Criteria

Text:
Display:

Results

Viewing 1 to 30 of 37
2007-11-20
Standard
J1013_200711
This SAE Standard defines a method for the measurement of the whole body vibration to which the seated operator of off-highway self-propelled work machines is exposed while performing an actual or simulated operation. It applies to vibration transmitted to the operator through the seat. There are not equivalent ISO Standards. In the main body of this document, conditions are defined for measuring and recording whole body vibration of the seated operator of off-highway self-propelled work machines. The specification of instruments, analytic methods, and description of site and operating conditions allows the measurements to be made and reported with an acceptable precision. The procedure includes means of weighing the vibration level at different frequencies as specified in ISO2631. A standard format for reporting spectral data is recommended. The definitions, instruments, and analytic methods also apply to simulated tests for operator vibration as performed in laboratories.
1992-08-01
Standard
J1013_199208
This SAE Standard defines a method for the measurement of the whole body vibration to which the seated operator of off-highway self-propelled work machines is exposed while performing an actual or simulated operation. It applies to vibration transmitted to the operator through the seat. There are not equivalent ISO Standards. In the main body of this document, conditions are defined for measuring and recording whole body vibration of the seated operator of off-highway self-propelled work machines. The specification of instruments, analytic methods, and description of site and operating conditions allows the measurements to be made and reported with an acceptable precision. The procedure includes means of weighing the vibration level at different frequencies as specified in ISO2631. A standard format for reporting spectral data is recommended. The definitions, instruments, and analytic methods also apply to simulated tests for operator vibration as performed in laboratories.
1980-01-01
Standard
J1013_198001
This SAE Standard defines a method for the measurement of the whole body vibration to which the seated operator of off-highway self-propelled work machines is exposed while performing an actual or simulated operation. It applies to vibration transmitted to the operator through the seat. There are not equivalent ISO Standards. In the main body of this document, conditions are defined for measuring and recording whole body vibration of the seated operator of off-highway self-propelled work machines. The specification of instruments, analytic methods, and description of site and operating conditions allows the measurements to be made and reported with an acceptable precision. The procedure includes means of weighing the vibration level at different frequencies as specified in ISO2631. A standard format for reporting spectral data is recommended. The definitions, instruments, and analytic methods also apply to simulated tests for operator vibration as performed in laboratories.
2007-11-20
Standard
J1386_200711
This Recommended Practice defines classes of tractors having similar characteristics which affect the vibration transmitted to the operator through the operator seat. This recommended practice establishes input data parameters for conducting operator seat vibration tests for various classifications for agricultural wheeled tractors. The classification is intended to aid in the selection of a seat for a specific tractor model and to reduce the amount of testing necessary to determine compliance with applicable standards and/or recommendations. Classification is based on basic configuration and total mass. Instrumentation and measurement procedures are specified in SAE J1013 JAN80. Test procedures are defined in SAE J1384. This document is in compliance with DIS 5007 adopted by ISO/TC23/SC3 October 1984 in Madrid, Spain.
2007-11-20
Standard
J1384_200711
This SAE Standard describes a procedure for the evaluation of operator seats which may be fitted to agricultural wheeled tractors per SAE J1150 and/or earthmoving machines per SAE J1057. This procedure evaluates only the vertical vibration performance and should not be considered a comprehensive seat evaluation procedure.
2003-11-05
Standard
J1385_200311
This SAE Recommended Practice pertains to operator seats for the earthmoving category of off-road self-propelled work machines as defined in SAE J1116 JUN81. This recommended practice defines classes of earthmoving machines having similar characteristics which affect the vibration transmitted to the operator through the operator seat. This recommended practice establishes input data parameters for conducting operator seat vibration tests for the various classes. The purpose is to aid in the selection of an operator seat for a specific machine model and to reduce the amount of testing necessary to determine compliance with applicable standards and/or recommendations. Test procedures are specified in SAE J1384. Instrumentation and measurement procedures are specified in SAE J1013 JAN80.
1983-05-01
Standard
J1384_198305
This SAE Standard describes a procedure for the evaluation of operator seats which may be fitted to agricultural wheeled tractors per SAE J1150 and/or earthmoving machines per SAE J1057. This procedure evaluates only the vertical vibration performance and should not be considered a comprehensive seat evaluation procedure.
1993-06-22
Standard
J1384_199306
This SAE Standard describes a procedure for the evaluation of operator seats which may be fitted to agricultural wheeled tractors per SAE J1150 and/or earthmoving machines per SAE J1057. This procedure evaluates only the vertical vibration performance and should not be considered a comprehensive seat evaluation procedure.
1978-06-01
Standard
J1225_197806
