Criteria

Text:
Display:

Results

Viewing 1 to 30 of 38
CURRENT
2014-09-29
Standard
J1374_201409
Applies to hydraulic seals used to seal the rods of hydraulic cylinders which are components of Off-Road Self-Propelled Work Machines defined in SAE J1116.
HISTORICAL
1985-05-01
Standard
J1374_198505
Applies to hydraulic seals used to seal the rod of hydraulic cylinders which are components of self-propelled work machines defined in SAE J1116.
CURRENT
2003-06-18
Standard
J214_200306
This test procedure describes tests for determining characteristics of hydraulic cylinders as used on construction and industrial mobile machinery as referenced in SAE J1116. In this code, metric equivalents are established according to SAE J916. These characteristics are to be recorded on data sheets similar to the ones shown herein. Two sets of data sheets are to be submitted for each cylinder, one set at 120 °F (49 °C) and one at 180 °F (82 °C).
HISTORICAL
1996-09-01
Standard
J745_199609
This test code describes tests for determining characteristics of hydraulic positive displacement pumps used on construction and industrial machinery as referenced in SAE J 1116. These characteristics are to be recorded on data sheets similar to the ones shown herein. Two sets of data sheets are to be submitted: one at 49 °C (120 °F) and one at 82 °C (180 °F). This test code establishes conditions for pump tests, outlines a procedure for tests, and establishes a method of presenting pump test data. The procedure covers the following determinations: a) derived capacity; b) delivery characteristics; c) power input; d) power loss; e) overall efficiency; f) pressure compensator response and recovery; and g) flow compensator response and recovery.
HISTORICAL
1996-09-01
Standard
J746_199609
This test code describes tests for determining characteristics of hydraulic positive displacement motors as used on construction and industrial machinery as referenced in SAE J1116. These characteristics are to be recorded on data sheets similar to the one shown in Figure 1. Two sets of data sheets are to be submitted: one at 49 °C (120 °F) and one at 82 °C (180 °F). This test code establishes conditions for motor tests, outlines a procedure for tests, and establishes a method of presenting motor test data. The procedures covers the following determinations: a, SAE Volumetric rating; b. SAE running torque characteristics; c. SAE stall torque characteristics; d. Power output; e. Power loss; f. Torque efficiency; g. Overall efficiency
CURRENT
2014-08-05
Standard
J1447_201408
This information report is intended to provide reference material for the selection and use of fire-resistant fluids in the hydraulic systems of off-road work machinery with separate hydraulic oil sump.
HISTORICAL
1986-05-01
Standard
J1447_198605
This information report is intended to provide reference material for the selection and use of fire-resistant fluids in the hydraulic systems of off-road work machinery with separate hydraulic oil sump.
HISTORICAL
1986-03-01
Standard
J748_198603
This SAE Recommended Practice has been set up by Subcommittee 4 of the Off-Road Machinery Technical Committee and is primarily for directional control valves on construction and industrial machinery equipment as referenced in SAE J1116. The purpose is to establish port area to flow relationship and match valve spool eye ends in relation to rated capacity. Port connections are optional for either the 4-bolt split flange connection or the internal straight thread 'O' ring connection.
CURRENT
2014-10-24
Standard
J748_201410
This SAE Recommended Practice has been set up by Subcommittee 4 of the Off-Road Machinery Technical Committee and is primarily for directional control valves on construction and industrial machinery equipment as referenced in SAE J1116. The purpose is to establish port area to flow relationship and match valve spool eye ends in relation to rated capacity. Port connections are optional for either the 4-bolt split flange connection or the internal straight thread "O" ring connection.
HISTORICAL
1986-03-01
Standard
J931_198603
This SAE Information Report is primarily to familiarize the designer of hydraulic powered machinery with the necessity for oil filtration in the hydraulic power circuit, the degree of system cleanliness required, types of filtration and filters available and their location and maintenance in the hydraulic circuit.
CURRENT
2012-08-20
Standard
J931_201208
This SAE Information Report is primarily to familiarize the designer of hydraulic powered machinery with the necessity for oil filtration in the hydraulic power circuit, the degree of system cleanliness required, types of filtration and filters available and their location and maintenance in the hydraulic circuit.
HISTORICAL
1975-06-01
Standard
J931A_197506
This SAE Information Report is primarily to familiarize the designer of hydraulic powered machinery with the necessity for oil filtration in the hydraulic power circuit, the degree of system cleanliness required, types of filtration and filters available and their location and maintenance in the hydraulic circuit.
CURRENT
1986-03-01
Standard
J1117_198603
This procedure applies to hydraulic fluid power valves as applied to self-propelled work machines as referenced in SAE J1116.
HISTORICAL
1980-09-01
Standard
J1117_198009
To provide a uniform procedure for measuring and reporting the pressure losses associated with the significant flow paths in a hydraulic fluid power valve. This procedure applies to hydraulic fluid power valves as applied to self-propelled work machines as referenced in SAE J1116.
