Refine Your Search

Date

Date

Topic

Topic

Author

Author

Commercial Vehicle Materials properties Tools and equipment Cleaning Standard Suppliers Casting

Search Results

Viewing 1 to 20 of 371
123Next >Last >>
Sort by relevance
Standard

Tire Size Differential - Articulated Wheel Loader
2019-11-20
CURRENT
J2204_201911
This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.
Standard

TIRE SIZE DIFFERENTIAL—ARTICULATED WHEEL LOADER
1994-05-01
HISTORICAL
J2204_199405
This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.
Standard

Torque Ratings for Power Take-off Mounting Pads
2003-07-25
HISTORICAL
J2662_200307
This SAE Recommended Practice is intended to serve as a reference for the amount of torque that a Power Take-Off can induce on the transmission mounting pad. This document will apply to six-bolt, eight-bolt, and rear mounted power take-offs.
Standard

Recreation Off-Road Vehicle Product Identification Numbering System
2012-05-07
CURRENT
ICS1000_201205
This document specifies the format, content and parameters for a product identification numbering system for off-road recreation vehicles, based on the PIN structure for earth-moving machinery in ISO 10261:2002E and is not applicable to the identification of components or attachments. This standard applies only to the off-road recreation vehicle industry and does not impose parameters for the marine, lawn and garden, silviculture, husbandry, construction or earth moving sectors.
Standard

USE OF TERMS YIELD STRENGTH AND YIELD POINT
1991-06-01
HISTORICAL
J450_199106
The purpose of this SAE Recommended Practice is to describe the terms yield strength and yield point. Included are definitions for both terms and recommendations for their use and application.
Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
2008-04-11
HISTORICAL
J1051_200804
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
2002-12-18
HISTORICAL
J1051_200212
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
2020-03-30
CURRENT
J1051_202003
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
2013-08-05
HISTORICAL
J1051_201308
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
Standard

Snowmobile Passenger Handgrips
2006-10-06
HISTORICAL
J1062_200610
This SAE Recommended Practice is intended to give information to engineers and designers in order that access to a passenger handgrip, when used, is easily obtained and that such handgrips offer maximum safety for a person at least as large as a 95th percentile adult male during snowmobile operation.
Standard

INTERNAL COMBUSTION ENGINES—PISTON RINGS—MATERIAL SPECIFICATIONS
1992-10-01
HISTORICAL
J1590_199210
Differences, where they exist, are shown in Appendix A. This SAE Standard establishes a classification of materials intended for the manufacture of piston rings based on mechanical properties and the stresses that these materials are capable of withstanding. This document applies to the manufacture of piston rings up to and including 200 mm diameter for reciprocating internal combustion engines. It also applies to piston rings for compressors working under similar conditions.
Standard

Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS)
2008-04-14
HISTORICAL
J1119_200804
The purpose of this SAE Information Report is to provide concepts for rational selection and application of materials for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited to a consideration of steel with discussion on its mechanical properties and processing characteristics. Emphasis is placed on the toughness aspect (ability to resist brittle fracture) as this property is of paramount importance to structure integrity. It is emphasized that specific values for material properties have relevance to performance only in conjunction with specific design considerations such as structure size or weld joint detail and location.
Standard

Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS)
2002-09-20
HISTORICAL
J1119_200209
The purpose of this SAE Information Report is to provide concepts for rational selection and application of materials for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited to a consideration of steel with discussion on its mechanical properties and processing characteristics. Emphasis is placed on the toughness aspect (ability to resist brittle fracture) as this property is of paramount importance to structure integrity. It is emphasized that specific values for material properties have relevance to performance only in conjunction with specific design considerations such as structure size or weld joint detail and location.
123Next >Last >>
X