Criteria

Text:
Sector:
Display:

Results

Viewing 1 to 30 of 209
HISTORICAL
1988-12-01
Standard
J113_198812
This SAE Recommended Practice covers the mechanical and chemical requirements of hard-drawn carbon-steel spring wire in two classes used for the manufacture of mechanical springs and wire forms generally employed for applications subject to static loads or infrequent stress repetitions. Class 2 is a higher tensile strength product. This specification also covers processing requirements of the springs and forms fabricated from this wire.
HISTORICAL
1994-06-01
Standard
J113_199406
This SAE Recommended Practice covers the mechanical and chemical requirements of hard-drawn carbon-steel spring wire in two classes used for the manufacture of mechanical springs and wire forms generally employed for applications subject to static loads or infrequent stress repetitions. Class 2 is a higher tensile strength product. This specification also covers processing requirements of the springs and forms fabricated from this wire.
CURRENT
1998-06-01
Standard
J113_199806
This SAE Recommended Practice covers the mechanical and chemical requirements of hard-drawn carbon-steel spring wire in two classes used for the manufacture of mechanical springs and wire forms generally employed for applications subject to static loads or infrequent stress repetitions. Class 2 is a higher tensile strength product. This specification also covers processing requirements of the springs and forms fabricated from this wire.
CURRENT
1998-06-01
Standard
J178_199806
This SAE Recommended Practice covers a high quality, hard-drawn, steel spring wire, uniform in mechanical properties, intended for the manufacturer of spring and wire forms subjected to high stresses or requiring good fatigue properties. It covers processing requirements of springs fabricated from this wire.
HISTORICAL
1994-06-01
Standard
J178_199406
This SAE Recommended Practice covers a high quality, hard-drawn, steel spring wire, uniform in mechanical properties, intended for the manufacturer of spring and wire forms subjected to high stresses or requiring good fatigue properties. It covers processing requirements of springs fabricated from this wire.
HISTORICAL
1988-12-01
Standard
J178_198812
This SAE Recommended Practice covers a high quality, hard-drawn, steel spring wire, uniform in mechanical properties, intended for the manufacturer of spring and wire forms subjected to high stresses or requiring good fatigue properties. It covers processing requirements of springs fabricated from this wire.
HISTORICAL
1975-07-01
Standard
J122A_197507
This recommended practice defines, illustrates, and specifies allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of metric-series nuts, in sizes 6.3 to 25 mm and inch-series nuts in sizes 1/4 to 1 in., inclusive, which are primarily intended for use in automotive assemblies.
HISTORICAL
1988-12-01
Standard
J271_198812
This SAE Recommended Practice covers the mechanical and chemical requirements of special quality high tensile, hard-drawn carbon-steel spring wire with restricted size tolerances. This material is used where such restricted dimensional requirements are necessary for the manufacture of highly stressed mechanical springs and wire forms. It is generally employed for applications subject to static loads or infrequent stress repetitions. This document also covers the processing requirements of springs and forms fabricated from this wire.
CURRENT
1998-06-01
Standard
J271_199806
This SAE Recommended Practice covers the mechanical and chemical requirements of special quality high tensile, hard-drawn carbon-steel spring wire with restricted size tolerances. This material is used where such restricted dimensional requirements are necessary for the manufacture of highly stressed mechanical springs and wire forms. It is generally employed for applications subject to static loads or infrequent stress repetitions. This document also covers the processing requirements of springs and forms fabricated from this wire.
HISTORICAL
1994-06-01
Standard
J271_199406
This SAE Recommended Practice covers the mechanical and chemical requirements of special quality high tensile, hard-drawn carbon-steel spring wire with restricted size tolerances. This material is used where such restricted dimensional requirements are necessary for the manufacture of highly stressed mechanical springs and wire forms. It is generally employed for applications subject to static loads or infrequent stress repetitions. This document also covers the processing requirements of springs and forms fabricated from this wire.
