Search Results

Standard

DIESEL ENGINES—DIESEL FUEL—PERFORMANCE REQUIREMENT AND TEST METHOD FOR ASSESSING FUEL LUBRICITY

1995-06-01

HISTORICAL

J2265_199506

This SAE Standard specifies: a test method for assessing the lubricating property of diesel fuels including those which may contain a lubricity enhancing additive, and the performance criteria necessary to ensure reliable operation of diesel fuel injection equipment with respect to fuel lubrication of such equipment. It applies to fuel used in diesel engines.

Standard

Diesel Engines - Diesel Fuel – Performance Requirement and Test Method for Assessing Fuel Lubricity

2015-11-24

CURRENT

J2265_201511

This SAE Standard specifies: a test method for assessing the lubricating property of diesel fuels including those which may contain a lubricity enhancing additive, and the performance criteria necessary to ensure reliable operation of diesel fuel injection equipment with respect to fuel lubrication of such equipment. It applies to fuel used in diesel engines.

Standard

ROAD VEHICLES—HIGH PRESSURE FUEL INJECTION PIPE END—CONNECTIONS WITH 60 DEGREE FEMALE CONE

1988-10-01

HISTORICAL

J1949_198810

This SAE Standard specifies the dimensional requirements for the assembly of high-pressure pipe connections for compression-ignition (diesel) engine fuel injection equipment. It applies to 60 degrees female cones with external threaded connectors types 1 and 2 (see Figures 1, 2, and 3), and to the internal threaded tube nuts and male cone type end assembly (see Figure 4) of high-pressure pipe connections for tubes with diameters up to 12 mm inclusive.

Standard

Tapers for Shaft Ends and Hubs for Fuel Injection Pumps

1999-04-01

HISTORICAL

J1419_199904

This SAE Standard specifies the dimensional requirements necessary for the interchangeability of tapered shaft ends and hubs for fuel injection pumps of diesel engines.

Standard

Diesel Engines - Fuel Injection Pump Testing

2016-05-10

HISTORICAL

J1668_201605

The correct setting and adjustment of fuel injection pumps requires standardized testing conditions. This SAE Standard summarizes the design and operating parameters for test benches so that, using certain information supplied by the pump manufacturer, the pump test schedule, and certain information supplied by the test bench manufacturer, it can be determined whether a particular test bench is suitable for driving a particular injection pump. This document is in most cases a summary of the ISO Standard 4008, Parts 1, 2, and 3 and is intended to provide its critical aspects. Standard ISO 4008 should be referred to for more details.

Standard

Diesel Engines—Fuel Injection Pump Testing

1999-04-16

HISTORICAL

J1668_199904

The correct setting and adjustment of fuel injection pumps requires standardized testing conditions. This SAE Standard summarizes the design and operating parameters for test benches so that, using certain information supplied by the pump manufacturer, the pump test schedule, and certain information supplied by the test bench manufacturer, it can be determined whether a particular test bench is suitable for driving a particular injection pump. This document is in most cases a summary of the ISO Standard 4008, Parts 1, 2, and 3 and is intended to provide its critical aspects. Standard ISO 4008 should be referred to for more details.

Standard

Diesel Engines - Fuel Injection Pump Testing

2021-03-17

CURRENT

J1668_202103

The correct setting and adjustment of fuel injection pumps requires standardized testing conditions. This SAE Standard summarizes the design and operating parameters for test benches so that, using certain information supplied by the pump manufacturer, the pump test schedule, and certain information supplied by the test bench manufacturer, it can be determined whether a particular test bench is suitable for driving a particular injection pump. This document is in most cases a summary of the ISO Standard 4008, Parts 1, 2, and 3 and is intended to provide its critical aspects. Standard ISO 4008 should be referred to for more details.

