Criteria

Text:
Sector:
Display:

Results

Viewing 1 to 30 of 50
CURRENT
2016-05-31
Standard
CRB1
Expert systems are a wave of the information processing future. As time goes on they will become more and more part of the mainstream. However, a necessary prerequisite to moving them into widespread use is to reduce the methodologies for expert system development closer to the more generally accepted software engineering techniques. This report offers a step towards that goal. It describes an alternative software life cycle model for expert system development. Since the field of Artificial Intelligence is so broad, this report limits the software to be considered. Systems that would be of the greatest interest to DoD over the next 5 to 7 years would be expert systems that have the following attributes: - may reason with uncertainty - are not necessarily rule-based - are non-learning systems. For these systems, a developmental cycle is articulated, and each phase of the cycle described.
CURRENT
2016-05-31
Standard
CRB2
This paper originated with a software quality panel workshop at the EIA Computer Resources Workshop. The panel group initially focused on requirements for nondeliverable software. It was felt that the requirements for deliverable software were well covered by Department of Defense standards but non-deliverable software issues were not adequately covered. After much discussion, including attempts to define nondeliverable by examples of software types, a surprising unanimous conclusion was reached by the participants. That is: the states of "deliverable" and "non-deliverable" had no bearing on the quality of the software, and thereby also had no bearing on the quality assurance requirements that should be applied for that software. Rather, the only rational application of quality assurance was primarily dependent on the impact that the software had, or could have, on the end product (ยก.e. the ultimate mission).
CURRENT
2015-07-01
Standard
EIA484A
The increasing use of computers and related equipment in Direct Numericai Control (DNCI) Systems for storage and distribution of machine programs to numerically controlled machines and for communication between various components of DNC systems has demonstrated the need for a standard data communication link between the DNC and the numerical control unit. As a result, the EIA Committee IE-31 which is made up of representatives of numerical control system builders, machine builders and users has prepared this standard for use by people specifying, building and using DNC systems.
CURRENT
2016-05-31
Standard
EIA358C
The information and comments contained in this PREFACE should not be considered part of the Standard. They have been included for clarification and guidance purposes only. American National Standard Code for Information Interchange (ANSI X3.4) is designed to achieve coding uniformity for information interchange betweend ata processing and communication systems. The increasing use of computers and related equipment for preparation of perforated tape for numerical machine control and for conlmunication between various conlponents of advanced numerically controlled systems has demonstrated the need for standardized usage for numerical control. As a result, the EIA 1E-3 1 Committee,which is made up of representatives of control system builders, machine builders, and users,has prepared this Standard for use by people building and using numerical control equipment.
CURRENT
2016-05-31
Standard
EIA555
This Specification covers a statistical sampling plan for lot inspection by attributes. It verifies that the customer's specified quality level (SQL) is not being exceeded. The estimate of fraction nonconforming determined by EIA Interim Standard No. EIA-554 is used to select the optimum sample plan for verifying that a given lot meets the specified quality level (SQL).
CURRENT
2016-05-31
Standard
EIA554_2
This standard is intended to provide a uniform method of determining proportion nonconforming in finished components and to provide a standardized definition of the quality index referred to as PPM. The method used here is primarily directed at components whose production or procured volume is large enough, during some predefined sampling period, to give statistically meaningful information.
CURRENT
2015-07-01
Standard
EIA554A
This standard is intended to provide guidance for selecting standardized methods for estimating the proportion nonconforming expressed as PPM. These methods are contained in EIA 554-1, EIA 554-2 and EIA 591.
CURRENT
2016-05-31
Standard
EIA554_1
This standard is intended to provide a uniform method of calculating an estimate of the proportion nonconforming in finished components and to provide a standardized definition of the quality index referred to as Average Outgoing Quality (AOQ). The method used here is primarily directed at components whose production or procured volume is large enough, during some predefined sampling period, to give statistically meaningful information.
CURRENT
2015-07-01
Standard
EIA548
Scope is unavailable.