HISTORICAL
1976-04-01
Standard
J399A_197604
Automotive parts can be fabricated from either coiled sheet, flat sheet or extruded shapes. Alloy selection is governed by finish requirements, forming characteristics, and mechanical properties. Bright anodizing alloys 5657 and 5252 sheet provide a high luster and are preferred for trim which can be formed from an intermediate temper, such as H25. Bright anodizing alloy 5457 is used for parts which require high elongation and a fully annealed ('0') temper. Alloy 6463 is a medium strength bright anodizing extrusion alloy; Alloy X7016 is a high strength bright anodizing extrusion alloy primarily suited for bumper applications. To satisfy anti-glare requirements for certain trim applications, sheet alloy 5205 and extrusion alloy 6063 are capable of providing the desired low-gloss anodized finish.
CURRENT
1985-02-01
Standard
J399_198502
Automotive parts can be fabricated from either coiled sheet, flat sheet or extruded shapes. Alloy selection is governed by finish requirements, forming characteristics, and mechanical properties. Bright anodizing alloys 5657 and 52521 sheet provide a high luster and are preferred for trim which can be formed from an intermediate temper, such as H25. Bright anodizing alloy 5457 is used for parts which require high elongation and a fully annealed ("0") temper. Alloy 6463 is a medium strength bright anodizing extrusion alloy; Alloy X7016 is a high strength bright anodizing extrusion alloy primarily suited for bumper applications. To satisfy anti-glare requirements for certain trim applications, sheet alloy 5205 and extrusion alloy 6063 are capable of providing the desired low-gloss anodized finish.
HISTORICAL
1988-12-01
Standard
J351_198812
This SAE Recommended Practice covers the physical and chemical requirements of oil- tempered carbon-steel valve spring quality wire used for the manufacture of engine valve springs and other springs requiring high-fatigue properties. This document also covers the processing requirements of springs fabricated from this wire.
HISTORICAL
1994-06-01
Standard
J351_199406
This SAE Recommended Practice covers the physical and chemical requirements of oil- tempered carbon-steel valve spring quality wire used for the manufacture of engine valve springs and other springs requiring high-fatigue properties. This document also covers the processing requirements of springs fabricated from this wire.
CURRENT
1998-06-01
Standard
J351_199806
This SAE Recommended Practice covers the physical and chemical requirements of oil- tempered carbon-steel valve spring quality wire used for the manufacture of engine valve springs and other springs requiring high-fatigue properties. This document also covers the processing requirements of springs fabricated from this wire.
CURRENT
1999-05-20
Standard
J416_199905
When required, unless otherwise specified in the SAE Standards or Recommended Practices, tensile test specimens for metals shall be selected and prepared in accordance with this report. ASTM E 8, Methods of Tension Testing of Metallic Materials, gives more detailed information on tensile testing procedure, and ASTM E 4, Methods of Load Verification of Testing Machines, provides information on testing equipment calibration. In recommending these specimens for use in tensile tests it is not intended to exclude entirely the use of other test specimens for special materials or for special forms of material. It is, however, recommended that these specimens be used wherever it is feasible. Machining of specimens shall be done in such a manner as to avoid leaving severe machining strains in the material. Specimens shall be finished so that the surfaces are smooth and free from nicks and tool marks. All ragged edges shall be smoothed.
CURRENT
1985-02-01
Standard
J474_198502
Electroplating is a process whereby an object is coated with one or more relatively thin, tightly adherent layers of one or more metals. It is accomplished by placing the object to be coated on a plating rack or a fixture, or in a basket or in a rotating container in such a manner that a suitable current may flow through it, and then immersing it in a series of solutions and rinses in planned sequence. The advantage to be gained by electroplating may be considerable; broadly speaking, the process is used when it is desired to endow the basis material (selected for cost, material conservation, and physical property reasons) with surface properties it does not possess. It should be noted that although electroplating is the most widely used process for applying metals to a substrate, they may also be applied by spraying, vacuum deposition, cladding, hot dipping, chemical reduction, mechanical plating, etc.
HISTORICAL
1988-12-01
Standard
J157_198812
This SAE Recommended Practice covers the mechanical and chemical requirements of oil-tempered chromium silicon alloy steel wire used for the manufacture of springs requiring resistance to set when used at moderately elevated temperatures. It also covers the processing requirements of springs fabricated from this wire.
