Search Results

One of the most promising solutions to address the twin problems of transport related pollution and energy security is to use alternative fuels. Compressed Natural gas (CNG) has been widely used in India to address the menace of pollution from commercial vehicles in cities like Delhi. Hydrogen blended compressed natural gas (HCNG) as a fuel has potential for further reducing harmful emissions and greenhouse gases. Enriching hydrogen in CNG improves combustion characteristic of CNG and reduces carbonyl emissions. Due to growing concerns over un-regulated emissions and their effect on human health, it is imperative to estimate un-regulated emissions from such alternatives for assessing overall impact of such fuels. Presently world over, emission legislations mainly addresses pollutants like CO, HC, NOx, CH4, NH3, PM etc. Relatively higher quantity in exhaust qualifies these pollutants to be monitored and controlled.

The growing transportation sector worldwide has opened up a way forward not only for the scientists & researchers but also for the OEMs to find out the options for fuel efficient automotive vehicles with reduced emissions during their usage. The demand of automotive vehicles has been doubled in last few years and in turn the market for lubricants and transmission fluids are flourishing. Several new formulations of lubricants are getting popularized with major suppliers to achieve the end user expectations in terms of fuel economy benefits, engine life and emissions. The market trend is continuously moving towards the improvement in lubricant formulation to the lower viscosity ranges and in this direction several companies are into development of multi-grade low viscosity range of engine oils (lubricants) which is said to be providing the benefits in terms of fuel economy.

In the light of major research work carried out on the detrimental health impacts of ultrafine particles (<50 nm), Euro VI emission standards incorporate a limit on particle number, of which ultrafine particles is the dominant contributor. As Compressed Natural Gas (CNG) is a cheaper and cleaner fuel when compared to diesel, there has been a steady increase in the number of CNG vehicles on road especially in the heavy duty segment. Off late, there has been much focus on the nature of particle emissions emanating from CNG engines as these particles mainly fall under the ultrafine particle size range. The combustion of lubricant is considered to be the dominant source of particle emissions from CNG engines. Particle emission due to lubricant is affected by the oil transport mechanisms into the combustion chamber which in turn vary with engine operating conditions as well as with the physico chemical properties of the lubricant.

Natural gas has been considered and implemented as alternative fuel to gasoline and diesel powered vehicles worldwide. Although natural gas belongs to petroleum fuel family, it has considerable recourses worldwide to ensure long energy security and comparatively lower carbon to hydrogen ratio that make it more environment friendly. This paper presents the effect of long duration endurance test on gas engine oil along with performance and emission characteristics of 5.8 L turbocharged heavy duty natural gas engine. The six cylinder engine was chosen due to its importance for urban bus transportation. The engine was subjected to long duration endurance test of 800 hrs with closed loop monitoring and controlled conditions as per 6 mode engine load cycle. During the complete endurance test of 800 hours, performance and emission characteristics of the engine were analyzed after completion of every 100 hours as per Full Throttle Performance Test and European Transient Cycle (ETC).

In this paper, experimental evaluation was carried out on a 6.0 L heavy duty CNG engine which has been optimized for 18 percent hydrogen blended CNG (HCNG). Optimization test results shows that use of HCNG results in reduced CO, THC & CH4 emissions by 39, 25 & 25 percent respectively and increase in NOx by 32 percent vis-a-vis CNG. After optimization the engine was subjected to endurance test of 600 hours as per 15 mode engine simulated city driving cycle with HCNG. The performance & emission characteristics of the engine were analyzed after completion of every 100 hours as per European Transient Cycle (ETC). Test results indicate that there were no significant changes observed in engine power output over the complete endurance test of 600 hrs with HCNG. Specific fuel consumption (SFC) measurements were consistent at all the 15 modes of engine simulated city driving cycle.

Depletion of fossil fuel reserves, the unsteadiness of their prices and the increasingly stricter exhaust emission legislation put forward attention of world towards use of alternate fuels. The ever increasing demand for ecologically friendly vehicles can be met by use of clean fuels like Compressed Natural Gas (CNG) and Hydrogen (H2). Lower carbon to hydrogen ratio of CNG makes it a cleaner fuel, due to this CNG is gaining popularity as an internal combustion (IC) engine fuel in transport sector. Hydrogen fuel for IC engines is also being considered as a future fuel due to its simple carbon less structure. However, several obstacles have to be overcome before widespread utilization of hydrogen as an IC engine fuel can occur in the transport sector. The 18 percent hydrogen enriched CNG fuel referred to as HCNG has the potential to lower emissions and could be considered a first step towards promotion of a Hydrogen economy.

The ever increasing demand of fuels for vehicles can only be met by use of alternate fuels like Compressed Natural Gas (CNG) and Hydrogen (H2). The 18 percent hydrogen enriched CNG fuel referred to as HCNG has the potential to lower emissions and is considered to be the first step towards promotion of a Hydrogen economy. While, automotive industry matures up with the usage of new engines, lubricant manufacturers are also moving on to the next stage by formulating oils to be used in gas engines such as CNG, HCNG etc. This paper presents the evaluation of gas engine oil on 6-cylinder heavy duty CNG engine using HCNG. The six cylinder engine was chosen due to its importance for urban bus transportation. The engine was optimized for using HCNG fuel. Initial performance of the engine using HCNG was compared vis-à-vis CNG and, thereafter, the engine was subjected to endurance test of 500 hours as per 8 mode engine simulated driving cycle.

In this paper, the characteristics of particle size distribution in the exhaust of a turbocharged 5.9 liter Cummins gas engine lubricated by two commonly used oils of different viscometrics (15W-40 and 20W-50) have been investigated. The study also attempts to differentiate the performance of the lubricants on the basis of fuel economy. A test procedure developed in- house was used for the evaluation, wherein the engine was operated at various speeds (1200-2800rpm) and load (25 %, 50% & 75%) conditions. Particle size distribution is measured using Engine Exhaust Particle Sizing Spectrometer (TSI EEPS Model 3090). Results indicate that a majority of the particle emissions are observed in the nucleation region (particle diameter < 50nm) and particle size distribution is found to significantly vary with engine speed.