Search Results

This paper presents the first of four parts of the academic design of an Attitude Control System (ACS) for the Multi-Mission Platform (MMP) and its migration to a Real Time Operating System. The MMP is a three axis stabilized artificial satellite now under development at the National Institute for Space Research (INPE). Such design applied some software engineering concepts as: 1)visual modeling; 2)automatic code generation; 3)automatic code migration; 4)soft real time simulation; and 5)hard real time simulation. A block diagram based modeling and a virtual time simulation of the MMP ACS in its nominal operational mode were built in the MatrixX 7.1 environment satisfying the three axis pointing and stabilization requirements. After that, its AutoCode module was used to generate C ANSI code representing the block diagram model. Time characteristics were added to the ACS generated code to make it the real time control software of MMP nominal operational mode.

This paper presents the automatic code generation process of the academic design of an Attitude Control System (ACS) for the Multi-Mission Platform (MMP). The MMP is a three axis stabilized artificial satellite now under development at the National Institute for Space Research (INPE). Such design applied some software engineering concepts as: 1)visual modeling; 2)automatic code generation; 3)automatic code migration; 4)soft real time simulation; and 5)hard real time simulation. A block diagram based modeling and a virtual time simulation of the MMP ACS in its nominal operational mode were built in the MatrixX 7.1 environment satisfying the three axis pointing and stabilization requirements. After that, its AutoCode module was used to generate C ANSI code representing the block diagram model. Four operating systems were used for code migration: 1)Windows 2000; 2)Mandrake Linux 10.1; 3)RedHawk Linux 2.1; and 4)RTEMS 4.6.2.

A constant challenge for the mobility engineering is to build correctly, the right product at the right time, cost and quality. This challenge gives opportunities to adopt new paradigms in system development, especially in generation, migration and tests of controller codes. This work presents the automatic generation, migration, and tests of real time code to an embedded controller. This is part of the Attitude and Orbit Control System (AOCS) for the Multi-Mission Platform (MMP) of the National Institute for Space Research (INPE). The modeling and simulation paradigm associated with automatic code generation makes possible the migration of a real time embedded controller code to a wide variety of target processors and/or Real Time Operating Systems (RTOS) using the same controller model. The MATRIXx (XMath/SystemBuild/AutoCode/DocumentIt) modeling and simulation environment was used to analyze and design the controller and generate its real time code.

This work presents the first part of the analysis, design and simulation of the reconfigurable control architecture for the Multi-Mission Platform (MMP), a generic service module currently under design at INPE. Its control system can be switched among nine main Modes of Operation. The implementation followed the specifications when they were found, otherwise it was designed. The manager block of the control system was implemented as a finite state machine. The tests were based in simulations with the MatriX/SystemBuild software. They focused mainly on the worst cases that the satellite is supposed to endure in its mission.

Computer systems aboard aerospace vehicles have become more and more distributed in an attempt to solve “real-life” problems such as commonality and longevity of components and subsystems. On the other hand, distributed systems pose a much bigger challenge in system design than traditional, “monolithic” systems, whereby functions are performed by a single component combining hardware and software. “Determinism” (predictability in the occurrence of events), “causality” (temporal ordination of occurrence of events) and “synchronism” (simultaneousness in the occurrence of events) can be pointed out as major challenges in system design. This paper shall survey methods of analyzing determinism in network communications in distributed computer systems aboard aerospace vehicles in different network topologies using a representative model.

This work presents the analysis, design and simulation of the reconfigurable control architecture for the contingency mode of the MultiMission Platform (MMP). The MMP is a generic service module currently under design at INPE. Its control system can be switched among nine main Modes of Operation and other Sub-Modes, according to ground command or information coming from the control system, mainly alarms. The implementation followed the specifications when they were found, otherwise it was designed. They cover operations from detumbling after launcher separation and solar acquisition, to achieving payload nominal attitude and orbital corrections maneuvers. The manager block of the control system was implemented as a finite state machine. The tests are based in simulations with the MatriX/SystemBuild software. They focused mainly on the worst cases that the satellite is supposed to endure in its mission, be it during modes or transitions between modes and submodes.

