Search Results

Standard

Air Filter Element Test Method

2022-07-14

CURRENT

J1533_202207

This SAE test method establishes a uniform test procedure for determining the gravimetric (mass based) efficiency and pressure drop performance levels of operator enclosure panel type filters on off-road, self-propelled work machines used in earth moving, and forestry, as defined in SAE J1116 and for agricultural equipment as defined in ANSI/ASAE S390, and equipped with an operator enclosure with a powered fresh air system. ISO/TS 11155-1 may additionally be used, which describes the use of particle sizing devices to measure the fractional (particle size) efficiency of panel type filters for automotive cabin filter applications. Automotive cabin filters are similar to filters described in this procedure, and the ISO/TS 11155-1 test method is therefore directly applicable.

Standard

Air Filter Element Test Method

2019-07-03

HISTORICAL

J1533_201907

This SAE test method establishes a uniform test procedure for determining the gravimetric (mass based) efficiency and pressure drop performance levels of operator enclosure panel type filters on off-road, self-propelled work machines used in earth moving, and forestry, as defined in SAE J1116 and for agricultural equipment as defined in ANSI/ASAE S390, and equipped with an operator enclosure with a powered fresh air system. ISO/TS 11155-1 may additionally be used, which describes the use of particle sizing devices to measure the fractional (particle size) efficiency of panel type filters for automotive cabin filter applications. Automotive cabin filters are similar to filters described in this procedure, and the ISO/TS 11155-1 test method is therefore directly applicable.

Standard

OPERATOR ENCLOSURE AIR FILTER ELEMENT TEST PROCEDURE

1993-06-14

HISTORICAL

J1533_199306

This SAE Recommended Practice establishes a uniform test procedure for determining performance levels of operator enclosure panel type air filters on off-road, self-propelled work machines used in construction, general-purpose industrial, agriculture, and forestry as defined in SAE J1116 and equipped with an operator enclosure with a powered fresh air system.

Standard

HYDRAULIC SYSTEM DIAGRAMS AND ASSOCIATED TABLES FOR MARINE VEHICLES

1991-04-01

CURRENT

J1780_199104

This document establishes the requirements for technical content and format of hydraulic system diagrams. This document does not establish configuration requirements, material, or performance requirements for any system or component identified herein.

Standard

Clutch Dimensions for Truck and Bus Applications

2017-08-14

CURRENT

J1806_201708

Although not limited to, these clutches are normally used on trucks considered as Medium-Duty (Class 6 and 7), as well as Heavy-Duty (Class 8).

Standard

Clutch Dimensions for Truck and Bus Applications

1999-11-30

HISTORICAL

J1806_199911

Although not limited to, these clutches are normally used on trucks considered as Medium-Duty (Class 6 and 7), as well as Heavy-Duty (Class 8).

Standard

Torque Ratings for Power Take-off Mounting Pads

2003-07-25

HISTORICAL

J2662_200307

This SAE Recommended Practice is intended to serve as a reference for the amount of torque that a Power Take-Off can induce on the transmission mounting pad. This document will apply to six-bolt, eight-bolt, and rear mounted power take-offs.

Standard

Graphics-Based Service Information

2021-11-23

CURRENT

J2892_202111

This document establishes standard graphical symbols and color conventions for use in either still (static) or animated graphics used for communicating service information. This document’s purpose is to communicate conventions for using those symbols and colors to accurately and consistently communicate intended information via graphics-based documentation. These practices are intended for use in service procedures, assembly instructions, training materials, and similar applications when trying to minimize the amount of human natural language text used within the document. The still and animated graphical conventions referenced should support effective communication via paper and “traditional” electronic media. The conventions can also extend to documenting via additional electronic delivery paradigms such as augmented reality (AR).

Standard

Heavy Vehicle Controls Prioritization and Conflict Resolution

2020-10-26

CURRENT

J3081_202010

This document is written to address acceleration and deceleration control issues related to heavy-duty trucks and buses greater than 10000 GVW.