CURRENT
2015-07-01
Standard
EIA494B
The scope of this standard is the definition of the response of a numerically controlled machine to a valid sequence of records made up of 32 bit binary words or ASCII text strings. The standard defines the structure of these records and of the 32 bit binary words or ASCII text strings which make up the records. This standard addresses the control of machines capable of performing 2, 3, 4, and 5 axis motion of an active tool (mill, laser, pen, etc.) relative to a part, and those capable of 2 and 4 axis tool motion relative to a rotating part (turning machines), including parallel tool slide sets capable of concurrent (merged) motion.
CURRENT
2015-07-01
Standard
EIA681
It is the purpose of this document to provide guidance for companies and registrars to achieve a consistent assessment of a producers compliance to the requirements of Process Certification (EIA-599). In addition , a technique is provided as an option for the assessment of a producer's level of quality system maturity.
CURRENT
2015-07-01
Standard
EIA601A
This standard specifies requirements for the approval and maintenance of a manufacturer's capability and the procedures for the test and release of passive electronic components manufactured under capability approval. It also includes requirements for generic specifications that invoke this standard. It applies to all passive electronic components to be released under the capability requirements of an EIA generic and/or sectional and/or detail specification.
CURRENT
2016-06-17
Standard
EIA599A
This Standard is applicable to suppliers of electronic components, assemblies, equipment and related materials. This standard establishes the general requirements to achieve a certified process. The use of this standard is intended for any manufacturing or service company whose goal is to achieve customer satisfaction through continuous improvement.
CURRENT
2015-07-01
Standard
EIA585
(From Standards Proposal No. 2358, formulated under the cognizance of the EIA Quality and Reliability Engineering (QRE) Committee.)
CURRENT
2015-07-01
Standard
EIA832
The procedure outlined in this document is applicable to any manufacturing or service process. It may be used on part of a process or and entire process or a series of sequential processes.
CURRENT
2016-06-16
Standard
EIA830
To describe a model that is applicable during the acquisition process to gain insight into suppliers' approaches to using metrics in monitoring, managing, and improving their processes and products. This model also facilitates a common framework to understand and recognize potential suppliers' performance on relevant past contracts or purchase orders.
CURRENT
2016-06-16
Standard
EIAEDIF1
The increase in the number of silicon foundries and CAD/CAE system and workstation companies, and the problem of movement of data among in-house design systems has made a standard interchange format for electronic design data essential. The benefits of the general adoption of a standard interchange format are important and far reaching. The customer receives a much wider variety of feasible choices, and free competition in both CAEYCAD system/tool businesses and foundry businesses is enhanced. The electronic circuit designer and customer of CAE/CAD system and foundry service can expect compatibility among these products. The designer can choose equipment and services best suited for a particular task with a minimum of overhead. Foundries can work with customers regardless of the CAE/CAD equipment that the customer is using.
CURRENT
2016-06-16
Standard
EIAAB3D
Scope is unavailable.
CURRENT
2016-06-16
Standard
EIAEDIF2
This volume is the second in a series of monographs which will make the standard (ANSUEIA 548-1988) easier to understand. It is intended to be used as a companion to the EDIF Reference Manual Version 2.0.0, which is also published by the EL4 (ISBN 0-7908-0000-4). This volume gives an introduction to the concept of connectivity in the format. Concepts are explained in a general way; constructs, such as net, appear in italics throughout this volume. Whenever more detail is desired about a topic the italicized constructs should be consulted in the EDIF Reference Manual. The EDIF Reference Manual contains the official definition of the format and should always be taken as the authoritative source of information. Further application guides will be provided in later volumes of this series.
CURRENT
2016-06-16
Standard
EIAEDIFAG1
This document offers some conventions for the use of EDIF in transfer applications involving schematic designs. It discusses the use of EDIF 2 0 0 constructs that apply to the SCHEMATIC view. This document does not attempt to cover the use of EDIF for the transfer of all design aspects, It is intended to be a starting point for implementing EDIF schematic translators. It is not an EDIF user manual. It is not an amendment to the EDIF 2 O O Recommended Standard ANSIIEIA-548, which contains the official definition of the format and should always be taken as the authoritative source of EDIF information. This document assumes you are familiar with schematic capture systems but not familiar with EDIF. You will need to refer to EIA-548 for detailed definitions of some of the constructs discussed below.
