Refine Your Search

Date

Date

Topic

Topic

Diesel Fuel Injection Equipment Standards Committee Automotive Standard

Search Results

Viewing 1 to 20 of 63
123Next >Last >>
Sort by relevance
Standard

DIESEL ENGINES—DIESEL FUEL—PERFORMANCE REQUIREMENT AND TEST METHOD FOR ASSESSING FUEL LUBRICITY
1995-06-01
HISTORICAL
J2265_199506
This SAE Standard specifies: a test method for assessing the lubricating property of diesel fuels including those which may contain a lubricity enhancing additive, and the performance criteria necessary to ensure reliable operation of diesel fuel injection equipment with respect to fuel lubrication of such equipment. It applies to fuel used in diesel engines.
Standard

Diesel Engines - Diesel Fuel – Performance Requirement and Test Method for Assessing Fuel Lubricity
2015-11-24
CURRENT
J2265_201511
This SAE Standard specifies: a test method for assessing the lubricating property of diesel fuels including those which may contain a lubricity enhancing additive, and the performance criteria necessary to ensure reliable operation of diesel fuel injection equipment with respect to fuel lubrication of such equipment. It applies to fuel used in diesel engines.
Standard

ROAD VEHICLES—HIGH PRESSURE FUEL INJECTION PIPE END—CONNECTIONS WITH 60 DEGREE FEMALE CONE
1988-10-01
HISTORICAL
J1949_198810
This SAE Standard specifies the dimensional requirements for the assembly of high-pressure pipe connections for compression-ignition (diesel) engine fuel injection equipment. It applies to 60 degrees female cones with external threaded connectors types 1 and 2 (see Figures 1, 2, and 3), and to the internal threaded tube nuts and male cone type end assembly (see Figure 4) of high-pressure pipe connections for tubes with diameters up to 12 mm inclusive.
Standard

Road Vehicles - High Pressure Fuel Injection Pipe End - Connections With 60 Degree Female Cone
2015-11-24
CURRENT
J1949_201511
This SAE Standard specifies the dimensional requirements for the assembly of high-pressure pipe connections for compression-ignition (diesel) engine fuel injection equipment. It applies to 60 deg female cones with external threaded connectors types 1 and 2, and to the internal threaded tube nuts and male cone type end assembly of high- pressure pipe connections for tubes with diameters up to 12 mm inclusive.
Standard

DIESEL FUEL INJECTION PUMP—VALIDATION OF CALIBRATING NOZZLE HOLDER ASSEMBLIES
1988-04-01
HISTORICAL
J1549_198804
The fuel injection pump is intended to validate the accuracy of calibrating nozzle and holder assemblies for applications using 0.4 - 0.8 mm diameter orifice plates and to assist in identifying problems in fuel injection pump test stands. This SAE Recommended Practice is divided into two parts: Part I—Design, Description and Specifications of the Fuel Injection Pump; and Part II—Test Procedures for Using the Fuel Injection Pump.
Standard

Diesel Fuel Injection Pump - Validation of Calibrating Nozzle Holder Assemblies
2015-09-22
HISTORICAL
J1549_201509
The fuel injection pump is intended to validate the accuracy of calibrating nozzle and holder assemblies for applications using 0.4 - 0.8 mm diameter orifice plates and to assist in identifying problems in fuel injection pump test stands. This SAE Recommended Practice is divided into two parts: Part I—Design, Description and Specifications of the Fuel Injection Pump; and Part II—Test Procedures for Using the Fuel Injection Pump.
Standard

Diesel Fuel Injection Pump - Validation of Calibrating Nozzle Holder Assemblies
2021-03-17
CURRENT
J1549_202103
The fuel injection pump is intended to validate the accuracy of calibrating nozzle and holder assemblies for applications using 0.4 - 0.8 mm diameter orifice plates and to assist in identifying problems in fuel injection pump test stands. This SAE Recommended Practice is divided into two parts: Part I—Design, Description and Specifications of the Fuel Injection Pump; and Part II—Test Procedures for Using the Fuel Injection Pump.
Standard

Diesel Engines - Fuel Injection Pump Testing
2016-05-10
HISTORICAL
J1668_201605
The correct setting and adjustment of fuel injection pumps requires standardized testing conditions. This SAE Standard summarizes the design and operating parameters for test benches so that, using certain information supplied by the pump manufacturer, the pump test schedule, and certain information supplied by the test bench manufacturer, it can be determined whether a particular test bench is suitable for driving a particular injection pump. This document is in most cases a summary of the ISO Standard 4008, Parts 1, 2, and 3 and is intended to provide its critical aspects. Standard ISO 4008 should be referred to for more details.
Standard

