Criteria

Text:
Display:

Results

Viewing 1 to 30 of 43
CURRENT
1996-05-01
Standard
J2255_199605
This SAE Recommended Practice provides instructions and test procedures for measuring air consumption of air braked vehicles equipped with Antilock Brake Systems (ABS) used on highways.
2013-04-08
WIP Standard
J225
This SAE Recommended Practice provides a field test procedure and instructions for: Instrumentation and Equipment Vehicle Preparation Test of air-braked single and combination vehicles Calculation of brake force distribution This test procedure is intended to be used as a field procedure. If a more refined method, utilizing laboratory equipment, is required, refer to SAE J1505. Purpose This procedure provides a method to determine the brake force distribution (brake system effectiveness) for trucks and buses with a GVWR greater than 4536 kg (10 000 lb).
HISTORICAL
1971-05-01
Standard
J786A_197105
This SAE Recommended Practice establishes a uniform procedure for the level road test of the brake systems of new trucks, buses, and combination of vehicles designed for roadway use and falling in the following classifications: Light trucks and buses: 6001–10,000 lb (2700–4500 kg) gvw Truck and bus: Over 10,000 lb (4500 kg) gvw Combination of vehicles (towing vehicle over 10,000 lb (4500 kg) gvw)
CURRENT
1998-12-01
Standard
J786A_199812
This SAE Recommended Practice establishes a uniform procedure for the level road test of the brake systems of new trucks, buses, and combination of vehicles designed for roadway use and falling in the following classifications: Light trucks and buses: 6001–10,000 lb (2700–4500 kg) gvw Truck and bus: Over 10,000 lb (4500 kg) gvw Combination of vehicles (towing vehicle over 10,000 lb (4500 kg) gvw)
CURRENT
2003-04-29
Standard
J225_200304
This SAE Recommended Practice provides a field test procedure and instructions for: Instrumentation and Equipment Vehicle Preparation Test of air-braked single and combination vehicles Calculation of brake force distribution This test procedure is intended to be used as a field procedure. If a more refined method, utilizing laboratory equipment, is required, refer to SAE J1505.
HISTORICAL
1988-08-01
Standard
J225_198808
This SAE Recommended Practice provides a field test procedure and instructions for: Instrumentation and Equipment Vehicle Preparation Test of air-braked single and combination vehicles Calculation of brake force distribution This test procedure is intended to be used as a field procedure. If a more refined method, utilizing laboratory equipment, is required, refer to SAE J1505. Purpose This procedure provides a method to determine the brake force distribution (brake system effectiveness) for trucks and buses with a GVWR greater than 4536 kg (10 000 lb).
HISTORICAL
1971-01-01
Standard
J225_197101
This SAE Recommended Practice provides a field test procedure and instructions for: Instrumentation and Equipment Vehicle Preparation Test of air-braked single and combination vehicles Calculation of brake force distribution This test procedure is intended to be used as a field procedure. If a more refined method, utilizing laboratory equipment, is required, refer to SAE J1505. Purpose This procedure provides a method to determine the brake force distribution (brake system effectiveness) for trucks and buses with a GVWR greater than 4536 kg (10 000 lb).
2017-05-02
WIP Standard
J2255
This SAE Recommended Practice provides instructions and test procedures for measuring air consumption of air braked vehicles equipped with Antilock Brake Systems (ABS) used on highways. This document provides a method to determine the air consumption of highway vehicles when the brake system must maintain performance when the service brake control is applied for long periods of time.
2011-02-09
WIP Standard
J2963
Provide previous stop light activation research into single document for future reference.
CURRENT
2011-11-09
Standard
J2536_201111
Test procedure for Anti-Lock brake system (ABS/Anti-Lock) performance for trucks, truck-tractors and buses over 4536 kg (10 000 lb).
HISTORICAL
2004-01-09
Standard
J2536_200401
Test procedure for Anti-Lock brake system (ABS/Anti-Lock) performance for trucks, truck-tractors and buses over 4536 kg (10 000 lb).
HISTORICAL
1985-05-01
Standard
J1505_198505
This SAE Recommended Practice provides the test procedure and instructions for air braked single unit trucks, buses, and combination vehicles. It also provides recommendations for: a. Instrumentation and equipment b. Vehicle preparation c. Calculating distribution of brake force This procedure provides a method to determine the brake force distribution and threshold pressures for trucks and buses with a GVWR greater than 4536 kg (10 000 lb).
