Criteria

Text:
Display:

Results

Viewing 1 to 30 of 36
HISTORICAL
2006-01-09
Standard
J2321/3_200601
This specification sheet establishes requirements for high collapse pressure configuration filter elements of several configurations with a minimum filtration ratio of 75 for particles larger than 10 µm when designed and tested in accordance with SAE J2321 and this specification sheet.
CURRENT
2002-12-13
Standard
J2321_200212
This SAE Standard covers disposable hydraulic and lube oil filter elements. This document is a general performance specification for filter elements and identifies performance criteria and test methods. Associated specification sheets (SAE J2321-1, J2321-2, and J2321-3, etc.) define configuration and performance requirements for specific elements.
CURRENT
2013-05-31
Standard
J2321/3_201305
This specification sheet establishes requirements for high collapse pressure configuration filter elements of several configurations with a minimum filtration ratio of 75 for particles larger than 10 µm when designed and tested in accordance with SAE J2321 and this specification sheet.
2012-09-24
WIP Standard
J2321
This SAE Standard covers disposable hydraulic and lube oil filter elements. This document is a general performance specification for filter elements and identifies performance criteria and test methods. Associated specification sheets (SAE J2321-1, J2321-2, and J2321-3, etc.) define configuration and performance requirements for specific elements.
2014-10-27
WIP Standard
J1783
This SAE Recommended Practice provides the designer with guidance for the selection of directional control valves for use in the hydraulic systems of surface ships and submersibles. This guidance includes use of standard valves and interfaces, minimum envelopes that should be reserved to permit interchangeability, environmental considerations, and general technical requirements.
HISTORICAL
2002-03-28
Standard
J1783_200203
This SAE Recommended Practice provides the designer with guidance for the selection of directional control valves for use in the hydraulic systems of surface ships and submersibles. This guidance includes use of standard valves and interfaces, minimum envelopes that should be reserved to permit interchangeability, environmental considerations, and general technical requirements.
CURRENT
2013-05-31
Standard
J1783_201305
This SAE Recommended Practice provides the designer with guidance for the selection of directional control valves for use in the hydraulic systems of surface ships and submersibles. This guidance includes use of standard valves and interfaces, minimum envelopes that should be reserved to permit interchangeability, environmental considerations, and general technical requirements.
CURRENT
2000-08-20
Standard
J1784_200008
This document lists military and industry specifications and standards that are considered to be of particular interest to designers of marine vehicle hydraulic systems. SAE AIR737 lists additional aerospace hydraulic documents which occasionally may have application in marine hydraulic systems. This report is intended to assist marine hydraulic system designers in identifying military and industry specifications and standards that are suitable for use in marine hydraulic systems. The documents are listed according to specific categories and components. Documents that can be identified with more than one category are listed accordingly. The user is cautioned to use the latest revision of each document and to review the document carefully to determine the suitability of the document for the particular applications.
2013-07-02
WIP Standard
J2333
This SAE Recommended Practice identifies and examines the various parameters which must be considered in selecting hydraulic systems filters, their locations within the system and the dirt capacity of the filter elements. This document is generally applicable to all ship hydraulic systems but does not apply to personal or recreational watercraft.
CURRENT
2013-05-31
Standard
J2333_201305
This SAE Recommended Practice identifies and examines the various parameters which must be considered in selecting hydraulic system filters, their locations within the system and the dirt capacity of the filter elements.
HISTORICAL
2004-09-09
Standard
J2333_200409
This SAE Recommended Practice identifies and examines the various parameters which must be considered in selecting hydraulic systems filters, their locations within the system and the dirt capacity of the filter elements. This document is generally applicable to all ship hydraulic systems but does not apply to personal or recreational watercraft.
2015-08-21
WIP Standard
J2470
This SAE Recommended Practice defines a procedure, which will aid in assessing the contaminant sensitivity of hydraulic valves. The approach taken defines a test procedure with flexibility for testing valves in a wide range of contamination levels. The user of this procedure must establish the contamination levels for testing. Three levels are suggested which should cover the range for most valve applications. This procedure does not establish the contaminant sensitivity requirements for any valve. The user of this procedure needs to be aware of the system contamination level that the valve will operate in and select test contamination levels significantly higher than the operating level to assess the suitability of the valve. The test procedure permits a valve to be tested without disassembly and therefore permits protection of proprietary design information. This procedure assesses the contamination sensitivity of valves by contaminant lock.
CURRENT
2001-10-26
Standard
J24714_200110
This SAE Standard identifies the material and dimensional requirements for component connector tubes and related items for use in fluid power components. Connector tubes are also identified as quills, ferrules or transfer tubes. Connector tubes are used to connect fluid passages within a component or to connect one component to another; for example, connecting control valves to subplates. Related items include plugs, undrilled connector tubes and connector tubes for internal check valves and restrictors.
2015-10-28
WIP Standard
J24714
This SAE Standard identifies the material and dimensional requirements for component connector tubes and related items for use in fluid power components. Connector tubes are also identified as quills, ferrules or transfer tubes. Connector tubes are used to connect fluid passages within a component or to connect one component to another; for example, connecting control valves to subplates. Related items include plugs, undrilled connector tubes and connector tubes for internal check valves and restrictors.
CURRENT
2009-01-22
Standard
J2470_200901
This SAE Recommended Practice defines a procedure, which will aid in assessing the contaminant sensitivity of hydraulic valves. The approach taken defines a test procedure with flexibility for testing valves in a wide range of contamination levels. The user of this procedure must establish the contamination levels for testing. Three levels are suggested which should cover the range for most valve applications. This procedure does not establish the contaminant sensitivity requirements for any valve. The user of this procedure needs to be aware of the system contamination level that the valve will operate in and select test contamination levels significantly higher than the operating level to assess the suitability of the valve. The test procedure permits a valve to be tested without disassembly and therefore permits protection of proprietary design information.