Diesel Engines—Fuel Injection Pump Testing
1999-04-16
HISTORICAL
J1668_199904
The correct setting and adjustment of fuel injection pumps requires standardized testing conditions. This SAE Standard summarizes the design and operating parameters for test benches so that, using certain information supplied by the pump manufacturer, the pump test schedule, and certain information supplied by the test bench manufacturer, it can be determined whether a particular test bench is suitable for driving a particular injection pump. This document is in most cases a summary of the ISO Standard 4008, Parts 1, 2, and 3 and is intended to provide its critical aspects. Standard ISO 4008 should be referred to for more details.
Standard

Diesel Engines - Fuel Injection Pump Testing
2021-03-17
CURRENT
J1668_202103
The correct setting and adjustment of fuel injection pumps requires standardized testing conditions. This SAE Standard summarizes the design and operating parameters for test benches so that, using certain information supplied by the pump manufacturer, the pump test schedule, and certain information supplied by the test bench manufacturer, it can be determined whether a particular test bench is suitable for driving a particular injection pump. This document is in most cases a summary of the ISO Standard 4008, Parts 1, 2, and 3 and is intended to provide its critical aspects. Standard ISO 4008 should be referred to for more details.
Standard

Calibration Fluid for Diesel Injection Equipment
2002-08-29
HISTORICAL
J967_200208
This SAE Standard defines the requirements of a calibration fluid recommended for flow bench testing, calibration, and flushing of fuel injection equipment, in production facilities, in laboratories, and in service establishments.
Standard

CALIBRATION FLUID FOR DIESEL INJECTION EQUIPMENT
1978-04-01
HISTORICAL
J967D_197804
This SAE Standard defines the requirements of a calibration fluid recommended for flow bench testing, calibration, and flushing of fuel injection equipment, in production facilities, in laboratories, and in service establishments.
Standard

Calibration Fluid for Diesel Injection Equipment
2015-12-17
CURRENT
J967_201512
This SAE Standard defines the requirements of a calibration fluid recommended for flow bench testing, calibration, and flushing of fuel injection equipment, in production facilities, in laboratories, and in service establishments.
Standard

CALIBRATION FLUID FOR DIESEL INJECTION EQUIPMENT
1988-09-01
HISTORICAL
J967_198809
This SAE Standard defines the requirements of a calibration fluid recommended for flow bench testing, calibration, and flushing of fuel injection equipment, in production facilities, in laboratories, and in service establishments.
Standard

CALIBRATING FLUID FOR DIESEL FUEL INJECTION SYSTEMS
1975-10-01
HISTORICAL
J967C_197510
This SAE Recommended Practice defines the requirements of a calibrating fluid recommended for the flow bench testing, calibration, and flushing of fuel injection equipment, both in the laboratory and at service establishments.
Standard

CALIBRATION FLUID FOR DIESEL INJECTION EQUIPMENT
1977-08-01
HISTORICAL
J967D_197708
This SAE Standard defines the requirements of a calibration fluid recommended for flow bench testing, calibration, and flushing of fuel injection equipment, in production facilities, in laboratories, and in service establishments.
Standard

Fuel Injection Pumps - High Pressure Pipes (Tubing) for Testing
2015-11-24
CURRENT
J1418_201511
This SAE Standard specifies the dimensional requirement of a range of high pressure pipes for use in the bench testing and setting of fuel injection pumps. Only dimensions and requirements affecting the hydraulic characteristic of the pipes are defined. Other requirements, such as the type of end connections and shape of the pipes when bent, are not included. These depend on the connections provided at pump outlets and injector inlets, and on the design features of individual pumps and test benches.
Standard

FUEL INJECTION PUMPS—HIGH PRESSURE PIPES (TUBING) FOR TESTING
1995-07-10
HISTORICAL
J1418_199507
This SAE Standard specifies the dimensional requirement of a range of high pressure pipes for use in the bench testing and setting of fuel injection pumps. Only dimensions and requirements affecting the hydraulic characteristic of the pipes are defined. Other requirements, such as the type of end connections and shape of the pipes when bent, are not included. These depend on the connections provided at pump outlets and injector inlets, and on the design features of individual pumps and test benches.
123Next >Last >>
X