This paper presents some techniques for fault diagnosis in aerospace and automotive systems. A diagnosis technique is an algorithm to detect and isolate fault components in a dynamic process, such as sensor biases, actuator malfunctions, leaks and equipment deterioration. Fault diagnosis is the first step to achieve fault tolerance, but the redundancy has to be included in the system. This redundancy can be either by hardware or software. In situations in which it is not possible to use hardware redundancy only the analytical redundancy approach can be used to design fault diagnosis systems. Methods based on analytical redundancy need no extra hardware, since they are based on mathematical models of the system.

The Multimission Platform (MMP) is a generic service module currently in Project at INPE. In the 2001 version, its control system can be switched between nine main Operation Modes and other submodes, according to information from satellite sensors and ground commands. The Nominal Mode stabilizes the MMP in three axes and takes it to a nominal attitude, using three reaction wheels. Each wheel has coarse and fine acquisition submodes. The use of multiple modes of control for specific situations frequently is simpler than projecting a single controller for all cases. However, besides being harder to warrant its general stability, the mere switching between these submodes generates bumps, which can reduce the performance and even damage the actuator or plant. In this work, we present an application of diverse methods to smooth the transition between control submodes of the Nominal Mode of the MMP.

In critical real-time computer systems, whether aircraft, automotive and industrial products it is very common the use of a fixed priority scheduler. The fixed priority scheduler has shown a good performance in control applications even in different applications where it was adopted. But nowadays, to go forward with the technology, be it in hardware and software, schedulers with dynamic priority can be a better alternative in certain situations. The present work aims to show that a variable priority scheduler can improve the performance of a control system obtained with a fixed priority scheduler, even when it was bad conditioned. This study is based on a four motor position control system. For this, the study will make use of a specialized simulation tool. In the future, we intend to extend this study to schedulers that use random and sporadic tasks.

Many control systems switch between control modes according to necessity. That is often simpler than designing a full control to all situations. However, this creates new problems, as determining the composed system stability and the transient during switching. The latter, while temporary, may introduce overshooting that degrade performance and damage the plant. This is particularly true for the MultiMission Platform (MMP), a generic service module currently under design at INPE. Its control system can be switched among nine main Modes of Operation and other submodes, according to ground command or information coming from the control system, mainly alarms. It can acquire one and three axis stabilization in generic attitudes, with actuators including magnetotorquers, thrusters and reaction wheels.

Current systems such as satellites, aircrafts, automobiles, turbines, power controls and traffic controls are becoming increasingly complex and/or highly integrated as prescribed by the SAE-ARP-4754a Standard. Such systems operate in a real time distributed environment which frequently requires a common knowledge of time among different devices, levels and granularities. So, temporal correctness is mostly needed, besides logical correctness. It can be achieved by hardware clocks and devices, software clocks and algorithms, or both, to avoid or tolerate, within appropriate margins, the time faults or failures that may occur in aerospace and automotive systems. This paper presents an overview of clock synchronization algorithms and their uses in aerospace and automotive systems. It is based on a review of the literature, discussion and comparison of some clock synchronization algorithms with different policies.

Eigenstructure techniques allow to detect and isolate faulty components in a dynamic process, such as sensor biases, actuator malfunctions, changes in dynamic parameters due to leaks and deterioration. Fault detection is the first step to achieve fault tolerance, but for this the redundancy has to be included in the system. This redundancy can be either by hardware or by software. In situations in which it is not possible to use hardware redundancy only the software redundancy can be used. Therefore using eigenstructure techniques, for the fault detection and isolation, the tests can be done through the angle between the residue vector direction and the fault direction vector. By this way, we can reduce false alarm and the alarm loss rates due to the noise and changes in system parameters.

Real-time critical systems are those whose failures may cause loss of transactions/data, missions/batches, vehicles/properties, or even people/human life. Accordingly, some regulations prescribe their maximum acceptable probability of failures to range from about 10−4 to 10−10 failures per hour. Examples of such systems are the ones involving nuclear plants, aircrafts, satellites, automobiles, or traffic controls. They are becoming increasingly complex and/or highly integrated as prescribed by the SAE-ARP-4754A Standard. Those systems include, most of the time, real time critical software that must be specified, designed, implemented, validated, verified and accredited (VVA). To do that, models, specially the V-Model, are frequently adopted, together with methods and tools which perform software VVA to ensure compliance (of correctness, reliability, robustness, etc.) of software to several specific standards such as DO178-B/DO-178C (aviation) or IEC 26262 (automotive) among others.