HISTORICAL
2006-11-13
Standard
J2470_200611
This SAE Recommended Practice defines a procedure, which will aid in assessing the contaminant sensitivity of hydraulic valves. The approach taken defines a test procedure with flexibility for testing valves in a wide range of contamination levels. The user of this procedure must establish the contamination levels for testing. Three levels are suggested which should cover the range for most valve applications. This procedure does not establish the contaminant sensitivity requirements for any valve. The user of this procedure needs to be aware of the system contamination level that the valve will operate in and select test contamination levels significantly higher than the operating level to assess the suitability of the valve. The test procedure permits a valve to be tested without disassembly and therefore permits protection of proprietary design information. This procedure assesses the contamination sensitivity of valves by contaminant lock.
CURRENT
1991-04-01
Standard
J1780_199104
This document establishes the requirements for technical content and format of hydraulic system diagrams. This document does not establish configuration requirements, material, or performance requirements for any system or component identified herein.
CURRENT
2013-05-30
Standard
J1781_201305
The scope of this Recommended Practice is to delineate groups of materials for which there is considerable fabrication and operating experience in the sea water environment. In addition, some of the more promising materials for possible future applications are covered.
HISTORICAL
2006-11-22
Standard
J1781_200611
The scope of this Recommended Practice is to delineate groups of materials for which there is considerable fabrication and operating experience in the sea water environment. In addition, some of the more promising materials for possible future applications are covered. The purpose of this Recommended Practice is to define materials for use in fluid systems of marine vehicles, including submersibles and advanced surface craft. This report is more particularly directed to the designer of fluid power and piping systems on board marine vehicles.
HISTORICAL
2006-11-13
Standard
J1782_200611
Hydraulic systems are used on marine vehicles for steering, vehicle control, and utility services. System components that generate and transmit noise are of concern. This SAE Information Report (a) addresses noise requirements which may apply to the hydraulic systems of ships and submersibles, and (b) identifies noise sources and techniques which may be used to reduce system noise. Noise of power sources (e.g., electric motors) and end items (e.g., steering linkages) is beyond the scope of this document.
CURRENT
2013-05-31
Standard
J1782_201305
Hydraulic systems are used on marine vehicles for steering, vehicle control, and utility services. System components that generate and transmit noise are of concern. This SAE Information Report (a) addresses noise requirements which may apply to the hydraulic systems of ships and submersibles, and (b) identifies noise sources and techniques which may be used to reduce system noise. Noise of power sources (e.g., electric motors) and end items (e.g., steering linkages) is beyond the scope of this document.
CURRENT
2014-02-21
Standard
J1776_201402
This SAE Recommended Practice provides guidance for defining the requirements for evaluating hydraulic pumps and motors and for preparing detailed specifications for these components. The user can follow this document to set forth the pump and motor environmental and performance considerations, establish service life and reliability goals, and define specific evaluation tests for marine vehicle applications.
HISTORICAL
2005-05-13
Standard
J1776_200505
This SAE Recommended Practice provides guidance defining the hydraulic system requirements and for preparing a detailed specification for a pumping component. The user can follow this document to set forth the pump environmental and performance considerations, establish service life and reliability goals, and define specific evaluation tests in order to qualify it for advanced marine vehicle applications.
2011-06-17
WIP Standard
J1778
This SAE Recommended Practice identifies general requirements for hydraulic fluids to be used for ship systems and equipment with respect to power transmission, lubrication, and passive applications. It also indicates the environmental limits within which the fluids shall perform their intended purpose satisfactorily and reliably. Characteristics of particular importance to ship systems and equipment are discussed.
CURRENT
2006-11-13
Standard
J1778_200611
This SAE Recommended Practice identifies general requirements for hydraulic fluids to be used for ship systems and equipment with respect to power transmission, lubrication, and passive applications. It also indicates the environmental limits within which the fluids shall perform their intended purpose satisfactorily and reliably. Characteristics of particular importance to ship systems and equipment are discussed.
2012-09-17
WIP Standard
J1780
This document establishes the requirements for technical content and format of hydraulic system diagrams. This document does not establish configuration requirements, material, or performance requirements for any system or component identified herein. The purpose of this document is to specify the minimum technical content of marine and submergence vehicle hydraulic system diagrams and provide a standard format. Diagrams prepared in accordance with this document will be suitable for use in procurement activity, shipboard installation, and technical manuals for use in troubleshooting, operation, and maintenance of the hydraulic system.
CURRENT
2013-05-31
Standard
J2321/2_201305
This specification sheet establishes requirements for a high collapse pressure configuration filter element of a specific configuration with a minimum filtration ratio of 75 for particles larger than 7 µm when designed and tested in accordance with SAE J2321 and this specification sheet.
HISTORICAL
2006-01-09
Standard
J2321/2_200601
This specification sheet establishes requirements for a high collapse pressure configuration filter element of a specific configuration with a minimum filtration ratio of 75 for particles larger than 7 µm when designed and tested in accordance with SAE J2321 and this specification sheet.
HISTORICAL
2006-01-09
Standard
J2321/1_200601
This specification sheet establishes requirements for low collapse pressure elements of a specific configuration with various efficiency ratings designed and tested in accordance with SAE J2321 and the requirements of this specification sheet.
CURRENT
2013-05-31
Standard
J2321/1_201305
This specification sheet establishes requirements for low collapse pressure elements of a specific configuration with various efficiency ratings designed and tested in accordance with SAE J2321 and the requirements of this specification sheet.
Viewing 1 to 30 of 36