The purpose of this report is to record the activities and recommendations of the Ride Meter Task Force assigned by the chairman of the SAE Joint Seating Subcommittee to determine availability of instrumentation to measure operator ride on mobile equipment. The desired characteristics of the meter included relatively low cost, easy to operate, highly portable, and sufficiently rugged to withstand the vibration levels encountered on agricultural or construction machines. It is recognized that a ride meter type instrument with a single numerical output provides only approximate indication of ride vibration quality, but is useful for general field evaluation or overall ride comparisons. A narrow band analysis of the vibration frequency spectrum is recommended for more accurate and complete results.
1987-01-30
Standard
J1225_198701
The purpose of this report is to record the activities and recommendations of the Ride Meter Task Force assigned by the chairman of the SAE Joint Seating Subcommittee to determine availability of instrumentation to measure operator ride on mobile equipment. The desired characteristics of the meter included relatively low cost, easy to operate, highly portable, and sufficiently rugged to withstand the vibration levels encountered on agricultural or construction machines. It is recognized that a ride meter type instrument with a single numerical output provides only approximate indication of ride vibration quality, but is useful for general field evaluation or overall ride comparisons. A narrow band analysis of the vibration frequency spectrum is recommended for more accurate and complete results.
2013-08-05
Standard
J1051_201308
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
1988-12-01
Standard
J1051_198812
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
2002-12-18
Standard
J1051_200212
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
2008-04-11
Standard
J1051_200804
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
1980-01-01
Standard
J1163_198001
This SAE standard specifies a method and the device for use in determining the position of the Seat Index Point (SIP) for any kind of seat. This SAE document provides a uniform method for defining the location of the SIP in relation to some fixing point on the seat.
1976-10-01
Standard
J1163_197610
This SAE standard specifies a method and the device for use in determining the position of the Seat Index Point (SIP) for any kind of seat. This SAE document provides a uniform method for defining the location of the SIP in relation to some fixing point on the seat.
1991-06-01
Standard
J1163_199106
This SAE standard specifies a method and the device for use in determining the position of the Seat Index Point (SIP) for any kind of seat. This SAE document provides a uniform method for defining the location of the SIP in relation to some fixing point on the seat.
2012-05-17
Standard
J1163_201205
This SAE Standard specifies a method and the device for use in determining the position of the Seat Index Point (SIP) for any kind of seat.
2006-12-04
Standard
J1163_200612
This SAE standard specifies a method and the device for use in determining the position of the Seat Index Point (SIP) for any kind of seat. This SAE document provides a uniform method for defining the location of the SIP in relation to some fixing point on the seat.
2016-08-02
Standard
J1163_201608
This SAE Standard specifies a method and the device for use in determining the position of the Seat Index Point (SIP) for any kind of seat.
2007-05-07
Standard
J899_200705
This SAE Standard provides seat dimensions and adjustments for the design of operator's seat.
1980-10-01
Standard
J899_198010
This SAE Standard provides seat dimensions and adjustments for the design of operator's seat.
2017-08-03
WIP Standard
J899
This SAE Standard provides seat dimensions and adjustments for the design of operator's seat.
2012-05-17
Standard
J899_201205
For off-road work machines as listed in SAE J1116.
1986-01-01
Standard
J1454_198601
This SAE Standard describes a laboratory test procedure for comparatively evaluating the durability and fatigue life qualities of a complete seat cushion by submitting the seating surface of the cushion to repetitive compressive and rotational loading with a simulated human buttocks. This document provides a uniform method of dynamically testing the durability of seat cushions on a comparative basis.
2006-05-31
Standard
J1454_200605
This SAE Standard describes a laboratory test procedure for comparatively evaluating the durability and fatigue life qualities of a complete seat cushion by submitting the seating surface of the cushion to repetitive compressive and rotational loading with a simulated human buttocks. This document provides a uniform method of dynamically testing the durability of seat cushions on a comparative basis.
2012-05-17
Standard
J1454_201205
This SAE Standard describes a laboratory test procedure for comparatively evaluating the durability and fatigue life qualities of a complete seat cushion by submitting the seating surface of the cushion to repetitive compressive and rotational loading with a simulated human buttocks.
2017-08-08
Standard
J1454_201708
This SAE Standard describes a laboratory test procedure for comparatively evaluating the durability and fatigue life qualities of a complete seat cushion by submitting the seating surface of the cushion to repetitive compressive and rotational loading with a simulated human buttocks.
2006-12-04
Standard
J2292_200612
This SAE Information Report provides performance and test requirements for combination pelvic/ upper torso operator restraint systems provided for off-road self-propelled work machines.
2016-01-14
Standard
J2292_201601
This SAE Recommended Practice establishes minimum performance and test requirements for combination pelvic and upper torso occupant restraint systems provided for off-road self-propelled work machines.
Viewing 1 to 30 of 37