Standard

Vacuum Excavation and Sewer Cleaning Equipment Classification and Nomenclature

2019-11-19

CURRENT

J3106_201911

This document lists common terminology for vacuum excavation and sewer cleaning equipment, including component names and specific work completed by these machines. This document also illustrates some common types of equipment.

Standard

Low-Temperature Coolant Circuit Nomenclature and Applications

2018-11-08

CURRENT

J3136_201811

The document provides clarity related to multiple temperature coolant circuits used in on- and off-highway, gasoline, and light- to heavy-duty diesel engine cooling systems. Out of scope are the terms and definitions of thermal flow control valves used in either low- or high-temperature coolant circuits. This subject is covered in SAE J3142.

Standard

Performance Test for Air Conditioned Agricultural Equipment

1987-01-30

CURRENT

J1006_198701

Standard

OPERATOR CAB ENVIRONMENT FOR HEATED, VENTILATED, AND AIR CONDITIONED CONSTRUCTION AND INDUSTRIAL EQUIPMENT

1976-04-01

HISTORICAL

J1129_197604

This Information Report establishes the following minimum per formance levels in the operator’s environment:

Standard

MINIMUM PERFORMANCE CRITERIA FOR BRAKING SYSTEMS FOR SELF-PROPELLED, SMOOTH STEEL WHEEL, PNEUMATIC TIRED OR MULTIPLE PROJECTION STEEL WHEEL ROLLERS AND COMPACTORS

1976-04-01

HISTORICAL

J1136_197604

Minimum performance criteria for service braking systems, emergency stopping systems, and parking systems for all self-propelled vibratory and static weight smooth steel wheel, pneumatic tired or multiple projection steel wheel rollers and compactors are provided in this S.A.E. recommended practice.

Standard

Lighting and Marking of Agricultural Equipment on Highways

1989-06-01

CURRENT

J137_198906

To provide specifications for lighting and marking of agricultural equipment whenever such equipment is operated or traveling on a highway.

Standard

USE OF TERMS YIELD STRENGTH AND YIELD POINT

1991-06-01

HISTORICAL

J450_199106

The purpose of this SAE Recommended Practice is to describe the terms yield strength and yield point. Included are definitions for both terms and recommendations for their use and application.

Standard

USE OF TERMS YIELD STRENGTH AND YIELD POINT

1984-06-01

HISTORICAL

J450_198406

Standard

SMALL SPARK IGNITION ENGINE TEST CODE

1974-06-01

HISTORICAL

J607A_197406

The purpose of this code is to provide a uniform means of comparing small gasoline engines. It is not intended as a laboratory manual. The code is considered the nearest present-day practical approach. Governor characteristics are considered part of the end item specification.

Standard

CERTIFICATES OF MAXIMUM NET HORSEPOWER FOR MOTOR TRUCKS AND TRUCK TRACTORS

1965-02-01

HISTORICAL

J690_196502

Standard

Dynamic Wireless Power Transfer for both Light and Heavy Duty Vehicles (SAE RP J2954/3)

2023-04-20

WIP

J2954/3

The SAE J2954 standard establishes an industry-wide specification that defines acceptable criteria for Light Duty EVs and SAE RP J2954/2 establishes the same for Heavy Duty. SAE RP SAE J2954. SAE RP J2954/3 establishes interoperability, electromagnetic compatibility, EMF, minimum performance, safety, and testing for dynamic wireless power transfer (D-WPT) of both light and heavy duty plug-in electric vehicles. The specification defines various charging levels that are based on the levels defined for SAE J1772 conductive AC charge levels as SAE J2954/1 & SAE J2954/2 with some variations. A standard for WPT based on these charge levels enables selection of a charging rate based on vehicle requirements, thus allowing for better vehicle packaging and ease of customer use. SAE J2954/3 addresses unidirectional charging, from grid to vehicle; bidirectional energy transfer may be evaluated for a future standard.