Refine Your Search

Date

Date

Topic

Topic

Author

Author

Commercial Vehicle Standard Casting Cleaning Suppliers Polymers

Search Results

Viewing 1 to 20 of 176
123Next >Last >>
Sort by relevance
Standard

Tire Size Differential - Articulated Wheel Loader
2019-11-20
CURRENT
J2204_201911
This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.
Standard

TIRE SIZE DIFFERENTIAL—ARTICULATED WHEEL LOADER
1994-05-01
HISTORICAL
J2204_199405
This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.
Standard

Recreation Off-Road Vehicle Product Identification Numbering System
2012-05-07
CURRENT
ICS1000_201205
This document specifies the format, content and parameters for a product identification numbering system for off-road recreation vehicles, based on the PIN structure for earth-moving machinery in ISO 10261:2002E and is not applicable to the identification of components or attachments. This standard applies only to the off-road recreation vehicle industry and does not impose parameters for the marine, lawn and garden, silviculture, husbandry, construction or earth moving sectors.
Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
2008-04-11
HISTORICAL
J1051_200804
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
2002-12-18
HISTORICAL
J1051_200212
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
2020-03-30
CURRENT
J1051_202003
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
2013-08-05
HISTORICAL
J1051_201308
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
Standard

Snowmobile Passenger Handgrips
2006-10-06
HISTORICAL
J1062_200610
This SAE Recommended Practice is intended to give information to engineers and designers in order that access to a passenger handgrip, when used, is easily obtained and that such handgrips offer maximum safety for a person at least as large as a 95th percentile adult male during snowmobile operation.
Standard

LUBRICATION CHART—CONSTRUCTION AND INDUSTRIAL MACHINERY
1982-06-01
HISTORICAL
J753_198206
The chart is to include basic maintenance items that the manufacturer considers essential for normal operation of the machine. The chart is not intended to cover all maintenance functions and should refer the user to the manufacturers’ manuals. Attachments may be included on the chart with the standard machine or covered by separate charts. When preparing a chart, consult SAE J752b, Maintenance Interval and SAE J754a. Lubricant Types.
Standard

REPORTING CLEANLINESS LEVELS OF HYDRAULIC FLUIDS
1986-03-01
HISTORICAL
J1165_198603
This SAE Recommended Practice has been formulated to advance and endorse the use of the ISO (International Organization for Standardization) Solid Contaminant Code as the universal means for expressing the level of particulate contaminant in hydraulic fluid and for specifying acceptable limits of cleanliness. Worldwide approval was gained for this coding system because it provides a simple, unmistakable, meaningful, and consistent means of communication between suppliers and users. The code applies to all types of hydraulic (liquid) fluids used in fluid power and control systems as applied to self-propelled machines as referenced in J1116.
Standard

HYDRAULIC EXCAVATOR OPERATOR CONTROLS
1978-04-01
HISTORICAL
J1177_197804
This recommended practice covers mobile hydraulic excavator controls and the specific arrangement and direction of motion for the primary controls.
Standard

SPECIFICATION DEFINITIONS—FELLER/BUNCHER
1979-01-01
HISTORICAL
J1255_197901
This recommended practice includes the definitions of specification terms most commonly used to describe both wheeled and crawler type machines.
Standard

SPECIFICATION DEFINITIONS—FELLER/BUNCHER
1985-01-01
HISTORICAL
J1255_198501
This recommended practice includes the definitions of specification terms most commonly used to describe both wheeled and crawler type machines.
Standard

TRUCK IDENTIFICATION TERMINOLOGY
1978-05-01
HISTORICAL
J1229_197805
This SAL Recommended Practice is intended to provide uniform nomenclature and definitions for the primary levels of vehicle identification, with particular application to trucks. While this specific terminology applies only to trucks, work is in progress to develop supplementary nomenclature and definitions pertaining to other commercial vehicle terms and to terms presently used interchangeably in passenger car, truck, or other commercial vehicle applications. The supplementary terms will be covered in subsequent revisions to this recommended practice.
Standard

Cutting Edge - Optional Cross-Sections and Dimensions Loader Straight
2011-10-25
CURRENT
J1581_201110
The purpose of this SAE Recommended Practice is to specify dimensions for loader straight cutting edge cross sections without holes and with bolt holes for mounting bolt-on teeth and tooth adaptors on loader buckets described by SAE J731. This recommended practice is intended to supplement SAE J1303 and SAE J1304 with cross sections for heavier duty applications, by identifying larger blunts, greater bevel angles, larger bolt holes, and greater bolt spacing.
Standard

Trailer Axle Alignment
2011-06-13
CURRENT
J875_201106
The scope of this SAE Recommended Practice, trailer axle alignment, is to identify the dimensional limits of, and a method to, establish a perpendicular relationship between the king pin centerline and the axle centerline at its midpoint. Various types of equipment are commercially available which can be used for this measurement which provides varying degrees of accuracy, but none can be endorsed by SAE. The most fundamental methods of measurement will be described here, but other equipment is available if a greater degree of accuracy is desired.
Standard

CAPACITY RATING—ELEVATING SCRAPERS
1993-06-01
HISTORICAL
J957_199306
This SAE Standard specifies a procedure for approximating the volume of a typical material carried in the bowl of an elevating scraper as defined in SAE J728 and SAE J1057. The volumes are based on the inside dimensions of the bowl and a representative volume on top of the bowl. This rating method is intended to provide a consistent means of comparing capacities; it is not intended to define actual capacities that might be observed in any specific application.
123Next >Last >>
X