Criteria

Text:
Display:

Results

Viewing 1 to 30 of 98
2011-10-27
Standard
J1580_201110
this document is to be used on cutting edges and end bits in conjunction with metric bolts (reference ISO 7852-1982) typically used on off-road, self-propelled work machines as described in SAE J1116. The cutting edges are further defined in SAE J737, J739, J1304, and J1581. The end bits are further defined in SAE J63.
1989-12-01
Standard
J1580_198912
This document is to be used on cutting edges and end bits in conjunction with metric bolts (Reference ISO 7852-1982) typically used on off-road, self-propelled work machines as described in SAE J1116. The cutting edges are further defined in SAE J737, J739, J1304, and J1581. The end bits are futher defined in SAE J63. This document specifies the principle shapes and dimensions for countersunk square holes.
2002-10-31
Standard
J1197_200210
This SAE Recommended Practice applies to wheel and crawler loaders when equipped with log or material handling forks without vertical masts, taking only hydraulic lift capacity and operating stability into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions would require more careful or restricted operation with the rated operating load. This practice is not to be construed as setting up test procedures or conditions.
2003-05-08
Standard
J874_200305
This SAE Standard specifies a method for determining the coordinates of the center of gravity of earthmoving machinery such as tractors, loaders, dumpers, and graders in any condition of loading or position of attachments.
1985-10-01
Standard
J874_198510
This SAE Standard specifies a method for determining the coordinates of the center of gravity of earthmoving machinery such as tractors, loaders, dumpers, and graders in any condition of loading or position of attachments.
1986-03-01
Standard
J874_198603
This SAE Standard specifies a method for determining the coordinates of the center of gravity of earthmoving machinery such as tractors, loaders, dumpers, and graders in any condition of loading or position of attachments.
1977-06-01
Standard
J874A_197706
This SAE Standard specifies a method for determining the coordinates of the center of gravity of earthmoving machinery such as tractors, loaders, dumpers, and graders in any condition of loading or position of attachments.
2006-02-05
Standard
J740_200602
This standard specifies the principal shapes and dimensions for countersunk square holes. To be used on cutting edges and end bits in conjunction with No. 3 head plow bolts (Ref. ANSI B18.9) typically used on off-road self-propelled work machines as described in SAE J1116. Cutting edges are further in SAE J737, J739 and J1304. End bits are further defined in SAE J63.
2011-10-25
Standard
J740_201110
To be used on cutting edges and end bits in conjunction with No. 3 head plow bolts (Ref. ANSI B18.9) typically used on off-road self-propelled work machines as described in SAE J1116. Cutting edges are further defined in SAE J737, J739 and J1304. End bits are further defined in SAE J63. When section thickness exceeds A in drawing 1 (Figure 2) (countersunk one side) or B in drawing 4 (countersunk both sides), use counterbore with diameter D, as shown in cross section drawings 2, 5 and 6, or extended countersink C, as shown in cross section drawings 3 and 7. The inscribed circle of the square holes shall be concentric with countersink or counterbore within 0.03 in (0.8 mm).
2007-08-30
Standard
J739_200708
This SAE Standard is intended for curved cutting edge sections used on graders as defined in SAE J870 and J1057. (See Figure 1 and Table 1.) Hole conformation is further defined in SAE J740 and J1580. This document specifes hole placement along the length and width of the cutting edge and dimensions for cutting edge cross sections. See Table 1.
2002-02-21
Standard
J733_200202
This Standard is to establish identification terminology for major components and parts used in the ripping operation on earthmoving machines. The components and parts illustrated are attached to certain self-propelled earthmoving machines and/or attachments as defined in SAE J326, J727, J729, J870 and J1193.
1986-06-01
Standard
J739_198606
This SAE Standard is intended for curved cutting edge sections used on graders as defined in SAE J870 and J1057. (See Figure 1 and Table 1.) Hole conformation is further defined in SAE J740 and J1580. This document specifes hole placement along the length and width of the cutting edge and dimensions for cutting edge cross sections. See Table 1.
2002-02-21
Standard
J749_200202
This SAE Standard provides recommended dimensions for drawbars for crawler tractors as defined in SAE J1057 (SEP88). It includes only those dimensions which will affect the attaching of towed equipment.
1983-12-01
Standard
J749_198312
This SAE Standard provides recommended dimensions for drawbars for crawler tractors as defined in SAE J1057 (SEP88). It includes only those dimensions which will affect the attaching of towed equipment.