CURRENT
2011-07-13
Standard
J1505_201107
This SAE Recommended Practice provides the test procedure and instructions for air braked single unit trucks, buses, and combination vehicles. It also provides recommendations for: Instrumentation and equipment Vehicle preparation Calculating distribution of brake force
HISTORICAL
2004-04-21
Standard
J1505_200404
This SAE Recommended Practice provides the test procedure and instructions for air braked single unit trucks, buses, and combination vehicles. It also provides recommendations for: a. Instrumentation and equipment b. Vehicle preparation c. Calculating distribution of brake force This procedure provides a method to determine the brake force distribution and threshold pressures for trucks and buses with a GVWR greater than 4536 kg (10 000 lb).
HISTORICAL
2003-07-07
Standard
J2378_200307
This SAE Recommended Practice provides instructions and test procedures for air braked trailers and dollies used in single and multiple trailer combinations on highway. This document is not intended for off-highway application. Purpose This document provides a method of determining the efficiency of trailer and dolly air supply systems in filling reservoirs and, for those with spring applied parking brakes, in releasing parking brakes.
HISTORICAL
2011-03-16
Standard
J2580_201103
This Recommended Practice covers air braked trucks, truck-tractors, trailers and buses. It enumerates the identification and installation of the air brake components not covered in other SAE recommended practices and standards.
HISTORICAL
2005-01-25
Standard
J2580_200501
This Recommended Practice covers air braked trucks, truck-tractors, trailers and buses. It enumerates the identification and installation of the air brake components not covered in other SAE recommended practices and standards.
CURRENT
2016-11-01
Standard
J2580_201611
This Recommended Practice covers air braked trucks, truck-tractors, trailers and buses. It enumerates the identification and installation of the air brake components not covered in other SAE recommended practices and standards.
CURRENT
2014-11-20
Standard
J2378_201411
This SAE Recommended Practice provides instructions and test procedures for air braked trailers and dollies used in single and multiple trailer combinations on highway. This document is not intended for off-highway application.
HISTORICAL
2010-08-18
Standard
J2378_201008
This SAE Recommended Practice provides instructions and test procedures for air braked trailers and dollies used in single and multiple trailer combinations on highway. This document is not intended for off-highway application. Purpose This document provides a method of determining the efficiency of trailer and dolly air supply systems in filling reservoirs and, for those with spring applied parking brakes, in releasing parking brakes.
CURRENT
1998-12-23
Standard
J992_199812
This SAE Recommended Practice presents performance requirements for the brake systems of motor vehicles intended for roadway use and falling into the following classifications: Light trucks and buses: 6001-10 000 lb (2700-4500 kg) gvw; Truck and bus: Over 10 000 lb (4500 kg) gvw; combination of vehicles towing vehicles over 10 000 lb (4500 kg) gvw. Acceptable performance requirements are based on data obtained from applicable sections of SAE J786a (March, 1978). The purpose of this recommended practice is to establish the minimum brake system performance requirements with regard to: 3.1 Stopping ability--of cold brakes, as affected by vehicle speed. 3.2 Stopping ability--of hot brakes, as affected by vehicle speed and duty cycle. 3.3 Pedal force (air pressure) requirements--maximum allowable. 3.4 Brake stability. 3.5 stopping ability and recovery of wet brakes. 3.6 Stopping ability of emergency brake system. 3.7 Brake effectiveness distribution for vehicles in combination.
HISTORICAL
1978-03-01
Standard
J992B_197803
This SAE Recommended Practice presents performance requirements for the brake systems of motor vehicles intended for roadway use and falling into the following classifications: Light trucks and buses: 6001-10 000 lb (2700-4500 kg) gvw; Truck and bus: Over 10 000 lb (4500 kg) gvw; combination of vehicles towing vehicles over 10 000 lb (4500 kg) gvw. Acceptable performance requirements are based on data obtained from applicable sections of SAE J786a (March, 1978). The purpose of this recommended practice is to establish the minimum brake system performance requirements with regard to: 3.1 Stopping ability--of cold brakes, as affected by vehicle speed. 3.2 Stopping ability--of hot brakes, as affected by vehicle speed and duty cycle. 3.3 Pedal force (air pressure) requirements--maximum allowable. 3.4 Brake stability. 3.5 stopping ability and recovery of wet brakes. 3.6 Stopping ability of emergency brake system. 3.7 Brake effectiveness distribution for vehicles in combination.