CURRENT
2016-06-16
Standard
EIAEP2F
The Electronic Industries Association is the national trade organization representing electronic industry interests in the United States. Its primary mission is to enhance the competitiveness of the American producer. EIA supports and advances national defense, economic growth, technological progress, and all interests of the electronic industries compatible with the public welfare. We represent the full spectrum of manufacturers in the electronic industries, from manufacturers of the smallest electronic part to corporations that design and produce the most complex systems used in defense, space and industry.
CURRENT
2016-06-16
Standard
EIAEP12A
Scope is unavailable.
CURRENT
2016-06-15
Standard
EIAIS106
This standard will assist the vendors and users of CASE tools in developing mechanisms for interchanging information between CASE tools. This standard specifies an element of a family of related standards. When used together, these standards specify a mechanism for transfemng information between CASE tools. This standard, EIAIIS-IO6 CDIF - CASE Data Interchange Format - Overview, describes the architecture of the CDIF Family of Standards and provides an overview to all the current standards that form the CDIF Family of Standards.
CURRENT
2016-06-15
Standard
EIAIS108
This standard defines how CDIF supports multiple exchange Syntaxes and Encoding, and describes how CDIF meta-models are concretely represented during a transfer. EIAIZS-IO9 CDIF - Trartsfer- Format - Syntax SYNTAX.1 and EIAIIS-II0 CDIF - Transfer Format - Encoding ENCODING.1 define one specific CDIF Syntax and Encoding.
CURRENT
2015-07-01
Standard
EIAIS103A
This document is the authoritative reference for the Library of Parameterized Modules (LPM) standard version 2 1 O. This specification defines the semantics of each module along with a complete description of the module's functionality as well as the syntaxfor instantiating LPM modules in an EDIF netlist. The intended audience for this document is CAE vendors, silicon vendors, and only secondarily, logic designers. It is assumed that the reader is familiar with logic design, design automation tools and silicon implementation options. What the reader should get out of this document is an understanding of the benefits of the LPM standard as well as the details required to implement an LPM interface.
CURRENT
2016-06-15
Standard
EIAIS110
This document is intended to be used by anyone wishing to understand and/or use CDIF. This dticument provides a definition of an encoding for CDIF transfers. -those evaluating CDIF -those who wish to understand the principles and concepts of a CDIF transfer -those developing importers and exporters.
CURRENT
2016-06-15
Standard
EIAIS107
This standard will assist the vendors and users of CASE tools in developing mechanisms for interchanging information between CASE tools. This standard specifies an element of a family of related standards. When used together, these standards specify a mechanism for transferring information between CASE tools.
CURRENT
2016-06-15
Standard
EIAIS109
The CDIF Family of Standards is primarily designed to be used as a description of a mechanism for transferring information between CASE tools. It facilitates a successful transfer when the authors of the importing and exporting tools have nothing in common except an agreement to conform to CDIF. The language that is defined for the Transfer Format also has applicability as a general language for ImportExport from repositories. The CDIF Integrated Meta-model defined for CASE also has applicability as the basis of standard definitions for use in repositories.
CURRENT
2015-07-01
Standard
EIAIS112
This document is intended to be used by anyone wishing to understand and/or use CDIF. This document provides a definition of a single subject area of the CDIF Integrated Meta-model. It is suitable for: - those evaluating CDIF - those who wish to understand the principles and concepts of a CDIF transfer - those developing importers and exporters.
CURRENT
2016-06-15
Standard
EIAIS111
This document is intended to be used by anyone wishing to understand and/or use CDIF. This document provides a definition of a single subject area of the CDIF integrated Meta-model. It is suitable for: -those evaluating CDIF -those who wish to understand the principles and concepts of a CDIF transfer -those developing importers and exporters.
Viewing 1 to 30 of 50