HISTORICAL
1994-06-01
Standard
J157_199406
This SAE Recommended Practice covers the mechanical and chemical requirements of oil-tempered chromium silicon alloy steel wire used for the manufacture of springs requiring resistance to set when used at moderately elevated temperatures. It also covers the processing requirements of springs fabricated from this wire.
CURRENT
1998-06-01
Standard
J157_199806
This SAE Recommended Practice covers the mechanical and chemical requirements of oil-tempered chromium silicon alloy steel wire used for the manufacture of springs requiring resistance to set when used at moderately elevated temperatures. It also covers the processing requirements of springs fabricated from this wire.
CURRENT
1994-08-01
Standard
J172_199408
This SAE Recommended Practice covers the mechanical and chemical requirements of the best quality hard drawn carbon steel spring wire used for the manufacture of engine valve springs and other springs requiring high fatigue properties. It also covers the basic material and processing requirements of springs fabricated from this wire.
HISTORICAL
1988-12-01
Standard
J172_198812
This SAE Recommended Practice covers the mechanical and chemical requirements of the best quality hard drawn carbon steel spring wire used for the manufacture of engine valve springs and other springs requiring high fatigue properties. It also covers the basic material and processing requirements of springs fabricated from this wire.
HISTORICAL
1988-12-01
Standard
J132_198812
This SAE Recommended Practice covers the mechanical and chemical requirements of oil-tempered chromium-vanadium valve spring quality wire used for the manufacture of engine valve springs and other springs used at moderately elevated temperatures and requiring high fatigue properties. It also covers the processing requirements of spring fabricated from this wire.
HISTORICAL
1994-06-01
Standard
J132_199406
This SAE Recommended Practice covers the mechanical and chemical requirements of oil-tempered chromium-vanadium valve spring quality wire used for the manufacture of engine valve springs and other springs used at moderately elevated temperatures and requiring high fatigue properties. It also covers the processing requirements of spring fabricated from this wire.
CURRENT
1998-06-01
Standard
J132_199806
This SAE Recommended Practice covers the mechanical and chemical requirements of oil-tempered chromium-vanadium valve spring quality wire used for the manufacture of engine valve springs and other springs used at moderately elevated temperatures and requiring high fatigue properties. It also covers the processing requirements of spring fabricated from this wire.
CURRENT
1998-06-01
Standard
J316_199806
This SAE Recommended Practice covers the mechanical, chemical, and dimensional requirements of oil-tempered carbon-steel spring wire used in the automotive and related industries. It is especially intended for the manufacture of mechanical springs and wire forms which are not subjected to a large number of high stress cycles. Class I wire is intended for moderate stress and Class II for higher stress level applications. This document also covers the processing requirements for springs fabricated from this wire.
HISTORICAL
1994-06-01
Standard
J316_199406
This SAE Recommended Practice covers the mechanical, chemical, and dimensional requirements of oil-tempered carbon-steel spring wire used in the automotive and related industries. It is especially intended for the manufacture of mechanical springs and wire forms which are not subjected to a large number of high stress cycles. Class I wire is intended for moderate stress and Class II for higher stress level applications. This document also covers the processing requirements for springs fabricated from this wire.
HISTORICAL
1988-12-01
Standard
J316_198812
This SAE Recommended Practice covers the mechanical, chemical, and dimensional requirements of oil-tempered carbon-steel spring wire used in the automotive and related industries. It is especially intended for the manufacture of mechanical springs and wire forms which are not subjected to a large number of high stress cycles. Class I wire is intended for moderate stress and Class II for higher stress level applications. This document also covers the processing requirements for springs fabricated from this wire.
CURRENT
1999-05-01
Standard
J418_199905
This classification for grain size comprises three sets of comparison charts to be used for determining grain size. These charts are presented in three categories as follows: Plate I - Untwinned grains (flat etch) Plate II - Twinned grains (flat etch) Plate IV - Austenite grains in steel (McQuaid-Ehn test or other test) Table 1 lists a number of materials and the comparison charts that are suggested for use in estimating their grain size by the comparison method. NOTEĀ—The suggestions in Table 1 are based upon the customary practices in industry. For specimens prepared according to special techniques, the appropriate comparison chart should be selected on a structural appearance basis as described in the Scope.
CURRENT
1999-05-01
Standard
J408_199905
Viewing 1 to 30 of 209