HISTORICAL
1971-05-01
Standard
J992B_197105
This SAE Recommended Practice presents performance requirements for the brake systems of motor vehicles intended for roadway use and falling into the following classifications: Light trucks and buses: 6001-10 000 lb (2700-4500 kg) gvw; Truck and bus: Over 10 000 lb (4500 kg) gvw; combination of vehicles towing vehicles over 10 000 lb (4500 kg) gvw. Acceptable performance requirements are based on data obtained from applicable sections of SAE J786a (March, 1978). The purpose of this recommended practice is to establish the minimum brake system performance requirements with regard to: 3.1 Stopping ability--of cold brakes, as affected by vehicle speed. 3.2 Stopping ability--of hot brakes, as affected by vehicle speed and duty cycle. 3.3 Pedal force (air pressure) requirements--maximum allowable. 3.4 Brake stability. 3.5 stopping ability and recovery of wet brakes. 3.6 Stopping ability of emergency brake system. 3.7 Brake effectiveness distribution for vehicles in combination.
HISTORICAL
1967-07-01
Standard
J992_196707
This SAE Recommended Practice presents performance requirements for the brake systems of motor vehicles intended for roadway use and falling into the following classifications: Light trucks and buses: 6001-10 000 lb (2700-4500 kg) gvw; Truck and bus: Over 10 000 lb (4500 kg) gvw; combination of vehicles towing vehicles over 10 000 lb (4500 kg) gvw. Acceptable performance requirements are based on data obtained from applicable sections of SAE J786a (March, 1978). The purpose of this recommended practice is to establish the minimum brake system performance requirements with regard to: 3.1 Stopping ability--of cold brakes, as affected by vehicle speed. 3.2 Stopping ability--of hot brakes, as affected by vehicle speed and duty cycle. 3.3 Pedal force (air pressure) requirements--maximum allowable. 3.4 Brake stability. 3.5 stopping ability and recovery of wet brakes. 3.6 Stopping ability of emergency brake system. 3.7 Brake effectiveness distribution for vehicles in combination.
HISTORICAL
1985-03-01
Standard
J992_198503
This SAE Recommended Practice presents performance requirements for the brake systems of motor vehicles intended for roadway use and falling into the following classifications: Light trucks and buses: 6001-10 000 lb (2700-4500 kg) gvw; Truck and bus: Over 10 000 lb (4500 kg) gvw; combination of vehicles towing vehicles over 10 000 lb (4500 kg) gvw. Acceptable performance requirements are based on data obtained from applicable sections of SAE J786a (March, 1978). The purpose of this recommended practice is to establish the minimum brake system performance requirements with regard to: 3.1 Stopping ability--of cold brakes, as affected by vehicle speed. 3.2 Stopping ability--of hot brakes, as affected by vehicle speed and duty cycle. 3.3 Pedal force (air pressure) requirements--maximum allowable. 3.4 Brake stability. 3.5 stopping ability and recovery of wet brakes. 3.6 Stopping ability of emergency brake system. 3.7 Brake effectiveness distribution for vehicles in combination.
HISTORICAL
1969-06-01
Standard
J992A_196906
This SAE Recommended Practice presents performance requirements for the brake systems of motor vehicles intended for roadway use and falling into the following classifications: Light trucks and buses: 6001-10 000 lb (2700-4500 kg) gvw; Truck and bus: Over 10 000 lb (4500 kg) gvw; combination of vehicles towing vehicles over 10 000 lb (4500 kg) gvw. Acceptable performance requirements are based on data obtained from applicable sections of SAE J786a (March, 1978). The purpose of this recommended practice is to establish the minimum brake system performance requirements with regard to: 3.1 Stopping ability--of cold brakes, as affected by vehicle speed. 3.2 Stopping ability--of hot brakes, as affected by vehicle speed and duty cycle. 3.3 Pedal force (air pressure) requirements--maximum allowable. 3.4 Brake stability. 3.5 stopping ability and recovery of wet brakes. 3.6 Stopping ability of emergency brake system. 3.7 Brake effectiveness distribution for vehicles in combination.
HISTORICAL
1980-02-01
Standard
J1250_198002
This SAE Recommended Practice establishes a uniform practical series of subprocedures for level road testing of the brake performance of vehicles with gross vehicle weight ratings over 4500 kg (10 000 lb). The purpose of this practice is to establish a uniform method for use by operators and law enforcement agencies, to evaluate the condition of the brake systems of vehicles with GVWRs and GCWRs over 4500 kg (10 000 lb) under any condition of loading. By following the test procedures set forth, the operator and/or law enforcement agencies can ascertain if the vehicle meets the service brake and emergency brake stopping distance requirements of applicable State and Federal regulations.
Viewing 1 to 30 of 43