HISTORICAL
1975-06-01
Standard
J1117_197506
To provide a uniform procedure for measuring and reporting the pressure losses associated with the significant flow paths in a hydraulic fluid power valve. This procedure applies to hydraulic fluid power valves as applied to self-propelled work machines as referenced in SAE J1116.
HISTORICAL
1986-03-01
Standard
J1165_198603
This SAE Recommended Practice has been formulated to advance and endorse the use of the ISO (International Organization for standardization) Solid Contaminant Code as the universal means for expressing the level of particulate contaminant in hydraulic fluid and for specifying acceptable limits of cleanliness. Worldwide approval was gained for this coding system because it provides a simple, unmistakable, meaningful, and consistent means of communication between suppliers and users. The code applies to all types of hydraulic (liquid) fluids used in fluid power and control systems as applied to self-propelled machines as referenced in J1116. The purpose of this recommended practice is to provide a practical and uniform method for graphically representing the contamination level of a fluid and assigning its proper ISO cleanliness code.
CURRENT
2014-09-29
Standard
J1336_201409
Applies to hydraulic cylinders which are components of Off-Road Self-Propelled Work Machines defined in SAE J1116.
HISTORICAL
1987-06-01
Standard
J1336_198706
Applies to hydraulic cylinders which are components of self-propelled work machines defined in SAE J1116.
HISTORICAL
1990-03-01
Standard
J1333_199003
The purpose of this recommended practice is to provide a laboratory method for determining the capacity of a hydraulic cylinder rod to resist corrosion, and the other cylinder components to withstand that corrosion.
HISTORICAL
2003-10-13
Standard
J1334_200310
Applies to hydraulic cylinders which are components of self-propelled work Machines defined in SAE J1116.
CURRENT
2015-09-25
Standard
J1334_201509
Applies to hydraulic cylinders which are components of Off-Road Work Machines defined in SAE J1116.
HISTORICAL
1998-03-01
Standard
J1614_199803
This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.35 to 19 mm₂ used on off-road, self-propelled earthmoving machines as defined in SAE J1116 and agricultural tractors as defined in ASAE S390.
HISTORICAL
1990-04-01
Standard
J1335_199004
Applies to hydraulic cylinders, which are components of self-propelled work machines defined in SAE J1116.
2016-09-27
WIP Standard
J1117
To provide a uniform procedure for measuring and reporting the pressure losses associated with the significant flow paths in a hydraulic fluid power valve. This procedure applies to hydraulic fluid power valves as applied to self-propelled work machines as referenced in SAE J1116.
HISTORICAL
1996-06-01
Standard
J744_199606
This SAE Standard applies to hydraulic pumps and motors used on off-road self-propelled work machines as described in categories 1 through 5 of SAE J1116 JUN86. The purpose of this standard is to provide a progression of standard mounting flanges and shafts that are dimensionally compatible.
HISTORICAL
1995-11-01
Standard
J744_199511
This SAE Standard applies to hydraulic pumps and motors used on off-road self-propelled work machines as described in categories 1 through 5 of SAE J1116 JUN86. The purpose of this standard is to provide a progression of standard mounting flanges and shafts that are dimensionally compatible.
HISTORICAL
1988-07-01
Standard
J744_198807
This SAE Standard applies to hydraulic pumps and motors used on off-road self-propelled work machines as described in categories 1 through 5 of SAE J1116 JUN86. The purpose of this standard is to provide a progression of standard mounting flanges and shafts that are dimensionally compatible.
HISTORICAL
1983-10-01
Standard
J744_198310
This SAE Standard applies to hydraulic pumps and motors used on off-road self-propelled work machines as described in categories 1 through 5 of SAE J1116 JUN86. The purpose of this standard is to provide a progression of standard mounting flanges and shafts that are dimensionally compatible.
HISTORICAL
1979-06-01
Standard
J1227_197906
To describe laboratory methods for determining and reporting the contaminant level of the wetted portion of hydraulic fluid power components, parts, subsystems and systems, and of fill fluids. For each type of item it provides a method of obtaining the liquid sample and the contamination level thereof. It also includes procedures for establishing a sampling plan and guidelines for establishing levels of acceptance, but does not set those levels. To provide a basis for measuring and reporting cleanliness levels so that built-in contamination and premature failures of hydraulic systems can minimized.
HISTORICAL
1986-03-01
Standard
J1227_198603
To describe laboratory methods for determining and reporting the contaminant level of the wetted portion of hydraulic fluid power components, parts, subsystems and systems, and of fill fluids. For each type of item it provides a method of obtaining the liquid sample and the contamination level thereof. It also includes procedures for establishing a sampling plan and guidelines for establishing levels of acceptance, but does not set those levels. To provide a basis for measuring and reporting cleanliness levels so that built-in contamination and premature failures of hydraulic systems can minimized.
Viewing 1 to 30 of 38