Criteria

Text:
Sector:
Display:

Results

Viewing 1 to 30 of 279
HISTORICAL
1974-03-01
Standard
AMS3696
This specification covers a two-component air-curing, aluminum-powder -filled, epoxy-resin-base material in the form of a paste or putty, suitable for application by spatula or putty-knife. Primarily for filling small holes, crevices, and gaps or for smoothing areas requiring thin layers of material to produce the required smoothness on aerodynamic surfaces subject to service temperatures from -55 to +85 degrees C (-65 to +185 degrees F).
HISTORICAL
1974-03-01
Standard
AMS3697
This specification covers a two-component air-curing, aluminum-powder -filled, epoxy-resin-base material in the form of a paste or putty, suitable for application by spatula or putty-knife. Primarily for filling small holes, crevices, and gaps or for smoothing areas requiring thin layers of material to produce the required smoothness on aerodynamic surfaces subject to service temperatures from -55 to +150 degrees C (-65 to +300 degrees F).
HISTORICAL
1965-02-15
Standard
AMS3363B
This specification covers a silicone rubber in the form of a two-component liquid compound.
HISTORICAL
1961-01-15
Standard
AMS3363
This specification covers a silicone rubber in the form of a two-component liquid compound.
HISTORICAL
1964-01-31
Standard
AMS3363A
This specification covers a silicone rubber in the form of a two-component liquid compound.
HISTORICAL
1965-02-01
Standard
AMS3364A
This specification covers a silicone rubber in the form of a two-component liquid compound. Primarily for potting or encasement of electrical and electronic components with an elastomeric medium or for production of mechanical rubber parts in low-pressure tooling. Elastomeric properties are retained in operation from -55 to +230 degrees C (-67 to +446 degrees F). For mechanical applications where compression set resistance is important, elevated temperature post-curing of parts may be required.
HISTORICAL
1964-01-01
Standard
AMS3364
This specification covers a silicone rubber in the form of a two-component liquid compound. Primarily for potting or encasement of electrical and electronic components with an elastomeric medium or for production of mechanical rubber parts in low-pressure tooling. Elastomeric properties are retained in operation from -55 to +230 degrees C (-67 to +446 degrees F). For mechanical applications where compression set resistance is important, elevated temperature post-curing of parts may be required.
HISTORICAL
1964-01-01
Standard
AMS3362
This specification covers a silicone rubber in the form of a two-component liquid compound. Primarily for potting or encasement of electrical and electronic components with an elastomeric medium or for production of mechanical rubber parts in low-pressure tooling. Elastomeric properties are retained in operation from -55 to +230 degrees C (-67 to +446 degrees F). For mechanical applications where compression set resistance is important, elevated temperature post-curing of parts may be required.
HISTORICAL
1965-02-01
Standard
AMS3362A
This specification covers a silicone rubber in the form of a two-component liquid compound. Primarily for potting or encasement of electrical and electronic components with an elastomeric medium or for production of mechanical rubber parts in low-pressure tooling. Elastomeric properties are retained in operation from -55 to +230 degrees C (-67 to +446 degrees F). For mechanical applications where compression set resistance is important, elevated temperature post-curing of parts may be required.
2011-11-07
WIP Standard
AMS3168A
This specification covers liquid aqueous cleaners. These aqueous cleaners have been used typically for cleaning aircraft primary and secondary structural surfaces prior to application of adhesion promoters and/or sealing materials, but usage is not limited to such applications.
2011-09-19
WIP Standard
G911AC
This specification covers general purpose non-hardening sealing compounds which provide corrosion protection.
2017-04-24
WIP Standard
G916AB
This specification covers the standard contaminant used to test the cleaning ability of aerospace cleaners.
CURRENT
2003-04-24
Standard
AMS3267/2B
This specification covers accelerated curing synthetic rubber compounds with corrosion inhibitors and low adhesive strength supplied as a two-component system. This product has been used typically for sealing aircraft access doors and accessories where gaskets are required, but usage is not limited to such applications. Compound is classified as a B-1/2 sealing compound; the compound being suitable for application by an extrusion gun or spatula with a minimum application time of 1/2 hour after mixing.
CURRENT
2003-04-24
Standard
AMS3267/4B
This specification covers accelerated curing synthetic rubber compounds with corrosion inhibitors and low adhesive strength supplied as a two-component system. This product has been used typically for sealing aircraft access doors and accessories where gaskets are required, but usage is not limited to such applications. Compound is classified as a B-2 sealing compound; the compound being suitable for application by an extrusion gun or spatula with a minimum application time of two hours after the start of mixing.
HISTORICAL
1976-01-15
Standard
AMS3359
This specification covers a room-temperature-vulcanizing, elastomeric silicone compound.
HISTORICAL
1976-01-01
Standard
AMS3361
This specification covers a room-temperature-vulcanizing, elastomeric silicone compound in the form or a base compound and a catalyst. This compound has been used typically for potting and encapsulating electronic products for use at temperatures from -50 to +260 degrees C (-58 to +500 degrees F) where resistance to reversion is not required, but usage is not limited to such applications.
HISTORICAL
1976-01-01
Standard
AMS3358
This specification covers a room-temperature-vulcanizing, elastomeric silicone compound. This compound has been used typically for potting and encapsulating electronic products for service from -50 to +260 degrees C (-58 to +500 degrees F) where resistance to reversion is not required, but usage is not limited to such application.
HISTORICAL
1961-01-01
Standard
AMS3366
This specification has been declared NONCURRENT by the Aerospace Materials Division, SAE, as of February 22, 1989. It is recommended, therefore, that this specification not be specified for new designs.
2013-03-07
WIP Standard
AMS3819D
This specification covers both woven and nonwoven absorbent materials supplied either as dry cloths or presaturated cloths for solvent cleaning process applications.
2011-11-07
WIP Standard
AMS3167C
This specification covers liquid solvent cleaners.
2017-10-14
WIP Standard
AMS3374E
This specification covers six (6) types of sealing compounds curing to elastomeric materials.
2017-10-14
WIP Standard
AS5127C
This standard describes the accepted methods used for preparing aerospace sealant test specimens for qualification and quality conformance or acceptance testing. AS5127/1 and AS5127/2 are to be used in conjunction with this document and the applicable AMS specifications.
HISTORICAL
1988-04-01
Standard
AMS3368A
This specification covers a silicone rubber in the form of a two-component liquid.
CURRENT
2012-01-17
Standard
AMS3368B
This specification covers a silicone rubber in the form of a two-component liquid.
HISTORICAL
1988-04-01
Standard
AMS3370A
This specification covers a silicone resin in the form of a two-component liquid.
Viewing 1 to 30 of 279