Search Results

This SAE test method establishes a uniform test procedure for determining the gravimetric (mass based) efficiency and pressure drop performance levels of operator enclosure panel type filters on off-road, self-propelled work machines used in earth moving, and forestry, as defined in SAE J1116 and for agricultural equipment as defined in ANSI/ASAE S390, and equipped with an operator enclosure with a powered fresh air system. ISO/TS 11155-1 may additionally be used, which describes the use of particle sizing devices to measure the fractional (particle size) efficiency of panel type filters for automotive cabin filter applications. Automotive cabin filters are similar to filters described in this procedure, and the ISO/TS 11155-1 test method is therefore directly applicable.

This SAE test method establishes a uniform test procedure for determining the gravimetric (mass based) efficiency and pressure drop performance levels of operator enclosure panel type filters on off-road, self-propelled work machines used in earth moving, and forestry, as defined in SAE J1116 and for agricultural equipment as defined in ANSI/ASAE S390, and equipped with an operator enclosure with a powered fresh air system. ISO/TS 11155-1 may additionally be used, which describes the use of particle sizing devices to measure the fractional (particle size) efficiency of panel type filters for automotive cabin filter applications. Automotive cabin filters are similar to filters described in this procedure, and the ISO/TS 11155-1 test method is therefore directly applicable.

This SAE Recommended Practice establishes a uniform test procedure for determining performance levels of operator enclosure panel type air filters on off-road, self-propelled work machines used in construction, general-purpose industrial, agriculture, and forestry as defined in SAE J1116 and equipped with an operator enclosure with a powered fresh air system.

This Information Report establishes the following minimum per formance levels in the operator’s environment:

The purpose of this Information Report is to establish minimum performance levels in the operator's environment for heated, ventilated, and air- conditioned construction and industrial equipment cabs. Also established are heating and air-conditioning test procedures for determining operator environment temperature, humidity, and pressurization. Note: The subject of noise is not treated in this information Report. This Information Report establishes the minimum performance levels in the operator's environment: Minimum cab pressurization and ventilation levels under all conditions of heating, air conditioning, and ventilation. Maximum humidity and minimum temperature differential under air conditioning operation. minimum temperature differential under heater operation. The report also establishes uniform test procedures for determining minimum performance levels, as defined under 2.1.1- 2.1.3, under Heater and Air conditioner operation.

This SAE Standard establishes uniform test procedures for the defrosting systems of off-road, self-propelled work machines used in construction, general purpose industrial, agricultural, forestry, and specialized mining machinery categories as identified in SAE J1116, JUN86. It includes tests that can be conducted with uniform test equipment in commercially available laboratory facilities, as well as in an appropriate outdoor environment.

This SAE Recommended Practice establishes a uniform test procedure for evaluating performance of operator enclosure pressurization systems for construction, general-purpose industrial, agricultural, forestry, and specialized mining machinery as categorized in SAE J1116 for off-road, self-propelled work machines.

This recommendation establishes a uniform test procedure for evaluating performance of agricultural equipment operator enclosure pressurization systems.

The purpose of this document is to establish air conditioning design guidelines that will apply to most systems rather than the specific design of any particular system. Operating conditions and characteristics of the equipment will determine the design of any successful system, and since these characteristics and conditions vary greatly from one application to another, the designer must determine the goals expected to be reached under the conditions encountered. To determine the capacity of such items as blowers, condenser fans, condenser coils, evaporator coils, filters, compressors, etc., will require the adherence to several guidelines, some of which are outlined in the following paragraphs.

SAE J3078/5 specifies a test method for testing defrosting systems. It is applicable to off-road self-propelled work machines as defined in SAE J1116 and agricultural tractors as defined in ANSI/ASAE S390. The full list of machines covered is included in Table 1.

SAE J3078/3 establishes a uniform test procedure for evaluating performance of operator enclosure pressurization systems. This standard is applicable to off-road, self-propelled work machine, as defined in SAE J1116, and includes tractors and machinery for agriculture and forestry as defined in ASABE standard ANSI/ASAE S390.

This SAE Standard applies to off-road, self-propelled work machines used in earth moving, agriculture, and forestry as defined in SAE J1116, and establishes the following minimum performance levels in the operator's environment for the seated position:

This SAE Standard applies to off-road, self-propelled work machines used in earth moving, agriculture, and forestry as defined in SAE J1116, and establishes the following minimum performance levels in the operator's environment for the seated position:

This SAE Recommended Practice applies to off-road, self-propelled work machines used in construction, general-purpose industrial, agricultural, forestry, and specialized mining machinery as defined in SAE J1116, and establishes the following minimum performance levels in the operator’s environment for the seated position:

SAE J3078 provides test methods and criteria for the evaluation of the operator enclosure environment in earth-moving machinery as defined in ISO 6165. SAE J3078/1 gives the terms and definitions which are used in other parts of SAE J3078. It is applicable to Off-Road Self-Propelled Work Machines as defined in SAE J1116 and tractors and machinery for agriculture and forestry as defined in ANSI/ASAE S390.

SAE J3078 provides test methods and criteria for the evaluation of the operator enclosure environment in earth-moving machinery as defined in ISO 6165. SAE J3078/1 gives the terms and definitions which are used in other parts of SAE J3078. It is applicable to Off-Road Self-Propelled Work Machines as defined in SAE J1116 and Agricultural Tractors as defined in ANSI/ASAE S390.

SAE J3078/2 provides a test method to determine filter performance for fresh and recirculation air filters used in operator enclosures with an air ventilation system. SAE J3078/2 is not applicable for testing vapor and gas filters. The category of machines covered includes off-road self-propelled work machines as defined in SAE J1116 and tractors and machinery for agriculture and forestry as defined in ASABE standard ANSI/ASAE S390.

SAE J3078/2 specifies two uniform test methods to determine performance levels for fresh and recirculation air filters used in operator enclosures with an air ventilation system. It is not applicable for testing vapor and gas filters. The category of machines covered include off-road self-propelled work machines as defined in SAE J1116 and tractors and machinery for agriculture and forestry as defined in ANSI/ASAE S390.