Search Results

The objective of the project was to conduct controlled test-track studies of solutions for achieving higher fuel efficiency and lower greenhouse gas emissions in the trucking industry. Using vehicles from five Canadian fleets, technologies from 12 suppliers were chosen for testing, including aerodynamic devices and low rolling resistance tires. The participating fleets also decided to conduct tests for evaluating the impact on fuel consumption of vehicle speed, close-following between vehicles, and lifting trailer axles on unloaded B-trains. Other tests targeted comparisons between trans-container road-trains and van semi-trailers road-trains, between curtain-sided semi-trailers, trans-containers and van semi-trailers, and between tractors pulling logging semi-trailers loaded with tree-length wood and short wood. The impact of a heavy-duty bumper on fuel consumption and the influence of B5 biodiesel blend on fuel consumption were also assessed.

This study aimed to evaluate several rolling resistance reduction measures applicable to class 8 tractor-trailer combinations. Two methods have been employed: fuel consumption tests according to the SAE J1321 Joint TMC/SAE Fuel Consumption Test Procedure - Type II, and long-term operational observations using control and test vehicles monitored throughout baseline and test periods. One way to reduce the rolling resistance is to use wide-base tires: two different Type II fuel consumption tests revealed a more than 9 % improvement in fuel economy for a tractor-trailer combination equipped with wide-base tires. Long-term operational observation assessed the use of single wide-base tires on two 8-axle B-train tractor-trailer combinations. The results showed an average 5.11% fuel improvement and an average 4.37% energy intensity improvement. Other tests compared single-wide base tires with different tread patterns and tire compounds.

This project's objective was the development of an on-road vehicle fuel consumption test procedure for representative stop-and-go urban duty cycles. The scope of the project included a review of existing stop-and-go urban duty cycles, the development of a track testing methodology for measuring the fuel consumption on stop-and-go urban duty cycles, and testing with a view to the validation of the methodology. Literature review analyzed several transport activities to determine specific stop-and-go urban duty cycles, such as pick-up and delivery operations, refuse collection, bus transport, and utility and service operation. It was found that driving cycles should be easy enough to recreate and replicate on the test track and should be representative of application driving patterns. The cycles should be adapted for fuel economy testing, and geometric cycles are easier to follow than the cycles based on actual drive traces.