Search Results

This paper discusses the ground and range operations for a Shuttle derived Heavy-Lift Vehicle being launched from the Kennedy Space Center on the Eastern range. Comparisons will be made between the Shuttle and a heavy lift configuration (SLS-ETF MPCV - April 2011) by contrasting their subsystems. The analysis will also describe a simulation configuration with the potential to be utilized for heavy lift vehicle processing/range simulation modeling and the development of decision-making systems utilized by the range. In addition, a simple simulation model is used to provide the required critical thinking foundations for this preliminary analysis.

This paper describes the design and testing of a three phase, 200 Amp. per phase, AC power controller intended to replace electromechanical bus tie and cross tie contactors in commercial aircraft electric power systems. In order to design an effective overall electric power system, both the primary transmission subsystem and the secondary distribution subsystem must operate together, controlling the flow of power in a seamless fashion. This is not possible using electromechanical contactors in the primary subsystem.

A reliable nutrient delivery system is essential for long-term cultivation of plants in space. At the Kennedy Space Center, a series of ground-based tests are being conducted to compare candidate plant nutrient delivery systems for space. To date, our major focus has concentrated on the Porous Tube Plant Nutrient Delivery System, the ASTROCULTURE™ System, and a zeoponic plant growth substrate. The merits of each system are based upon the performance of wheat supported over complete growth cycles. To varying degrees, each system supported wheat biomass production and showed distinct patterns for plant nutrient uptake and water use.

To sustain the extra-vehicular activity (EVA) rate required to assemble and maintain the International Space Station (ISS), we must enhance our ability to plan, train for, and execute EVAs. An underlying analysis capability must be in place to ensure EVA access to all external worksites either as a starting point for ground training, to generate information needed for on-orbit training, or to react quickly to develop contingency EVA plans, techniques, and procedures. This paper describes a potential flight experiment for application of custom human modeling analysis to plan and train for EVAs to enhance space station functionality and usability through assembly and operation.

The McDonnell Douglas Delta family of launch vehicles, in its more than 30-year history, has proven to be the most reliable spacecraft deployment platform for both the US government and the private sector. This success is due to the continuous and focused application of advanced, affordable engineering and manufacturing technologies in all stages of the design, fabrication, assembly, quality assurance, and launch. One of the recent technological breakthroughs that has enhanced the Delta's service capabilities is the development and use of large composite structures in critical components. Among these structures is the payload fairing, which acts as a protective shroud for the spacecraft. Traditional composite manufacturing techniques, however, are very labor-intensive and time-consuming.

An expert system based Environmental Control and Life Support System (ECLSS) trade study tool is under development which calculates resource requirements and penalties for given system configurations and mission definition parameters. The user friendly, graphical software application allows important ECLSS resources such as power, mass, volume, resupply mass (consumable and expendable), heat rejection and ultimately cost to be analyzed in an efficient hierarchical manner. Hardware resources are calculated using scaling algorithms specific to each technology, based on existing hardware where possible. Fluid mass balances are tracked and summarized as fluids input into the system and waste output leaving the system. This tool will aid in technology selection and optimization of transportation vehicle or surface habitat designs.

Future military aircraft will demand lower cost and lower weight subsystems that are more reliable, and easier to maintain and support. To identify and develop subsystems integration technologies that could provide benefits such as these to current and future military aircraft, the Air Force Wright Laboratory (WL/FIVE) initiated the Subsystem Integration Technology (SUIT) program in 1991. McDonnell Douglas Aerospace (MDA) together with Pratt and Whitney (PWA), and AlliedSignal Aerospace Systems and Equipment (ASE) was one of three teams that participated in Phase I of the SUIT program. The MDA Team's goal was to conceptually formulate a SUIT approach which would provide significantly reduced weight and costs while increasing cooling and power generation capabilities. These goals were achieved with a new and innovative energy subsystem suite which integrates aircraft and engine subsystem power, cooling, pumping, and controls.

The unique development environment of NASA's Space Station Freedom (SSF) creates numerous challenges to the design of a common user interface for operating the spacecraft. Astronauts on board SSF will utilize multi-purpose workstations as their primary command and control interface to the vehicle. With the exception of some dedicated hardware controls, the vast majority of the workstation user interface will be implemented in software. The specification and design of the SSF user interface requires the synthesis of on-orbit operational requirements with multiple systems' functional requirements, all of which emanate from geographically and organizationally distributed entities. Human factors requirements as well as constraints imposed by the SSF Displays and Controls (D&C) system architecture are additional considerations.

