Criteria

Text:
Sector:
Display:

Results

Viewing 1 to 30 of 41
2014-06-19
WIP Standard
GEIATB0002A
This Bulletin is initially intended to be used to convey a combination of information to CM practitioners, both new and already skilled personnel alike. It provides the "what" of CM products and activities; with the "when" of CM correlated to DoD acquisition phases and milestones – thereby giving a time-phased depiction. The document spreadsheet should be read from top to bottom. It shows both the CM activities and products that should be performed and accomplished on a program or project. Next it provides a brief description of the CM activity or product and a column providing a reference(s) to other sources of information to learn even more about how the activity or product should be accomplished. Also included is a column for suggested level of CM control to be applied to the activity/product, from an Industry perspective. Future iterations will include a more complete dataset covering columns for entry criteria, exit criteria and related products from other skillcodes/disciplines.
CURRENT
2014-10-01
Standard
CMB6_6
CURRENT
2014-10-01
Standard
CMB6_5
CURRENT
2014-10-01
Standard
DMG1
CURRENT
2014-10-01
Standard
DMG2
This document provides guidance in the developing, managing, controlling and transmitting of data in the current electronic environment.
CURRENT
2014-10-01
Standard
CMB7_4A
This Bulletin provides a comprehensive list of Terms and Definitions used in or related to TechAmerica prepared standards/documents. The information in these listings was extracted from standards and documents prepared by the Systems Engineering (G47), Configuration Management (G33), Life Cycle Logistics Supportability and Enterprise Information Management Interoperability Committees along with other pertinent international, industry and government standards. It is intended that this bulletin be used as a resource to help with harmonization of terms and definitions across standards. One should be cognizant of the release date of this Bulletin and understand that updates to the included standards and handbooks after this Bulletin was released may affect its accuracy.
CURRENT
2016-06-16
Standard
EIA441
This standard is intended to serve as a guide in the coordination of system design to promote uniformity of the nomenclature and description of the operator devices.
CURRENT
2016-06-16
Standard
EIA408
This standard applies to the interconnection of data terminal equipment and numerical control equipment at the tape reader interface. The data terminal would typically be connected to a remote data source/sink such as a computer. This standard is applicable for the interchange of signals when used in conjunction with electronic equipment, each interchange circuit of which has a single return (signal ground) that can be interconnected at the interface point.
CURRENT
2015-07-01
Standard
EIA244
This standard for Numerical Machine Control Perforated Tape is intended to serve as a guide in the coordination of equipment design, to minimize the number of sizes and codes of perforated tape used, and to minimize the varity of perforated tape preparation equipment required by users of numerically controlled machines.
CURRENT
2016-06-28
Standard
EIA511
The Manufacturing Message Specification is an application layer standard designed to support messaging communications to and from programmable devices in a Computer Integrated Manufacturing (CIM) environment. This environment is referred to in this standard as the manufacturing environment. This standard does not specify a complete set of services for remote programming of devices, although provision or such a set of services may be subject of future standardization efforts.
CURRENT
2016-06-17
Standard
EIA765A
This index is presented to provide a quick reference of international and national quality standards and publications that support general quality system elements. This reference is a list of quality standards a company may with to consider when implementing or improving their quality system.
CURRENT
2015-07-01
Standard
EIAIS647
This standard establishes the performance requirements for the control of the electromagnetic emissio and susceptibility characteristics of electronic, electrical, and eletromechanical equipment and subsystems designed or procured for use in severe electromagnetic environments such as ships, aircraft, spacecraft, armored vehicles, tc. Such equipment and subsystems may be used independently or as an integral part of other subsystems or systems.
CURRENT
2015-07-01
Standard
EIAIS648
This standard establishes general techniques for use in the measurement and determination of the electromagnetic emission and susceptibility characteristics of electronic, electrical, and electromechanical equipment and subsystems.
CURRENT
2015-07-01
Standard
EIARS431
This standats covers both active amd passive aspects of the electrical interface between the Munerical Control (NC) and the machine power and logic contril, motor drive equipment, and other electrical apparatus on or associated with the machine tool.
CURRENT
2014-10-01
Standard
GEIAHB748_1
This guide clearly defines the purpose, goals, and objectives of an IBR. It also describes the attributes of an effective IBR and discusses a baseline review process that will lead to a better understanding of program risks. It provides a common definition and framework for the IBR Process. This process harmonizes, and to the extent possible, unifies the management objectives for all PMs. The IBR Process enables managers to effectively utilize the project Performance Measurement Baseline (PMB) to assess performance, and to better understand inherent risks. The IBR Process should continue throughout the life of a project.
CURRENT
2014-10-01
Standard
CMB6_10
Assist CM and engineering personnel in the implementation and coordination of CM unique procedures and disciplines of Configuration Identification, Change Control, Status Accounting and Audits.
CURRENT
2014-10-01
Standard
CMB5A
The role of CM, within any one company's organization, on the development and production of a product has been established by internal company needs or imposed by customer dictum. (As used hereinafter, in order to reduce any confusion, computer programs, components, software, hardware, firmware, etc., are included in the designation "PRODUCT".) The primary focus of this Bulletin is directed toward the Buyer and Supplier personnel who will be managing hardware products in the production phase and software products in the full-scale development phase. The trend in DoD is toward expanded use of standardized components and subassemblies, using competitive reprocurement. The DoD needs to know the full span of CM requirements which should be included in the production contract and the management tasks that will have to be accomplished.
CURRENT
2014-10-01
Standard
CMB6_1C
CURRENT
2014-10-01
Standard
CMB4_1A
This Bulletin is intended for use as a guide and defines the terms and definitions to be used during the development, documentation, verification, and delivery cycles of new and modified computer software. It lists and defines the most common terms currently used in the world of computer software configuration management. There has been no attempt to compete with some of the more formal documents in use within the software programming community.
CURRENT
2014-10-01
Standard
CMB4_4
The very nature of configuration management is the control of the configuration. This was the initial premise under which the control discipline was established and, later, formalized in DoD-D-5010.19 (1969) into a statement which defined control as: "The systematic evaluation, coordination, approval or disapproval, and implementation of all approved changes in the configuration of a configuration item after formal establishment of its configuration identification." What this definition does not impart is the scope and magnitude of the configuration change control task, or the rationale for configuration changes. The purpose of this bulletin is to describe the software change control process in the context of a structured programming environment.
CURRENT
2014-10-01
Standard
CMB4_3
CURRENT
2014-10-01
Standard
CMB6_8
CURRENT
2014-10-01
Standard
CMB6_9
CURRENT
2014-10-01
Standard
CMB7_1
The scope of this bulletin is to provide guidance on the use of current and future technologies for the electronic interchange of CM data.
CURRENT
2014-10-01
Standard
CMB6_3
Viewing 1 to 30 of 41