system performance for in-service machines and to provide test criteria by which machine braking system performance may be verified.
1976-07-01
Standard
J1135_197607
HISTORICAL
1979-09-01
Standard
J1136_197909
Minimum performance criteria for service braking systems, secondary stopping systems, and parking systems for all self-propelled vibratory and static roller/compactors are provided in this SAE Recommended Practice. The purpose of this document is to define minimum braking system performance for in-service machines and to provide test criteria by which machine braking system performance may be verified.
HISTORICAL
1976-04-01
Standard
J1136_197604
Minimum performance criteria for service braking systems, secondary stopping systems, and parking systems for all self-propelled vibratory and static roller/compactors are provided in this SAE Recommended Practice. The purpose of this document is to define minimum braking system performance for in-service machines and to provide test criteria by which machine braking system performance may be verified.
HISTORICAL
1975-05-01
Standard
J1111_197505
This SAE Standard characterizes grapple skidders and identifies the major components and parts most commonly associated therewith. Illustrations used herein are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been included to facilitate application of this document.
HISTORICAL
1993-06-28
Standard
J1110_199306
The purpose of this SAE Standard is to provide a uniform method of defining specification definitions for articulated, rubber-tired log skidders. Reference SAE J1112 for specification definitions of skidder-grapples.
HISTORICAL
1994-02-05
Standard
J1111_199402
This SAE Standard characterizes grapple skidders and identifies the major components and parts most commonly associated therewith. Illustrations used here are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been included to facilitate application of this document.
CURRENT
2003-07-17
Standard
J1110_200307
The purpose of this SAE Standard is to provide a uniform method of defining specification definitions for articulated, rubber-tired log skidders. Reference SAE J1112 for specification definitions of skidder-grapples.
CURRENT
2013-09-25
Standard
J1111_201309
This SAE Standard characterizes grapple skidders and identifies the major components and parts most commonly associated therewith. Illustrations used herein are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been included to facilitate application of this document
HISTORICAL
2002-12-19
Standard
J1111_200212
This SAE Standard characterizes grapple skidders and identifies the major components and parts most commonly associated therewith. Illustrations used herein are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been included to facilitate application of this document.
HISTORICAL
1975-05-01
Standard
J1112_197505
This SAE Standard establishes definitions of specifications most commonly associated with grapple skidders. Specifications common to all articulated, rubber-tired log skidders are included in SAE J1110. The dimensions included in this document are basic and may be supplemented by the individual machine manufacturer. Dimensions shall be stated in SI units. Illustrations used herein are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been included to facilitate application of this document.
HISTORICAL
2007-08-22
Standard
J1111_200708
This SAE Standard characterizes grapple skidders and identifies the major components and parts most commonly associated therewith. Illustrations used herein are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been included to facilitate application of this document.
CURRENT
2007-08-22
Standard
J1109_200708
This SAE Standard includes names of major components and parts particular to this type of machine. Illustrations used here are not intended to include all existing commercial machines, or to be exactly descriptive of any particular machine. They have been chosen to describe the principles to be used in applying this document (see Figures 1 and 2). Engine Sweep Operator Enclosure Seat Rear Frame Winch Arch Fairlead Main Fairlead Roller Auxiliary Fairlead Rollers Tire Rim Axle Driveline Steering Cylinder Front Frame Blade Arm1 Blade Decking Lug Blade Cylinder Radiator Log Bumper
HISTORICAL
1975-05-01
Standard
J1110_197505
The purpose of this SAE Standard is to provide a uniform method of defining specification definitions for articulated, rubber-tired log skidders. Reference SAE J1112 for specification definitions of skidder-grapples.
HISTORICAL
1976-07-01
Standard
J1152_197607
HISTORICAL
1977-10-01
Standard
J1152_197710
CURRENT
1992-12-01
Standard
J1152_199212
HISTORICAL
1980-04-01
Standard
J1152_198004
HISTORICAL
1976-07-01
Standard
J1155_197607
This recommended practice specifies a test procedure for determining the volume of pneumatic service brake actuators at any stroke.
Viewing 1 to 30 of 857

Filter

  • Standard
    857
  • Range:
    to:
  • Year: