Search Results

Flame spread over a melting thermally thick composite polymer is investigated in a channel flow above a condensed fuel. The condensed fuel consists of an isotropic (melted layer of) liquid near the heated surface and an anisotropic (not-yet-melted) solid surrounding it. The influence of the solid anisotropy is evaluated by changing the solid conductivity (ksx or ksy) in one particular direction (x in horizontal flame spread direction or y in vertical direction, see schematics in Figure 1) while keeping the other properties fixed. Note that the liquid conductivity kl has no isotropic behavior. Numerically, it is found that the flame spread rate decreases with either increasing ksx or ksy. The decrease with respect to ksy is less than for a comparable case described by the de Ris formula for an isotropic pure solid. The flame spread rate is more accurately determined by an analytical formula derived for spread across a melting solid fuel.

In order to satisfy China IV (equivalent to EU IV) emission regulations, an unconventional design concept was proposed with injector closely coupled with SCR can body. The benefit of this design is that the urea decomposition pipe was removed or drastically shortened, resulting in much smaller packaging space and lower cost of the whole system. However, the resulting short urea mixing distance generates concerns on low urea mixing efficiency and risks of urea deposits. In particular, airless urea injectors tend to generate incomplete evaporation of urea water solution, resulting in high risks of urea deposits. New aftertreatment mixing structures need to be developed to resolve these technical challenges.

To satisfy China IV emissions regulations, diesel truck manufacturers are striving to meet increasingly stringent Oxides of Nitrogen (NOx) reduction standards. Heavy duty truck manufacturers demand compact urea SCR NOx abatement designs, which integrate injectors, NOx sensors and necessary components on SCR can in order to save packaging space and system cost. To achieve this goal, aftertreatment systems need to be engineered to achieve high conversion efficiencies, low back pressure, no urea deposit risks and good mechanical durability. Initially, a baseline Euro IV Urea SCR system is evaluated because of concerns on severe deposit formation. Systematic enhancements of the design have been performed to enable it to meet multiple performance targets, including emission reduction efficiency and low urea deposit risks via improved reagent mixing, evaporation, and distribution. Acoustic performance has been improved from the baseline system as well.

Refuse trucks are used in many communities for garbage collection and compression in China. This article introduces representative driving cycles of refuse trucks in multiple cities. System configuration is described first. Then, traditional pedal map, shift-pattern, and shift-point are used as basis to optimize energy utilization for specific hybrid configurations under refuse truck driving situation. Since AC power is used as source for garbage compression, to take advantage of such operating characteristics, engine start and stop technology can be a viable technology to improve fuel economy. Experiments are conducted to reach the conclusions.