The development of regenerative life support systems (RLSS) to support long duration manned space exploration is of great importance. To design future chambers effectively, it is necessary to model both chamber performance and plant growth in current systems. The Johnson Space Center RLSS test bed, which consists of the Variable Pressure Growth Chamber (VPGC) and the Ambient Pressure Growth Chamber (APGC), is a facility that is being used to investigate plant growth and support hardware integration. Detailed and simplified models of the VPGC and APGC have been developed to investigate system performance and response to changes in loading as well as to study long-term plant growth under varying environmental conditions, including temperature, light level, CO2 level, dew point or relative humidity, and photoperiod. To support these studies, models of two crops, lettuce and wheat, have also been developed and integrated into the detailed and simplified simulations of each chamber.

As manned spacecraft have evolved into larger and more complex configurations, the mandate for preventing, detecting, and extinguishing on-board fires has grown proportionately to ensure the success of progressively ambitious missions. The closed environment and high value of manned spacecraft offer the Fire Detection and Suppression (FDS) systems designer significant challenges. With the presence of Oxygen (O2), flammable materials, and ignition sources, it is impossible to completely remove the likelihood of a spacecraft fire. Manned spacecraft contain these three ingredients for fire; therefore, it becomes profitable to review past designs of FDS systems and ground testing to determine system performance and lessons learned in the past for present and future applications.

The Space Station Freedom program requires long-life thermal control coatings that are stable in low Earth orbit (LEO). To provide designers with a variety of coatings and optical properties, improvements were made to existing coatings, and new thermal control coatings were developed. Anodized aluminum was demonstrated to be an acceptable substrate for inorganic thermal control coatings such as Z-93. Mixtures of Z-93 with stable black oxides provided a wide range of optical properties and were stable in a simulated LEO environment. In addition, sulfuric acid anodized aluminum was developed to a production status to provide controlled optical properties for many aluminum alloys.

The National Aeronautics and Space Administration (NASA) Space Station Freedom (SSF) will use Flow-Through Radiators (FTRs) to reject waste heat that is collected from the on-board Heat Acquisition Devices (HADs). The waste heat is sent to the FTRs via the Pump Module Assembly (PMA) subsystem of the External Active Thermal Control System (EATCS). Two developmental FTR panels were integrated with the EATCS Ground Test Article (GTA). The integrated components were investigated under a thermal/vacuum environment in Thermal/Vacuum Chamber A at NASA/JSC during June, 1992. A detailed SINDA/FLUINT FTR model was developed to predict the steady-state thermal/hydraulic performance of the FTRs. A simplified SINDA/FLUINT FTR model was also developed for use in the GTA integrated model. Schematics and plots comparing the test data and model results are presented for both steady-state and transient conditions.

This paper presents an overview of the design and operation of the internal thermal control system (ITCS) developed for Space Station Freedom by the NASA-Johnson Space Center and McDonnell Douglas Aerospace to provide cooling for the resource nodes, airlock, and pressurized logistics modules. The ITCS collects, transports, and rejects waste heat from these modules by a dual-loop, single-phase water cooling system. ITCS performance, cooling, and flow rate requirements are presented. An ITCS fluid schematic is shown and an overview of the current baseline system design and its operation is presented. Assembly sequence of the ITCS is explained as its configuration develops from Man Tended Capability (MTC), for which node 2 alone is cooled, to Permanently Manned Capability (PMC) where the airlock, a pressurized logistics module, and node 1 are cooled, in addition to node 2.

This paper presents the integrated approach toward failure detection, isolation, and recovery/reconfiguration to be used for the Space Station Freedom External Active Thermal Control System (EATCS). The on-board and on-ground diagnostic capabilities of the EATCS are discussed. Time and safety critical failures, as well as noncritical failures, and the detection coverage for each provided by existing capabilities are reviewed. The allocation of responsibility between onboard software and ground-based systems, to be shown during ground testing at the Johnson Space Center, is described. Failure isolation capabilities allocated to the ground include some functionality originally found on orbit but moved to the ground to reduce on-board resource requirements. Complex failures requiring the analysis of multiple external variables, such as environmental conditions, heat loads, or station attitude, are also allocated to ground personnel.

