Search Results

Standard

Clutch Application Powertrain Startability Rating Requirements for Truck and Bus Applications

2004-08-25

HISTORICAL

J2469_200408

Although not limited to, these installations are normally used on trucks considered as Medium Duty (Class 6 and 7), as well as Heavy Duty (Class 8).

Standard

Clutch Application Powertrain Startability Rating Requirements for Truck and Bus Applications

2017-09-19

CURRENT

J2469_201709

Although not limited to, these installations are normally used on trucks considered as Medium Duty (Class 6 and 7), as well as Heavy Duty (Class 8).

Standard

Tire Size Differential - Articulated Wheel Loader

2019-11-20

CURRENT

J2204_201911

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

Standard

TIRE SIZE DIFFERENTIAL—ARTICULATED WHEEL LOADER

1994-05-01

HISTORICAL

J2204_199405

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

Standard

Clutch Dimensions for Truck and Bus Applications

2017-08-14

CURRENT

J1806_201708

Although not limited to, these clutches are normally used on trucks considered as Medium-Duty (Class 6 and 7), as well as Heavy-Duty (Class 8).

Standard

Clutch Dimensions for Truck and Bus Applications

1999-11-30

HISTORICAL

J1806_199911

Although not limited to, these clutches are normally used on trucks considered as Medium-Duty (Class 6 and 7), as well as Heavy-Duty (Class 8).

Standard

Clutch Installation and Release Linkage Requirements for Truck and Bus Application

2017-11-03

CURRENT

J2407_201711

Although not limited to, these installations are normally used on trucks considered as Medium Duty (Class 6 and 7), as well as Heavy Duty (Class 8).

Standard

Stationary Sound Testing of Snowmobiles, Procedure and Enforcement Issues

2007-11-15

HISTORICAL

J2641_200711

This SAE Information Report provides basic information about the issues surrounding the administration of stationary, infield sound testing of snowmobiles. The information provided herein is meant to enhance safety, improve the environment and promote uniform testing.

Standard

Stationary Sound Testing of Snowmobiles, Procedure and Enforcement Issues

2015-11-24

HISTORICAL

J2641_201511

This SAE Information Report provides basic information about the issues surrounding the administration of stationary, infield sound testing of snowmobiles. The information provided herein is meant to enhance safety, improve the environment and promote uniform testing.

Standard

Stationary Sound Testing of Snowmobiles, Procedure and Enforcement Issues

2021-05-13

CURRENT

J2641_202105

This SAE Information Report provides basic information about the issues surrounding the administration of stationary, infield sound testing of snowmobiles. The information provided herein is meant to enhance safety, improve the environment, and promote uniform testing.

Standard

Test Method to Obtain Lug-Up Torque Data for Heavy-Duty Truck and Bus Engines

2001-04-25

CURRENT

J2548_200104

This SAE Recommended Practice applies to all forms of diesel and natural gas engines fueled by the combination of diesel fuel and natural gas.

Standard

Torque Ratings for Power Take-off Mounting Pads

2003-07-25

HISTORICAL

J2662_200307

This SAE Recommended Practice is intended to serve as a reference for the amount of torque that a Power Take-Off can induce on the transmission mounting pad. This document will apply to six-bolt, eight-bolt, and rear mounted power take-offs.

Standard

Low-Temperature Coolant Circuit Nomenclature and Applications

2018-11-08

CURRENT

J3136_201811

The document provides clarity related to multiple temperature coolant circuits used in on- and off-highway, gasoline, and light- to heavy-duty diesel engine cooling systems. Out of scope are the terms and definitions of thermal flow control valves used in either low- or high-temperature coolant circuits. This subject is covered in SAE J3142.

Standard

Recreation Off-Road Vehicle Product Identification Numbering System

2012-05-07

CURRENT

ICS1000_201205

This document specifies the format, content and parameters for a product identification numbering system for off-road recreation vehicles, based on the PIN structure for earth-moving machinery in ISO 10261:2002E and is not applicable to the identification of components or attachments. This standard applies only to the off-road recreation vehicle industry and does not impose parameters for the marine, lawn and garden, silviculture, husbandry, construction or earth moving sectors.

Standard

OPERATOR CONTROLS FOR AGRICULTURAL WHEELED TRACTORS

1984-12-01

HISTORICAL

J841_198412

Standard

Lighting and Marking of Agricultural Equipment on Highways

1989-06-01

CURRENT

J137_198906

To provide specifications for lighting and marking of agricultural equipment whenever such equipment is operated or traveling on a highway.

Standard

Classification and Nomenclature Towing Winch for Skidders and Crawler Tractors

2022-03-31

CURRENT

J1014_202203

This SAE Standard includes only those towing winches commonly used on skidders and crawler tractors. These winches are used on self-propelled machines described in SAE J1057, J1116, and J1209. Specifically excluded are those winches used for hoisting operations.

Standard

COMPONENT NOMENCLATURE—TOWING WINCH

1977-06-01

HISTORICAL

J1014_197706

Standard

Classification and Nomenclature Towing Winch for Skidders and Crawler Tractors

2004-05-19

HISTORICAL

J1014_200405

This SAE Standard includes only those towing winches commonly used on skidders and crawler tractors. These winches are used on self-propelled machines described in SAE J1057, J1116, and J1209. Specifically excluded are those winches used for hoisting operations.

Standard

Classification and Nomenclature Towing Winch for Skidders and Crawler Tractors

2017-08-07

HISTORICAL

J1014_201708

This SAE Standard includes only those towing winches commonly used on skidders and crawler tractors. These winches are used on self-propelled machines described in SAE J1057, J1116, and J1209. Specifically excluded are those winches used for hoisting operations.