Standard

Fuel Injection Pumps—High Pressure Pipes (Tubing) for Testing

2002-10-25

HISTORICAL

J1418_200210

This SAE Standard specifies the dimensional requirement of a range of high pressure pipes for use in the bench testing and setting of fuel injection pumps. Only dimensions and requirements affecting the hydraulic characteristic of the pipes are defined. Other requirements, such as the type of end connections and shape of the pipes when bent, are not included. These depend on the connections provided at pump outlets and injector inlets, and on the design features of individual pumps and test benches.

Standard

Diesel Fuel Injector Assembly Type 7 (9.5 mm)

2002-10-25

HISTORICAL

J347_200210

This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.

Standard

DIESEL FUEL INJECTOR ASSEMBLY TYPE (9.5 MM)

1995-07-10

HISTORICAL

J347_199507

This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.

Standard

DIESEL FUEL INJECTOR ASSEMBLY TYPE 7 (9.5 mm)

1988-07-01

HISTORICAL

J347_198807

This standard specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.

Standard

DIESEL FUEL INJECTION NOZZLE HOLDER ASSEMBLY (9.5 mm)

1977-10-01

HISTORICAL

J347A_197710

This SAE Recommended Practice has been developed for the use of diesel engine manufacturers requiring a nozzle holder assembly of small shank diameter for their engines.

Standard

DIESEL ENGINES—STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES (TUBING)

1995-06-25

HISTORICAL

J1958_199506

This SAE Standard specifies dimensions and requirements for single-wall steel tubing intended for use as high-pressure fuel injection pipes on a wide range of engines (Class A), and for fuel injection pump testing (Class B, Reference SAE J1418). Tubing shall be cold drawn, annealed or normalized, seamless tubing suitable for cold swaging, cold upsetting, and cold bending.

Standard

Diesel Engines—Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing)

2002-10-25

HISTORICAL

J1958_200210

This SAE Standard specifies dimensions and requirements for single-wall steel tubing intended for use as high-pressure fuel injection pipes on a wide range of engines (Class A), and for fuel injection pump testing (Class B, Reference SAE J1418). Tubing shall be cold drawn, annealed or normalized, seamless tubing suitable for cold swaging, cold upsetting, and cold bending.

Standard

Diesel Engines - Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing)

2015-11-24

CURRENT

J1958_201511

This SAE Standard specifies dimensions and requirements for single-wall steel tubing intended for use as high-pressure fuel injection pipes on a wide range of engines (Class A), and for fuel injection pump testing (Class B, Reference SAE J1418). Tubing shall be cold drawn, annealed or normalized, seamless tubing suitable for cold swaging, cold upsetting, and cold bending.

Standard

DIESEL ENGINES - STEEL TUBES FOR HIGH PRESSURE FUEL INJECTION PIPES (TUBING)

1989-04-01

HISTORICAL

J1958_198904

This SAE Standard specifies dimensions and requirements for single-wall steel tubing intended for use as high pressure fuel injection pipes on a wide range of engines (Class A), and for fuel injection pump testing (Class B, Reference SAE J1418). Tubing shall be cold drawn, annealed or normalized, seamless tubing suitable for cold swaging, cold upsetting and cold bending.

Standard

DIESEL FUEL INJECTOR ASSEMBLY TYPE 28 (9.5 MM)

1995-11-01

HISTORICAL

J1984_199511

This document specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.

Standard

Diesel Fuel Injector Assembly Type 28 (9.5 mm)

2002-10-25

HISTORICAL

J1984_200210

This document specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.

Standard

DIESEL FUEL INJECTOR ASSEMBLY TYPE 27 (9.5 mm)

1989-11-01

HISTORICAL

J1984_198911

This document specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.

Standard

DIESEL FUEL INJECTOR ASSEMBLY—TYPES 8, 9, 10, AND 11

1991-04-01

HISTORICAL

J265_199104

This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of four types of fuel injectors in diesel engines. Two of the types specified are flats-located injectors. The location and dimensions of the fuel inlet, leak-off connections, and type of attachment are not defined since they may vary according to the particular application.