A CELSS has been defined based on current or near-term technology. The CELSS was sized to support the metabolic load of four people on the Moon for ten years. A metabolic load of 14 MJ/person/day is assumed, including an average of 2.6 hr of EVA/person/day. Close to 100% closure of water, and oxygen, and 85% closure of the food loop is assumed. With 15% of the calories supplied from Earth, this should provide adequate dietary variety for the crew along with vitamin and mineral requirements. Other supply and waste removal requirements are addressed. The basic shell used is a Space Station Freedom 7.3 m (24 ft) module. This is assumed to be buried in regolith to provide protection from radiation, meteoroids, and thermal extremes. A solar dynamic power system is assumed, with a design life of 10 years delivering power at 368 kWh/kg. Initial estimates of size are that 73 m2 of plant growth area are required, giving a plant growth volume of about 73 m3.

The NASA Johnson Space Center has plans to integrate a Solid Amine Water Desorbed (SAWD II) carbon dioxide removal subsystem into the Variable Pressure Growth Chamber (VPGC). The SAWD II subsystem will be used to remove any excess carbon dioxide (CO2) input into the VPGC which is not assimilated by the plants growing in the chamber. An analysis of the integrated VPGC-SAWD II system was performed using a mathematical model of the system implemented in the Computer-Aided System Engineering and Analysis (CASE/A) package. The analysis consisted of an evaluation of the SAWD II subsystem configuration within the VPGC, the planned operations for the subsystem, and the overall performance of the subsystem and other VPGC subsystems. Based on the model runs, recommendations were made concerning the SAWD II subsystem configuration and operations, and the chambers' automatic CO2 injection control subsystem.

The selection of a life support system for a lunar base depends on many interrelated factors, both programmatic and technical. Many factors are identifiable through the application of a systems engineering approach to the lunar base design, in which base and mission requirements are determined. In addition, there is a range of evolving technology options whose cost and maturity affect their potential for inclusion in base designs. Results of ongoing lunar base design are presented with emphasis on the selection of promising approaches for advanced life support systems that decrease overall cost for a single, permanently inhabited lunar base. We identify critical technology areas that inhibit the selection of closed life support systems and propose alternative basing scenarios to alleviate development and operational costs. In particular, we quantify the cost savings associated with establishing a base at a lunar pole in a region of permanent sunlight.

A method for applying an organic coating to Z-93, an inorganic white thermal control paint, was developed to protect Z-93 from contamination and damage. A layer of FEP Teflon™ was applied over Z-93 to provide a smooth, continuous surface without adversely affecting its optical properties. Additionally, new low-absorptance, controlled-emittance thermal control paints were developed for low Earth orbit (LEO) applications, such as the International Space Station. These paints have a range of infrared emittances from 0.26 to 0.88, and are stable in simulated LEO environments, including atomic oxygen and ultraviolet radiation. Patent applications have been submitted for these concepts.

The Space Constructible Radiator (SCR) Life Test heat pipe performance testing is currently conducted at NASA/Johnson Space Center as part of the Advanced Technology Development Program. The SCR is a dual passage, monogroove heat pipe radiator designed and manufactured by Grumman Aerospace for NASA. The heat pipe has many aerospace applications since it can transport a large amount of heat with a compact lightweight design. As the micro-meteoroid/orbital debris environment worsens, it may be advantageous to add the heat pipe radiator to the Space Station's thermal control system. The SCR Life Test has been operating over the last 10 years and will continue until the year 2000. The overall heat transfer coefficient has decreased from 792 W/K (1500 Btu/Hr-°F) to 475 W/K (900 Btu/Hr-°F) but appears to have stabilized. This paper summarizes the SCR Life Test setup and the test results to date.

This paper defines the value of free-flying cameras to the Space Station. The use of free-flying cameras is an alternative to reliance on fixed cameras. The analysis is based upon results from recent neutral buoyancy evaluations of a free-flying camera known as the Supplemental Camera and Maneuvering Platform (SCAMP). SCAMP was evaluated for inspection and viewing capabilities that will be required by Space Station. Test results demonstrated that a free-flying camera could be used effectively for inspecting structure, viewing labels, providing views for control of extravehicular robotics (EVR) and for ground assistance during extravehicular activity (EVA) tasks.