Search Results

In this paper, the driver ride comfort in a heavy vehicle (city bus) is studied under the sky-hook semi-active damping force policy. A new hybrid dynamic model composed of a continuous system and a discrete system are integrated in the current work. The chassis of the vehicle is assumed as the continuous beam supported on the discrete suspension springs and dampers. The driver and the seat are also considered as a discrete vibrating system. The dynamic equations are solved by using the assumed mode method, where the mode shapes of a free-free beam have been employed. The results of the semi-active system are compared with those of the passive one through simulations. The results indicate that the new hybrid dynamic model represents more degrees-of-freedom of the system for driver ride analysis compared to the discrete model. In addition, the results show that the semi-active system has a superior performance in terms of the ride comfort.

A closed-loop articulated vehicle-driver model, incorporating the path errors, lateral accelerations of the two units and the rate of steering, is proposed to study the directional control behavior of the driver. The closed-loop driver-vehicle model is formulated upon integrating the yaw-plane model of a five-axle articulated vehicle and a comprehensive driver model. The driver model, incorporating the delays associated with the limb movement and muscle activities, is developed with an objective to minimize the lateral acceleration of vehicle, and the lateral position and orientation errors between the previewed and the actual path of the tractor. Various parameters required to describe the driver's contributions are identified through minimizing a weighted performance index subject to an array of limit constraints established from the reported data.

Relative rollover conditions of a heavy vehicle are analyzed to establish an array of potential dynamic rollover indicators towards development of an early warning device. A relative roll instability indicator defined as Roll Safety Factor (RSF) is proposed and shown to be a highly reliable indicator regardless of vehicle configurations and operating conditions. The correlation of various potential rollover indicators with the roll safety factor are then investigated for a 5-axle tractor semi-trailer combination using a comprehensive directional dynamic analysis model to determine the reliability of the proposed indicators over a range of operating conditions. The indicators are further examined in terms of measurability, lead time, and potential for application in an early warning system. The study shows that the trailer lateral acceleration and axle roll angles are closely correlated with the RSF.

The increased number of heavy trucks on today's highways, along with the extended driving hours, resulted in increased demand for improved driving conditions and prompted concern about the dynamic pavement loads. The dynamic pavement loads are one of the major causes of pavement deterioration. Passive suspensions, while being very reliable and easily implementable, fall short of satisfying the various conflicting design requirements. The overwhelming improvement of ride quality resulting from the use of active suspensions seems to have overshadowed their effect on tire generated pavement damage. An in-plane tractor-semitrailer model is used to evaluate the relative performance of fail-safe active and passive suspensions. Both full state feedback and limited state feedback are used in the design of the active suspension.

A covariance analysis technique is proposed to derive the optimal suspension parameters of an articulated freight vehicle. A performance criteria comprising vehicle ride response, suspension deflections and tire deflections related to dynamic wheel loads, is formulated for the 9 degrees-of-freedom (DOF) in-plane model of the vehicle. The range of suspension parameters to achieve four different design requirements is identified and a parametric study is performed to make initial parameter selection using the covariance analysis. The optimal suspension parameters are then identified from the results of the study. The study concludes that the proposed technique can yield the optimal solution in a convenient and highly efficient manner.

The longitudinal load transfer encountered in a partly-filled ellipsoidal tank truck, subject to a straight-line braking maneuver, is investigated as a function of the location of partition walls, deceleration and the fill level. The response characteristics of the truck equipped with a compartmented tank are evaluated in terms of dynamic load transfer, stopping distance, braking time and time lag between the front and rear axle wheel lock-up. The braking response characteristics are derived as a function of the load shift, and number and location of partition walls. Road tests were performed on an airport fuel truck, equipped with a 3 m long tank with two movable partition walls. The simulation results derived from the test vehicle model are compared to the road test data to demonstrate the validity of the analytical model. The results show good correlation with the measured data acquired under straight-line braking maneuvers performed under different fill levels and initial speeds.

In this study, the enhancement of road friendliness of Heavy Goods Vehicle is investigated using two methods to control the resonant forces: (i) Determination of optimal asymmetric force velocity characteristics of the suspension dampers to control the wheel forces corresponding to the resonant modes; (ii) Optimal design of an axle vibration absorber to control the wheel forces corresponding to the unsprung mass resonance mode. An analogy between the dynamic wheel loads and ride quality performance characteristics of heavy vehicles is established through analysis of an in-plane vehicle model. A weighted optimization function comprising the dynamic load coefficient (DLC) and the overall rms vertical acceleration at the driver's location is formulated to determine the design parameters of the damper and absorber for a range of vehicle speeds. The results show that implementation of tuned axle absorbers can lead to reduction in the DLC ranging from 11.5 to 21%.