1984-12-01
Standard
J1016_198412
This SAE Standard provides names of major components peculiar to dumpers as defined in SAE J1057 (See Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine. For component nomenclature for dumper trailers, refere to SAE J734.
1986-01-01
Standard
J1017_198601
This SAE Standard provides names of major components peculiar to rollers and compactors. Illustrations of components are not intended to be exactly descriptive of any particular machine. NOTE: Rollers and compactors will be defined in a section added to SAE J1057a.
2000-06-28
Standard
J1016_200006
This SAE Standard provides names of major components peculiar to dumpers as defined in SAE J1057 (See Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine. For component nomenclature for dumper trailers, refere to SAE J734.
2011-10-27
Standard
J1017_201110
This SAE Standard provides names of major components peculiar to rollers and compactors. Illustrations of components are not intended to be exactly descriptive of any particular machine. NOTE: Rollers and compactors will be defined in a section added to SAE J1057a.
1981-06-01
Standard
J1360_198106
This standard has been established for the development and implementation of a product identification numbering system. This standard covers off-road, self-propelled work machines (agricultural, construction, forestry, industrial, and mining) as categorized in SAE J1116.
2006-02-05
Standard
J1360_200602
This standard has been established for the development and implementation of a product identification numbering system. This standard covers off-road, self-propelled work machines (agricultural, construction, forestry, industrial, and mining) as categorized in SAE J1116.
2004-10-18
Standard
J1464_200410
This SAE Recommended Practice defines machines equipped with forks for material handling, which are intended for use on unimproved or disturbed terrain. (Reference J1116, Categories 1, 2 or 6.) Purpose To identify types of machines, which use forks as working tools, while being used on unimproved surfaces. The machines are grouped as follows: loaders/tractors with forks and rough terrain forklifts. These groupings are used in identifying the organization responsible for applicable standards.
2003-05-08
Standard
J1363_200305
This SAE Standard applies to dumper bodies as defined in SAE J1016 and dumper trailers as defined in SAE J734. It is similar to ISO 6483. Purpose The purpose of this document is to provide a uniform method for calculating the SAE rated volumetric capacity.
1985-01-01
Standard
J1363_198501
This SAE Standard applies to dumper bodies as defined in SAE J1016 and dumper trailers as defined in SAE J734. It is similar to ISO 6483. Purpose The purpose of this document is to provide a uniform method for calculating the SAE rated volumetric capacity.
2013-08-21
Standard
J1360_201308
This standard covers self-propelled off-road work machines as categorized in SAE J1116 and Agricultural Tractors as defined in ANSI/ASAE S390.
2006-02-05
Standard
J1581_200602
The purpose of this SAE Recommended Practice is to specify dimensions for loader straight cutting edge cross sections without holes and with bolt holes for mounting bolt-on teeth and tooth adapters on loader buckets described by SAE J731. This recommended practice is intended to supplement SAE J1303 and SAE J1304 with cross sections for heavier duty applications, by identifying larger blunts, greater bevel angles, larger bolt holes, and greater bolt spacing.
2011-10-25
Standard
J1581_201110
The purpose of this SAE Recommended Practice is to specify dimensions for loader straight cutting edge cross sections without holes and with bolt holes for mounting bolt-on teeth and tooth adaptors on loader buckets described by SAE J731. This recommended practice is intended to supplement SAE J1303 and SAE J1304 with cross sections for heavier duty applications, by identifying larger blunts, greater bevel angles, larger bolt holes, and greater bolt spacing.
1980-02-01
Standard
J63_198002
The recommended practice applies to straight blade, angling blade, U blade, and semi-U blades used on earthmoving tractors per SAE J1057a up to a maximum weight of 100,000 lb (45,000 kg).
1998-05-01
Standard
J63_199806
The recommended practice applies to straight blade, angling blade, U blade, and semi-U blades used on earthmoving tractors per SAE J1057a up to a maximum weight of 100,000 lb (45,000 kg).
1977-06-01
Standard
J727B_197706
This Standard provides provides names of major components peculiar to crawler tractors as defined in SAE J1057a (June, 1975). Illustrations of components are not intended to be exactly descriptive of any particular machine.
2002-02-21
Standard
J727_200202
This Standard provides provides names of major components peculiar to crawler tractors as defined in SAE J1057a (June, 1975). Illustrations of components are not intended to be exactly descriptive of any particular machine.
Viewing 1 to 30 of 98